[LinuxBIOS] RE: Geode GX2

[Hamish Guthrie]

William,

I am currently porting the Geode code to V2 of LinuxBIOS ATM - please send
me the code off list and I will see if there is anything interesting in the
code you have which can go into the new stuff.

Hamish
> -----Original Message-----
> From: [e-mail]
> [mailto:[e-mail]]On Behalf Of Ronald G. Minnich
> Sent: Mittwoch, 27. April 2005 06:05
> To: William J Beksi
> Cc: Seb James; LinuxBIOS List
> Subject: Re: Geode GX2
>
> On Wed, 27 Apr 2005, William J Beksi wrote:
> > I have the source files (cpu setup, southbridge, northbridge)
>
> for the NSC
> > Geode GX1/GX2 orginally written by Christer Weinigel. I'm not
>
> sure, but it may
> > have been in the Linuxbios cvs a long time ago?
>
> it's been in v1 for years.
> > I have it working on an Informtech S7 board running an NSC
>
> Geode GX1 except
> > for the serial console.
> >
> > I believe AMD did not change the architecture after buying out
>
> the Geode from
> > NSC, so this should work for AMD Geodes.
>
> I guess hamish could use the code, he is the geode guy now.
>
> ron
> _______________________________________________
> Linuxbios mailing list
> [e-mail]
> http://www.clustermatic.org/mailman/listinfo/linuxbios
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.10.3 - Release Date: 25.04.2005