Patch set updated for coreboot: abaf1ea pirq_routing: Allow routing with more than 4 PIRQ links

[Alexandru Gagniuc]

Alexandru Gagniuc ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1482

-gerrit

commit abaf1ea00ca838d17869311f07b95b0ab002a4e5
Author: Alexandru Gagniuc 
Date:   Thu Aug 23 02:32:58 2012 -0500

pirq_routing: Allow routing with more than 4 PIRQ links

pirq_routing_irqs assumed that only for links are available for PIRQ
    routing, INTA to INTD. Some chipsets provide more, up to INTH.
    When pirq_routing_irqs found a link number greater than 4 in the pirq table,
    it would not assign that IRQ. This is a shame, as it limits the flexibility
    of routing IRQs.
    Make the maximum number of links a Kconfig variable, and modify the code to
    respect it. This works beatifully on the VX900, which provides 8 routable
    interrupts.
    While we're at it, also refactor pirq_routing_irqs, and add some much
    needed comments.
    The copyrights added were determined from git log filename.

Change-Id: I4b565315404c65b871406f616474e2cc9e6e013e
    Signed-off-by: Alexandru Gagniuc 
---
 src/Kconfig                              | 12 ++++
 src/arch/x86/boot/pirq_routing.c         | 94 ++++++++++++++++++++++----------
 src/arch/x86/include/arch/pirq_routing.h | 29 ++++++++++
 3 files changed, 107 insertions(+), 28 deletions(-)

diff --git a/src/Kconfig b/src/Kconfig
index ccf8665..4ff078a 100644
--- a/src/Kconfig
+++ b/src/Kconfig
@@ -1,6 +1,7 @@
 ##
 ## This file is part of the coreboot project.
 ##
+## Copyright (C) 2012 Alexandru Gagniuc 
 ## Copyright (C) 2009-2010 coresystems GmbH
 ##
 ## This program is free software; you can redistribute it and/or modify
@@ -374,6 +375,17 @@ config HAVE_PIRQ_TABLE
      Whether or not the PIRQ table is actually generated by coreboot
      is configurable by the user via GENERATE_PIRQ_TABLE.

+config MAX_PIRQ_LINKS
+	int
+	default 4
+	help
+	  This variable specifies the number of PIRQ interrupt links which are
+	  routable. On most chipsets, this is 4, INTA through INTD. Some
+	  chipsets offer more than four links, commonly up to INTH. They may
+	  also have a separate link for ATA or IOAPIC interrupts. When the PIRQ
+	  table specifies links greater than 4, pirq_routing_irqs will not
+	  function properly, unless this variable is correctly set.
+
 #These Options are here to avoid "undefined" warnings.
 #The actual selection and help texts are in the following menu.

diff --git a/src/arch/x86/boot/pirq_routing.c b/src/arch/x86/boot/pirq_routing.c
index bb8a7b6..3316707 100644
--- a/src/arch/x86/boot/pirq_routing.c
+++ b/src/arch/x86/boot/pirq_routing.c
@@ -1,3 +1,22 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Alexandru Gagniuc 
+ * Copyright (C) 2010 Stefan Reinauer 
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see http://www.gnu.org/licenses/.
+ */
 #include <console/console.h>
 #include <arch/pirq_routing.h>
 #include <string.h>
@@ -97,13 +116,45 @@ unsigned long copy_pirq_routing_table(unsigned long addr)
 }

#if CONFIG_PIRQ_ROUTE
+static u8 pirq_get_next_free_irq(u8* pirq, u16 bitmap)
+{
+	int i, link;
+	u8 irq = 0;
+	for (i = 2; i <= 15; i++)
+	{
+		/* Can we assign this IRQ ? */
+		if (!((bitmap >> i) & 1))
+			continue;
+		/* We can, Now let's assume we can use this IRQ */
+		irq = i;
+		/* And assume we have not yet routed it */
+		int already_routed = 0;
+		/* Have we already routed it ? */
+		for(link = 0; link < CONFIG_MAX_PIRQ_LINKS; link++) {
+			if (pirq[link] == irq) {
+				already_routed = 1;
+				break;
+			}
+		}
+		/* If it's not yet routed, use it */
+		if(!already_routed)
+			break;
+		/* But if it was already routed, try the next one */
+		continue;
+	}
+	/* Now we got our IRQ */
+	return irq;
+}
+
 void pirq_routing_irqs(unsigned long addr)
 {
-	int i, j, k, num_entries;
-	unsigned char irq_slot[4];
-	unsigned char pirq[4] = {0, 0, 0, 0};
+	int i, intx, num_entries;
+	unsigned char irq_slot[MAX_INTX_ENTRIES];
+	unsigned char pirq[CONFIG_MAX_PIRQ_LINKS];
    struct irq_routing_table *pirq_tbl;

