2014-06-28 17:59 GMT+02:00 HacKurx hackurx@gmail.com:
Hi,
I just update coreboot on my motherboard and after reboot of my computer the chassis fan stopped working.
I did not have this problem with the version of coreboot from 1 March 2014: http://review.coreboot.org/#/c/5226/
Have you an idea of the problem? Thank you
No, I can't reproduce that (see console output below). Then again, I don't use the boxed fan ;)
Do(es) the fan(s) start when you put some load on your machine, to 'warm up' the APU? Play some 1080p video or compile a linux kernel, reusing your distribution's .config found in /boot/ or /proc/
coreboot-4.0-6334-g6a089e3 do jul 3 15:47:49 CEST 2014 starting... BSP Family_Model: 00610f01 cpu_init_detectedx = 00000000 agesawrapper_amdinitreset Fch OEM config in INIT RESET Done PCI: 00:14.4 bridge ctrl <- 0403 PCI: 00:14.4 cmd <- 01 PCI: 00:14.5 subsystem <- 1022/1410 PCI: 00:14.5 cmd <- 02 PCI: 00:14.7 subsystem <- 1022/1410 PCI: 00:14.7 cmd <- 06 PCI: 00:15.0 bridge ctrl <- 0003 PCI: 00:15.0 cmd <- 00 PCI: 00:15.1 bridge ctrl <- 0003 PCI: 00:15.1 cmd <- 07 PCI: 00:18.0 cmd <- 00 PCI: 00:18.1 subsystem <- 1022/1410 PCI: 00:18.1 cmd <- 00 PCI: 00:18.2 subsystem <- 1022/1410 PCI: 00:18.2 cmd <- 00 PCI: 00:18.3 subsystem <- 1022/1410 PCI: 00:18.3 cmd <- 00 PCI: 00:18.4 subsystem <- 1022/1410 PCI: 00:18.4 cmd <- 00 PCI: 00:18.5 subsystem <- 1022/1410 PCI: 00:18.5 cmd <- 00 PCI: 03:00.0 cmd <- 03 done. BS: BS_DEV_ENABLE times (us): entry 321 run 38403 exit 0 Initializing devices... Root Device init Root Device init 794 usecs CPU_CLUSTER: 0 init start_eip=0x00001000, code_size=0x00000031 Initializing CPU #0 CPU: vendor AMD device 610f01 CPU: family 15, model 10, stepping 01 Using generic cpu ops (good) Model 15 Init.
MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled
Enabling cache Setting up local apic... apic_id: 0x10 done. siblings = 03, CPU #0 initialized CPU1: stack_base 002c5000, stack_end 002c5ff8 Asserting INIT. Waiting for send to finish... +Deasserting INIT. Waiting for send to finish... +#startup loops: 2. Sending STARTUP #1 to 17. After apic_write. Startup point 1. Waiting for send to finish... +Sending STARTUP #2 to 17. After apic_write. Startup point 1. Waiting for send to finish... +After Startup. Initializing CPU #1 CPU: vendor AMD device 610f01 CPU: family 15, model 10, stepping 01 Using generic cpu ops (good) Model 15 Init.
MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled
Enabling cache Setting up local apic... apic_id: 0x11 done. siblings = 03, CPU #1 initialized CPU2: stack_base 002c4000, stack_end 002c4ff8 Asserting INIT. Waiting for send to finish... +Deasserting INIT. Waiting for send to finish... +#startup loops: 2. Sending STARTUP #1 to 18. After apic_write. Startup point 1. Waiting for send to finish... +Sending STARTUP #2 to 18. After apic_write. Startup point 1. Waiting for send to finish... +After Startup. Initializing CPU #2 CPU: vendor AMD device 610f01 CPU: family 15, model 10, stepping 01 Using generic cpu ops (good) Model 15 Init.
MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled
Enabling cache Setting up local apic... apic_id: 0x12 done. siblings = 03, CPU #2 initialized CPU3: stack_base 002c3000, stack_end 002c3ff8 Asserting INIT. Waiting for send to finish... +Deasserting INIT. Waiting for send to finish... +#startup loops: 2. Sending STARTUP #1 to 19. After apic_write. Startup point 1. Waiting for send to finish... +Sending STARTUP #2 to 19. After apic_write. Startup point 1. Waiting for send to finish... +After Startup. Initializing CPU #3 Waiting for 1 CPUS to stop CPU: vendor AMD device 610f01 CPU: family 15, model 10, stepping 01 Using generic cpu ops (good) Model 15 Init.
MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled
Enabling cache Setting up local apic... apic_id: 0x13 done. siblings = 03, CPU #3 initialized All AP CPUs stopped (1219 loops) CPU1: stack: 002c5000 - 002c6000, lowest used address 002c5dc8, stack used: 568 bytes CPU2: stack: 002c4000 - 002c5000, lowest used address 002c4dc8, stack used: 568 bytes CPU3: stack: 002c3000 - 002c4000, lowest used address 002c3dc8, stack used: 568 bytes CPU_CLUSTER: 0 init 153026 usecs PCI: 00:00.0 init PCI: 00:00.0 init 830 usecs PCI: 00:01.0 init In CBFS, ROM address for PCI: 00:01.0 = ffc00778 PCI expansion ROM, signature 0xaa55, INIT size 0xfa00, data ptr 0x01b4 PCI ROM image, vendor ID 1002, device ID 9904, PCI ROM image, Class Code 030000, Code Type 00 Copying VGA ROM Image from ffc00778 to 0xc0000, 0xfa00 bytes Real mode stub @00000600: 867 bytes Calling Option ROM... ... Option ROM returned. VGA Option ROM was run PCI: 00:01.0 init 77789 usecs PCI: 00:01.1 init PCI: 00:01.1 init 830 usecs PCI: 00:10.0 init PCI: 00:10.0 init 830 usecs PCI: 00:10.1 init PCI: 00:10.1 init 830 usecs PCI: 00:11.0 init PCI: 00:11.0 init 830 usecs PCI: 00:12.0 init PCI: 00:12.0 init 830 usecs PCI: 00:12.2 init PCI: 00:12.2 init 830 usecs PCI: 00:13.0 init PCI: 00:13.0 init 830 usecs PCI: 00:13.2 init PCI: 00:13.2 init 826 usecs PCI: 00:14.0 init IOAPIC: Initializing IOAPIC at 0xfec00000 IOAPIC: Bootstrap Processor Local APIC = 0x10 IOAPIC: ID = 0x04 IOAPIC: Dumping registers reg 0x0000: 0x04000000 reg 0x0001: 0x00178021 reg 0x0002: 0x04000000 IOAPIC: 24 interrupts IOAPIC: Enabling interrupts on FSB IOAPIC: reg 0x00000000 value 0x10000000 0x00000700 IOAPIC: reg 0x00000001 value 0x00000000 0x00010000 IOAPIC: reg 0x00000002 value 0x00000000 0x00010000 IOAPIC: reg 0x00000003 value 0x00000000 0x00010000 IOAPIC: reg 0x00000004 value 0x00000000 0x00010000 IOAPIC: reg 0x00000005 value 0x00000000 0x00010000 IOAPIC: reg 0x00000006 value 0x00000000 0x00010000 IOAPIC: reg 0x00000007 value 0x00000000 0x00010000 IOAPIC: reg 0x00000008 value 0x00000000 0x00010000 IOAPIC: reg 0x00000009 value 0x00000000 0x00010000 IOAPIC: reg 0x0000000a value 0x00000000 0x00010000 IOAPIC: reg 0x0000000b value 0x00000000 0x00010000 IOAPIC: reg 0x0000000c value 0x00000000 0x00010000 IOAPIC: reg 0x0000000d value 0x00000000 0x00010000 IOAPIC: reg 0x0000000e value 0x00000000 0x00010000 IOAPIC: reg 0x0000000f value 0x00000000 0x00010000 IOAPIC: reg 0x00000010 value 0x00000000 0x00010000 IOAPIC: reg 0x00000011 value 0x00000000 0x00010000 IOAPIC: reg 0x00000012 value 0x00000000 0x00010000 IOAPIC: reg 0x00000013 value 0x00000000 0x00010000 IOAPIC: reg 0x00000014 value 0x00000000 0x00010000 IOAPIC: reg 0x00000015 value 0x00000000 0x00010000 IOAPIC: reg 0x00000016 value 0x00000000 0x00010000 IOAPIC: reg 0x00000017 value 0x00000000 