Patch set updated for coreboot: d678491 Add cache_as_ram_ht.inc with hyper-threading CPU support

[Kyösti Mälkki]

Kyösti Mälkki ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/604

-gerrit

commit d678491fdb594b6a872c78465851a8656dfcd4da
Author: Kyösti Mälkki 
Date:   Thu Feb 16 21:23:33 2012 +0200

Add cache_as_ram_ht.inc with hyper-threading CPU support

This variant of cache_as_ram.inc starts the sibling CPU processors
    and clears the cache disable bits (CR0.CD) in case a hyper-threading
    CPU is detected.

The code was developed for model_f25 from model_6ex.
    Some of the cache enable-disable logic seems spurious to me.

Change-Id: Ieabb86a7c47afb3e178cc75bb89dee3efe0c3d18
    Signed-off-by: Kyösti Mälkki 
---
 src/cpu/intel/car/cache_as_ram_ht.inc |  147 ++++++++++++++++++++++++++++++---
 1 files changed, 134 insertions(+), 13 deletions(-)

diff --git a/src/cpu/intel/car/cache_as_ram_ht.inc b/src/cpu/intel/car/cache_as_ram_ht.inc
index 4505e0e..139f63a 100644
--- a/src/cpu/intel/car/cache_as_ram_ht.inc
+++ b/src/cpu/intel/car/cache_as_ram_ht.inc
@@ -2,7 +2,9 @@
  * This file is part of the coreboot project.
  *
  * Copyright (C) 2000,2007 Ronald G. Minnich 
+ * Copyright (C) 2005 Tyan (written by Yinghai Lu for Tyan)
  * Copyright (C) 2007-2008 coresystems GmbH
+ * Copyright (C) 2012 Kyösti Mälkki 
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -25,6 +27,7 @@

/* Macro to access Local APIC registers at default base. */
 #define LAPIC(x)		$(LAPIC_DEFAULT_BASE | LAPIC_ ## x)
+#define START_IPI_VECTOR	((CONFIG_AP_SIPI_VECTOR >> 12) & 0xff)

#define CPU_PHYSMASK_HI  (1 << (CONFIG_CPU_MAXPHYADDR - 32) - 1)

@@ -40,12 +43,9 @@
 cache_as_ram:
    post_code(0x20)

-	/* Send INIT IPI to all excluding ourself. */
-	movl	LAPIC(ICR), %edi
-	movl	$(LAPIC_DEST_ALLBUT | LAPIC_INT_ASSERT | LAPIC_DM_INIT), %eax
-	movl	%eax, (%edi)
-
-	/* Zero out all fixed range and variable range MTRRs. */
+	/* Zero out all fixed range and variable range MTRRs.
+	 * For hyper-threaded CPU MTRRs are shared so we actually
+	 * clear them more than once, but we don't care. */
    movl	$mtrr_table, %esi
    movl	$((mtrr_table_end - mtrr_table) / 2), %edi
    xorl	%eax, %eax
@@ -58,12 +58,127 @@ clear_mtrrs:
    dec	%edi
    jnz	clear_mtrrs

+	post_code(0x21)
+
    /* Configure the default memory type to uncacheable. */
    movl	$MTRRdefType_MSR, %ecx
    rdmsr
    andl	$(~0x00000cff), %eax
    wrmsr

