Re: [LinuxBIOS] s2881 build broken

[Lu, Yinghai]

If the compressed_stream is enabled, 
1. when build the payload.nrv2b_x, 
    if ratio <= 1, the head four byte will be "0x5a5a5a5a", and use
ori payload.
    else the head four byte will be "0xaaaaaaaa", and used
payload.nrv2b image instead.
2. when rom_steam_init is called, it will check the head signature to
decide if uncompress it, or just use it.

YH

-----Original Message-----
From: [e-mail]
[mailto:[e-mail]] On Behalf Of yhlu
Sent: Thursday, May 04, 2006 8:44 AM
To: Stefan Reinauer
Cc: Ward Vandewege; [e-mail]
Subject: Re: [LinuxBIOS] s2881 build broken

that will need another 4 byte header before the stream.

YH

On 5/4/06, Stefan Reinauer  wrote:
> yhlu  [060504 13:12]:
> > You revert the ilen print out?
>
> we could add that into the unrv2b() function, but I think we should

not
> change the API for debugging only.
> > if you nrv2b one zelf image, you will get more bigger ilen

instead...
> Can we detect whether we're decompressing a zelf image and print a
> message instead? or cause that the uncompressed version is used?
>
> Stefan