0x00010000 PCI: 00:14.0 init 66902 usecs PCI: 00:14.2 init PCI: 00:14.2 init 830 usecs PCI: 00:14.3 init RTC Init PCI: 00:14.3 init 1284 usecs PCI: 00:14.4 init PCI: 00:14.4 init 830 usecs PCI: 00:14.5 init PCI: 00:14.5 init 830 usecs PCI: 00:14.7 init PCI: 00:14.7 init 826 usecs PCI: 00:15.0 init PCI: 00:15.0 init 830 usecs PCI: 00:15.1 init PCI: 00:15.1 init 830 usecs PCI: 00:18.0 init PCI: 00:18.0 init 830 usecs PCI: 00:18.1 init PCI: 00:18.1 init 830 usecs PCI: 00:18.2 init PCI: 00:18.2 init 830 usecs PCI: 00:18.3 init PCI: 00:18.3 init 830 usecs PCI: 00:18.4 init PCI: 00:18.4 init 830 usecs PCI: 00:18.5 init PCI: 00:18.5 init 830 usecs PNP: 002e.1 init PNP: 002e.1 init 786 usecs PNP: 002e.4 init ITE IT8728F Super I/O HWM: Initializing Hardware Monitor.. ITE IT8728F Super I/O HWM: Base Address at 0x295 PNP: 002e.4 init 5574 usecs PNP: 002e.5 init Keyboard init... No PS/2 keyboard detected. PNP: 002e.5 init 143934 usecs PNP: 002e.7 init PNP: 002e.7 init 787 usecs PCI: 03:00.0 init PCI: 03:00.0 init 830 usecs Devices initialized Show all devs...After init. Root Device: enabled 1 CPU_CLUSTER: 0: enabled 1 APIC: 10: enabled 1 DOMAIN: 0000: enabled 1 PCI: 00:00.0: enabled 1 PCI: 00:01.0: enabled 1 PCI: 00:01.1: enabled 1 PCI: 00:02.0: enabled 0 PCI: 00:03.0: enabled 0 PCI: 00:04.0: enabled 0 PCI: 00:05.0: enabled 0 PCI: 00:06.0: enabled 0 PCI: 00:07.0: enabled 0 PCI: 00:08.0: enabled 0 PCI: 00:10.0: enabled 1 PCI: 00:10.1: enabled 1 PCI: 00:11.0: enabled 1 PCI: 00:12.0: enabled 1 PCI: 00:12.2: enabled 1 PCI: 00:13.0: enabled 1 PCI: 00:13.2: enabled 1 PCI: 00:14.0: enabled 1 I2C: 01:50: enabled 1 I2C: 01:51: enabled 1 PCI: 00:14.1: enabled 0 PCI: 00:14.2: enabled 1 PCI: 00:14.3: enabled 1 PNP: 002e.0: enabled 0 PNP: 002e.1: enabled 1 PNP: 002e.2: enabled 0 PNP: 002e.3: enabled 0 PNP: 002e.4: enabled 1 PNP: 002e.5: enabled 1 PNP: 002e.6: enabled 0 PNP: 002e.7: enabled 1 PNP: 002e.a: enabled 0 PCI: 00:14.4: enabled 1 PCI: 00:14.5: enabled 1 PCI: 00:14.6: enabled 0 PCI: 00:14.7: enabled 1 PCI: 00:15.0: enabled 1 PCI: 00:15.1: enabled 1 PCI: 00:15.2: enabled 0 PCI: 00:15.3: enabled 0 PCI: 00:18.0: enabled 1 PCI: 00:18.1: enabled 1 PCI: 00:18.2: enabled 1 PCI: 00:18.3: enabled 1 PCI: 00:18.4: enabled 1 PCI: 00:18.5: enabled 1 APIC: 11: enabled 1 APIC: 12: enabled 1 APIC: 13: enabled 1 PCI: 03:00.0: enabled 1 BS: BS_DEV_INIT times (us): entry 0 run 569533 exit 0 CBMEM region bf120000-bfffffff (cbmem_check_toc) CBMEM region bf120000-bfffffff (cbmem_initialize_empty) Adding CBMEM entry as no. 1 Moving GDT to bf120200...ok Adding CBMEM entry as no. 2 Finalize devices... Devices finalized Adding CBMEM entry as no. 3 DmiTable:0, AcpiPstatein: 10010126, AcpiSrat:0,AcpiSlit:0, Mce:100111ba, Cmc:1001127c,Alib:10011336, AcpiIvrs:0 in agesawrapper_amdinitlate