+	post_code(0x22)
+
+	/* Enable local apic. */
+	movl	$LAPIC_BASE_MSR, %ecx
+	rdmsr
+	andl	$(~CPU_PHYSMASK_HI), %edx
+	andl	$(~LAPIC_BASE_MSR_ADDR_MASK), %eax
+	orl	$(LAPIC_DEFAULT_BASE | LAPIC_BASE_MSR_ENABLE), %eax
+	wrmsr
+	andl	$LAPIC_BASE_MSR_BOOTSTRAP_PROCESSOR, %eax
+	jz	ap_init
+
+bsp_init:
+
+	post_code(0x23)
+
+	/* Send INIT IPI to all excluding ourself. */
+	movl	LAPIC(ICR), %edi
+	movl	$(LAPIC_DEST_ALLBUT | LAPIC_INT_ASSERT | LAPIC_DM_INIT), %eax
+1:	movl	%eax, (%edi)
+	movl	$0x30, %ecx
+2:	pause
+	dec	%ecx
+	jnz	2b
+	movl	(%edi), %ecx
+	andl	$LAPIC_ICR_BUSY, %ecx
+	jnz	1b
+
+	post_code(0x24)
+	
+	/* For a hyper-threading processor, cache must not be disabled
+	 * on an AP on the same physical package with the BSP.
+	 */
+	movl	$01, %eax
+	cpuid
+	btl	$28, %edx
+	jnc	sipi_complete
+	bswapl	%ebx
+	cmpb	$01, %bh
+	jbe	sipi_complete
+
+hyper_threading_cpu:
+
+	/* delay 10 ms */
+	movl	$10000, %ecx
+1:	inb	$0x80, %al
+	dec	%ecx
+	jnz	1b
+
+	post_code(0x25)
+
+	/* Send Start IPI to all excluding ourself. */
+	movl	LAPIC(ICR), %edi
+	movl	$(LAPIC_DEST_ALLBUT | LAPIC_DM_STARTUP | START_IPI_VECTOR), %eax
+1:	movl	%eax, (%edi)
+	movl	$0x30, %ecx
+2:	pause
+	dec	%ecx
+	jnz	2b
+	movl	(%edi), %ecx
+	andl	$LAPIC_ICR_BUSY, %ecx
+	jnz	1b
+
+	/* delay 250 us */
+	movl	$250, %ecx
+1:	inb	$0x80, %al
+	dec	%ecx
+	jnz	1b
+
+	post_code(0x26)
+
+	/* Wait for sibling CPU to start. */
+1:	movl	$(MTRRphysBase_MSR(0)), %ecx
+	rdmsr
+	andl	%eax, %eax
+	jnz	sipi_complete
+
+	movl	$0x30, %ecx
+2:	pause
+	dec	%ecx
+	jnz	2b
+	jmp	1b
+
+
+ap_init:
+	post_code(0x27)
+
+	/* Do not disable cache (so BSP can enable it). */
+        movl	%cr0, %eax
+	andl	$(~((1 << 30) | (1 << 29))), %eax
+	movl	%eax, %cr0
+
+	post_code(0x28)
+
+	/* MTRR registers are shared between HT siblings. */
+	movl	$(MTRRphysBase_MSR(0)), %ecx
+	movl	$(1<<12), %eax
+	xorl	%edx, %edx
+	wrmsr
+
+	post_code(0x29)
+
+ap_halt:
+	cli
+1:	hlt
+	jnz	1b
+
+
+
+sipi_complete:
+
+	post_code(0x2a)
+
    /* Set Cache-as-RAM base address. */
    movl	$(MTRRphysBase_MSR(0)), %ecx
    movl	$(CACHE_AS_RAM_BASE | MTRR_TYPE_WRBACK), %eax
@@ -82,6 +197,8 @@ clear_mtrrs:
    orl	$MTRRdefTypeEn, %eax
    wrmsr

+	post_code(0x2b)
+
 #if !CONFIG_INTEL_NETBURST
    /* Enable L2 cache Write-Back (WBINVD and FLUSH#).
     * This MSR does not exist on NetBurst architecture.
@@ -96,6 +213,8 @@ clear_mtrrs:
    wrmsr
 #endif

+	post_code(0x2c)
+	
    /* Enable cache (CR0.CD = 0, CR0.NW = 0). */
    movl	%cr0, %eax
    andl	$(~((1 << 30) | (1 << 29))), %eax
@@ -114,6 +233,8 @@ clear_mtrrs:
    orl	$(1 << 30), %eax
    movl	%eax, %cr0

+	post_code(0x2d)
+
 #if CONFIG_XIP_ROM_SIZE
    /* Enable cache for our code in Flash because we do XIP here */
    movl	$MTRRphysBase_MSR(1), %ecx
@@ -138,6 +259,8 @@ clear_mtrrs:
    andl	$(~((1 << 30) | (1 << 29))), %eax
    movl	%eax, %cr0

+	post_code(0x2e)
+
    /* Set up the stack pointer. */
 #if CONFIG_USBDEBUG
    /* Leave some space for the struct ehci_debug_info. */
@@ -151,14 +274,12 @@ clear_mtrrs:
    movl	%esp, %ebp
    pushl	%eax

-	post_code(0x23)
+	post_code(0x2f)

/* Call romstage.c main function. */
    call	main
    addl	$4, %esp

-	post_code(0x2f)
-
    post_code(0x30)

/* Disable cache. */
@@ -166,7 +287,7 @@ clear_mtrrs:
    orl	$(1 << 30), %eax
    movl	%eax, %cr0

-	post_code(0x31)
+	post_code(0x34)

/* Disable MTRR. */
    movl	$MTRRdefType_MSR, %ecx
@@ -174,18 +295,18 @@ clear_mtrrs:
    andl	$(~MTRRdefTypeEn), %eax
    wrmsr

-	post_code(0x31)
+	post_code(0x35)

invd

-	post_code(0x33)
+	post_code(0x36)

/* Enable cache. */
    movl	%cr0, %eax
    andl	$~((1 << 30) | (1 << 29)), %eax
    movl	%eax, %cr0

-	post_code(0x36)
+	post_code(0x37)

/* Disable cache. */
    movl	%cr0, %eax