[PATCH]more kconfig

[Patrick Georgi]

Hi,

this time: AMD LX, AMD SC520, board by
iei, pcengines, technexion, technologics, thomson

All of them build, and pass my variables test.

Signed-off-by: Patrick Georgi

[Patrick Georgi]

Am Donnerstag, den 08.10.2009, 16:05 +0200 schrieb Patrick Georgi:
> Hi,
>
> this time: AMD LX, AMD SC520, board by
> iei, pcengines, technexion, technologics, thomson
>
> All of them build, and pass my variables test.
>
> Signed-off-by: Patrick Georgi

With patch

[Myles Watson]

> > All of them build, and pass my variables test.
> >
> > Signed-off-by: Patrick Georgi

Acked-by: Myles Watson

Thanks,
Myles

[Uwe Hermann]

On Thu, Oct 08, 2009 at 04:05:35PM +0200, Patrick Georgi wrote:
> Am Donnerstag, den 08.10.2009, 16:05 +0200 schrieb Patrick Georgi:
> > Hi,
> >
> > this time: AMD LX, AMD SC520, board by
> > iei, pcengines, technexion, technologics, thomson
> >
> > All of them build, and pass my variables test.
> >
> > Signed-off-by: Patrick Georgi

Acked-by: Uwe Hermann
> Index: src/mainboard/thomson/ip1000/Kconfig
>
> --- src/mainboard/thomson/ip1000/Kconfig	(Revision 0)
> +++ src/mainboard/thomson/ip1000/Kconfig	(Revision 0)
> @@ -0,0 +1,35 @@
> +config BOARD_THOMSON_IP1000
> bool "ip1000"

Will fix all boardnames later when Kconfig conversion is done, there are
multiple entries which are not quite correct (as per wiki), but this
can wait.
> select ARCH_X86
> select CPU_INTEL_SOCKET_PGA370
> select NORTHBRIDGE_INTEL_I82830
> select SOUTHBRIDGE_INTEL_I82801XX
> select SUPERIO_SMSC_SMSCSUPERIO
> select HAVE_PIRQ_TABLE
> select UDELAY_TSC

Why no "select CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2"? That's in the
Options.lb file too:

default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1

Uwe.