Dear LinuxBios people,
first at all, I am new in this staff and I am working in to port a PcChips M825G mainboard, I have found that the chip set vt8235 is already in the folder:
/freebios/src/southbrige/via/vt8235
I have been looking for information about how to add the new mainboard and how to build the files mainbord.c, irq_tables.c and Config, but I have not found the necessary information about. I wonder is somebody can help me.
Thanks for any help in advance,
Edmanuel
what northbridge is on that board?
ron
Dear Minnich,
Tahnks for your help, the main information is below, I hope it is enough but if you need something more just ask me, I will be very pleased to sent it to you.
Processor: AMD Athlon/Duron CPU on board, support 266/200MHz FSB
Chipset
northbridge: KM266 southbridge: 8235 Embedded ProSavage8 3D Graphics w/ 32M share memory LAN - VIA VT6103 10/100Mbps Fast Ethernet PHY Audio - VIA VT1612A 2-channel audio Codec -Compliant with AC97 2.2 specification
System BIOS
AMI 2Mb Flash ROM Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI Full support for ACPI revision 1.0 specification
Memory
2 x 184-pin DIMM sockets support two 2.5V DDR SDRAMs (DDR266/200) 2 x 168-pin DIMM sockets support two 3.3V SDRAMs (PC133/100) Maximum memory : 2GB
Best regards,
Edmanuel Torres
what northbridge is on that board?
ron
Edmanuel Torres
On Thu, 9 Dec 2004, Edmanuel Torres wrote:
northbridge: KM266
This is via, right? This will be trouble I am afraid. We do not support it now.
ron
I have found something about and I think is the same
VT8375 = KM266 VT8375 [KM266/KL266] Host Bridge
any sugesstion, what I can do about???
Edmanuel
On Thu, 9 Dec 2004, Edmanuel Torres wrote:
northbridge: KM266
This is via, right? This will be trouble I am afraid. We do not support it now.
ron
On Thu, 9 Dec 2004, Edmanuel Torres wrote:
I have found something about and I think is the same
VT8375 = KM266 VT8375 [KM266/KL266] Host Bridge
any sugesstion, what I can do about???
you're going to have to get those docs.
ron