NvStorageSize=383, NvStorage=1001ccd4 SF: Detected MX25L3205D with page size 1000, total 400000 SF: Successfully erased 4096 bytes @ 0xffff7000 VolatileStorageSize=5a26, VolatileStorage=1001d057 SF: Detected MX25L3205D with page size 1000, total 400000 SF: Successfully erased 24576 bytes @ 0xffff0000 SF: Detected MX25L3205D with page size 1000, total 400000 SF: Successfully erased 4096 bytes @ 0xffff6000 BS: BS_POST_DEVICE times (us): entry 8449 run 3009 exit 3334098 BS: BS_OS_RESUME_CHECK times (us): entry 0 run 0 exit 0 Writing IRQ routing tables to 0xf0000...write_pirq_routing_table done. Adding CBMEM entry as no. 4 Writing IRQ routing tables to 0xbf130600...write_pirq_routing_table done. PIRQ table: 48 bytes. Wrote the mp table end at: 000f0410 - 000f061c Adding CBMEM entry as no. 5 Wrote the mp table end at: bf131610 - bf13181c MP table: 540 bytes. Adding CBMEM entry as no. 6 ACPI: Writing ACPI tables at bf132600... ACPI: * DSDT at bf1326c8 ACPI: * DSDT @ bf1326c8 Length 187c ACPI: * FACS at bf133f48 ACPI: * FADT at bf133f88 pm_base: 0x0800 ACPI: added table 1/32, length now 40 ACPI: * HPET at bf134080 ACPI: added table 2/32, length now 44 ACPI: * MADT at bf1340b8 ACPI: added table 3/32, length now 48 ACPI: added table 4/32, length now 52 ACPI: * IVRS at bf134300 AGESA IVRS table NULL. Skipping. ACPI: * SRAT at bf134300 AGESA SRAT table NULL. Skipping. ACPI: * SLIT at bf134300 AGESA SLIT table NULL. Skipping. ACPI: * AGESA ALIB SSDT at bf134300 ACPI: added table 5/32, length now 56 ACPI: * SSDT at bf134820 ACPI: added table 6/32, length now 60 ACPI: * SSDT for PState at bf135560 ACPI: * SSDT ACPI: added table 7/32, length now 64 ACPI: done. ACPI tables: 12197 bytes. Adding CBMEM entry as no. 7 smbios_write_tables: bf13da00 Root Device (ASUS F2A85-M) CPU_CLUSTER: 0 (AMD FAM15 Root Complex) APIC: 10 (AMD CPU Family 15h) DOMAIN: 0000 (AMD FAM15 Root Complex) PCI: 00:00.0 (AMD FAM15 Northbridge) PCI: 00:01.0 (AMD FAM15 Northbridge) PCI: 00:01.1 (AMD FAM15 Northbridge) PCI: 00:02.0 (AMD FAM15 Northbridge) PCI: 00:03.0 (AMD FAM15 Northbridge) PCI: 00:04.0 (AMD FAM15 Northbridge) PCI: 00:05.0 (AMD FAM15 Northbridge) PCI: 00:06.0 (AMD FAM15 Northbridge) PCI: 00:07.0 (AMD FAM15 Northbridge) PCI: 00:08.0 (AMD FAM15 Northbridge) PCI: 00:10.0 (ATI HUDSON) PCI: 00:10.1 (ATI HUDSON) PCI: 00:11.0 (ATI HUDSON) PCI: 00:12.0 (ATI HUDSON) PCI: 00:12.2 (ATI HUDSON) PCI: 00:13.0 (ATI HUDSON) PCI: 00:13.2 (ATI HUDSON) PCI: 00:14.0 (ATI HUDSON) I2C: 01:50 (unknown) I2C: 01:51 (unknown) PCI: 00:14.1 (ATI HUDSON) PCI: 00:14.2 (ATI HUDSON) PCI: 00:14.3 (ATI HUDSON) PNP: 002e.0 (ITE IT8728F Super I/O) PNP: 002e.1 (ITE IT8728F Super I/O) PNP: 002e.2 (ITE IT8728F Super I/O) PNP: 002e.3 (ITE IT8728F Super I/O) PNP: 002e.4 (ITE IT8728F Super I/O) PNP: 002e.5 (ITE IT8728F Super I/O) PNP: 002e.6 (ITE