Thanks, for the answers, i managed to get the vgabios running when i inserted the extracted vgabios (from awardeco) and inserted it with the dd command.
My next problem is trying to boot from my usb device using FILO version 0.5 from this "link" svn://openbios.org/filo/trunk/filo-0.5
"FILO version 0.5 (root@powertron) Fri Nov 10 02:05:10 CET 2006 Press <Enter> for default boot, or <Esc> for boot prompt... 1mlinuz root=/dev/sda1 console=tty0 console=ttyS0nd UHCI at 1800 uhc_reset: Resetting UHCI uhc_init: uhc_init setting framelist to: 1decb9f0 uhc_start: Starting UHCI dump_uhci: HCI at 00001800 uhc_init: Found UHCI at 1820 uhc_reset: Resetting UHCI"
The computer now "hangs" no boot nothing.
Using the filo from ehterboot, it get's to the "LinuxLabs USB bootloader" and that's as far as it goes.
Stock award bios managed to boot from this usbstick, What could be wrong, any suggestions?!
Thanks in advance Best regards Kurt.
Kurt André Selbach wrote:
Thanks, for the answers, i managed to get the vgabios running when i inserted the extracted vgabios (from awardeco) and inserted it with the dd command.
My next problem is trying to boot from my usb device using FILO version 0.5 from this "link" svn://openbios.org/filo/trunk/filo-0.5
"FILO version 0.5 (root@powertron) Fri Nov 10 02:05:10 CET 2006 Press <Enter> for default boot, or <Esc> for boot prompt... 1mlinuz root=/dev/sda1 console=tty0 console=ttyS0nd UHCI at 1800 uhc_reset: Resetting UHCI uhc_init: uhc_init setting framelist to: 1decb9f0 uhc_start: Starting UHCI dump_uhci: HCI at 00001800 uhc_init: Found UHCI at 1820 uhc_reset: Resetting UHCI"
The computer now "hangs" no boot nothing.
Using the filo from ehterboot, it get's to the "LinuxLabs USB bootloader" and that's as far as it goes.
Stock award bios managed to boot from this usbstick, What could be wrong, any suggestions?!
yhlu once pointed me to this http://www.linuxbios.org/index.php/Etherboot
Thanks!
-- Al
-
Al Boldi -
Kurt André Selbach