Greetings again!
As a corollary / follow-up to my previous inquiry on automatic power-on when AC power applied, I'm now trying to get Panther (Asus ChromeBox - Haswell/Lynxpoint) to power on from S5 via a connected USB device (keyboard, mouse, IR remote) and via ethernet / wake-on-lan-- all of which currently work for S3, but not S5.
Initial testing indicates that the USB ports are not getting put in the D3/hot state, as the IR receiver doesn't blink to indicate button presses as it does in S3. Looking at the panther/lynxpoint code, the only places I found that the USB ports were enabled under S3 but not S5 were in panther/acpi_tables.c and lynxpoint/acpi/usb.asl. I modified both files to enable USB under S5, with no apparent change.
For WoL, I couldn't find anything that explicitly enabled/disabled it. I did try setting the WoL enable override bit in PMCON_3, but no apparent change.
Any/all suggestions are appreciated. I did skim the 4th-Gen Core Family PLatform I/O datasheet, but nothing jumped out at me there (other than the WoL override I tried above)
thanks, Matt
-
Matt DeVillier