Re: ATI rage xl.init

[YhLu]

You only commit 4 & 5 ?

-----邮件原件-----
发件人: Li-Ta Lo [mailto:[e-mail]] 
发送时间: 2004年4月21日 14:47
收件人: YhLu
抄送: ron minnich; Stefan Reinauer; LinuxBIOS
主题: Re: ATI rage xl.init

On Tue, 2004-04-20 at 19:38, YhLu wrote:
> Ron,
>
> Please commit ati rage xl support.
> ati rage xl support
> add btext_console to use rage xl fb.
> enable pnp init calling
> superio Winbond: real enable/disable device.
> superio Winbond: enable HW
> Tyan S2850 support update
> Tyan S2875 support added.
> Move some PCI master enable driver to /driver dir.
>
> Stefan,
>
> Please test the filo too, I add the btext_console into it.
> On vocation? Why using [e-mail] ?

there are some conflicts between your tree and the current
CVS. Could you do cvs update and send me the patch again ?

Ollie

ATI rage xl.init

[Li-Ta Lo]

On Fri, 2004-04-23 at 11:56, YhLu wrote:
> You only commit 4 & 5 ?

I haven't commit anything yet. I am busy working on
the ibm/e325 HT enumeration problem. I will look at
the patch next week.

Ollie
> -----邮件原件-----
> 发件人: Li-Ta Lo [mailto:[e-mail]] 
> 发送时间: 2004年4月21日 14:47
> 收件人: YhLu
> 抄送: ron minnich; Stefan Reinauer; LinuxBIOS
> 主题: Re: ATI rage xl.init
>
> On Tue, 2004-04-20 at 19:38, YhLu wrote:
> > Ron,
> >
> > Please commit ati rage xl support.
> > ati rage xl support
> > add btext_console to use rage xl fb.
> > enable pnp init calling
> > superio Winbond: real enable/disable device.
> > superio Winbond: enable HW
> > Tyan S2850 support update
> > Tyan S2875 support added.
> > Move some PCI master enable driver to /driver dir.
> >
> > Stefan,
> >
> > Please test the filo too, I add the btext_console into it.
> > On vocation? Why using [e-mail] ?
>
> there are some conflicts between your tree and the current
> CVS. Could you do cvs update and send me the patch again ?
>
> Ollie