IT8728F Super I/O) PNP: 002e.7 (ITE IT8728F Super I/O) PNP: 002e.a (ITE IT8728F Super I/O) PCI: 00:14.4 (ATI HUDSON) PCI: 00:14.5 (ATI HUDSON) PCI: 00:14.6 (ATI HUDSON) PCI: 00:14.7 (ATI HUDSON) PCI: 00:15.0 (ATI HUDSON) PCI: 00:15.1 (ATI HUDSON) PCI: 00:15.2 (ATI HUDSON) PCI: 00:15.3 (ATI HUDSON) PCI: 00:18.0 (AMD FAM15 Northbridge) PCI: 00:18.1 (AMD FAM15 Northbridge) PCI: 00:18.2 (AMD FAM15 Northbridge) PCI: 00:18.3 (AMD FAM15 Northbridge) PCI: 00:18.4 (AMD FAM15 Northbridge) PCI: 00:18.5 (AMD FAM15 Northbridge) APIC: 11 (unknown) APIC: 12 (unknown) APIC: 13 (unknown) PCI: 03:00.0 (unknown) SMBIOS tables: 336 bytes. Adding CBMEM entry as no. 8 Adding CBMEM entry as no. 9 Adding CBMEM entry as no. 10 Writing table forward entry at 0x00000500 Wrote coreboot table at: 00000500, 0x10 bytes, checksum 4de0 Table forward entry ends at 0x00000528. ... aligned to 0x00001000 Writing coreboot table at 0xbffdf200 rom_table_end = 0xbffdf200 ... aligned to 0xbffe0000 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES 1. 0000000000001000-000000000009ffff: RAM 2. 00000000000c0000-00000000bf11ffff: RAM 3. 00000000bf120000-00000000bfffffff: CONFIGURATION TABLES 4. 00000000c0000000-00000000dfffffff: RESERVED 5. 00000000f8000000-00000000fbffffff: RESERVED 6. 0000000100000000-000000021effffff: RAM Wrote coreboot table at: bffdf200, 0x180 bytes, checksum ddcd coreboot table: 408 bytes. FREE SPACE 0. bffe7200 00018e00 GDT 1. bf120200 00000200 CONSOLE 2. bf120400 00010000 TIME STAMP 3. bf130400 00000200 IRQ TABLE 4. bf130600 00001000 SMP TABLE 5. bf131600 00001000 ACPI 6. bf132600 0000b400 SMBIOS 7. bf13da00 00000800 ACPI RESUME 8. bf13e200 00e00000 ACPISCRATCH 9. bff3e200 000a1000 COREBOOT 10. bffdf200 00008000 BS: BS_WRITE_TABLES times (us): entry 0 run 184018 exit 0 CBFS: located payload @ ffc107b8, 56957 bytes. Loading segment from rom address 0xffc107b8 code (compression=1) New segment dstaddr 0xe4abc memsize 0x1b544 srcaddr 0xffc107f0 filesize 0xde45 (cleaned up) New segment addr 0xe4abc size 0x1b544 offset 0xffc107f0 filesize 0xde45 Loading segment from rom address 0xffc107d4 Entry Point 0x000fd076 Bounce Buffer at bee11000, 3203168 bytes Loading Segment: addr: 0x00000000000e4abc memsz: 0x000000000001b544 filesz: 0x000000000000de45 lb: [0x0000000000200000, 0x0000000000387030) Post relocation: addr: 0x00000000000e4abc memsz: 0x000000000001b544 filesz: 0x000000000000de45 using LZMA [ 0x000e4abc, 00100000, 0x00100000) <- ffc107f0 dest 000e4abc, end 00100000, bouncebuffer bee11000 Loaded segments BS: BS_PAYLOAD_LOAD times (us): entry 0 run 44794 exit 0 Jumping to boot code at 000fd076 CPU0: stack: 002c6000 - 002c7000, lowest used address 002c65e0, stack used: 2592 bytes entry = 0x000fd076 lb_start = 0x00200000 lb_size = 0x00187030 buffer = 0xbee11000
-
Idwer Vollering