+	memset(pirq, 0, CONFIG_MAX_PIRQ_LINKS);
+
    pirq_tbl = (struct irq_routing_table *)(addr);
    num_entries = (pirq_tbl->size - 32) / 16;

@@ -113,37 +164,26 @@ void pirq_routing_irqs(unsigned long addr)
    	printk(BIOS_DEBUG, "PIRQ Entry %d Dev/Fn: %X Slot: %d\n", i,
    		pirq_tbl->slots[i].devfn >> 3, pirq_tbl->slots[i].slot);

-		for (j = 0; j < 4; j++) {
+		for (intx = 0; intx < MAX_INTX_ENTRIES; intx++) {

-			int link = pirq_tbl->slots[i].irq[j].link;
-			int bitmap = pirq_tbl->slots[i].irq[j].bitmap;
+			int link = pirq_tbl->slots[i].irq[intx].link;
+			int bitmap = pirq_tbl->slots[i].irq[intx].bitmap;
    		int irq = 0;

printk(BIOS_DEBUG, "INT: %c link: %x bitmap: %x  ",
-				'A' + j, link, bitmap);
+				'A' + intx, link, bitmap);

-			if (!bitmap|| !link || link > 4) {
+			if (!bitmap|| !link || link > CONFIG_MAX_PIRQ_LINKS) {

printk(BIOS_DEBUG, "not routed\n");
-				irq_slot[j] = irq;
+				irq_slot[intx] = irq;
    			continue;
    		}

/* yet not routed */
-			if (!pirq[link - 1]) {
-
-				for (k = 2; k <= 15; k++) {
-
-					if (!((bitmap >> k) & 1))
-						continue;
-
-					irq = k;
-
-					/* yet not routed */
-					if (pirq[0] != irq && pirq[1] != irq && pirq[2] != irq && pirq[3] != irq)
-						break;
-				}
-
+			if (!pirq[link - 1])
+			{
+				irq = pirq_get_next_free_irq(pirq, bitmap);
    			if (irq)
    				pirq[link - 1] = irq;
    		}
@@ -151,7 +191,7 @@ void pirq_routing_irqs(unsigned long addr)
    			irq = pirq[link - 1];

printk(BIOS_DEBUG, "IRQ: %d\n", irq);
-			irq_slot[j] = irq;
+			irq_slot[intx] = irq;
    	}

/* Bus, device, slots IRQs for {A,B,C,D}. */
@@ -159,10 +199,8 @@ void pirq_routing_irqs(unsigned long addr)
    		pirq_tbl->slots[i].devfn >> 3, irq_slot);
    }

-	printk(BIOS_DEBUG, "PIRQ1: %d\n", pirq[0]);
-	printk(BIOS_DEBUG, "PIRQ2: %d\n", pirq[1]);
-	printk(BIOS_DEBUG, "PIRQ3: %d\n", pirq[2]);
-	printk(BIOS_DEBUG, "PIRQ4: %d\n", pirq[3]);
+	for(i = 0; i < CONFIG_MAX_PIRQ_LINKS; i++)
+		printk(BIOS_DEBUG, "PIRQ%u: %d\n", i+1,  pirq[i]);

pirq_assign_irqs(pirq);
 }
diff --git a/src/arch/x86/include/arch/pirq_routing.h b/src/arch/x86/include/arch/pirq_routing.h
index 08ba535..a1c7b96 100644
--- a/src/arch/x86/include/arch/pirq_routing.h
+++ b/src/arch/x86/include/arch/pirq_routing.h
@@ -1,6 +1,35 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Alexandru Gagniuc 
+ * Copyright (C) 2012 Patrick Georgi 
+ * Copyright (C) 2010 Stefan Reinauer 
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see http://www.gnu.org/licenses/.
+ */
 #ifndef ARCH_PIRQ_ROUTING_H
 #define ARCH_PIRQ_ROUTING_H

+/* This is the maximum number on interrupt entries that a PCI device may have.
+ *   This is NOT the number of slots or devices in the system
+ *   This is NOT the number of entries in the PIRQ table
+ * This tells us that in the PIRQ table, we are going to have 4 link-bitmap
+ * entries per PCI device
+ * It is fixed at 4: INTA, INTB, INTC, and INTD
+ * CAUTION: If you change this, pirq_routing will not work correctly*/
+#define MAX_INTX_ENTRIES 4
+
 #if CONFIG_GENERATE_PIRQ_TABLE
 #include <stdint.h>