On the ASRock E350M1 I see slow data rates (<=10% of full rate) for incoming data transfers using the onboard gigabit NIC. There are kernel log messages like
r8169 0000:03:00.0: eth0: link up NOHZ: local_softirq_pending 08
repeated 10 times, followed by messages like
net_ratelimit: 75 callbacks suppressed
perh52@runbox.com wrote:
On the ASRock E350M1 I see slow data rates (<=10% of full rate) for incoming data transfers using the onboard gigabit NIC. There are kernel log messages like
r8169 0000:03:00.0: eth0: link up NOHZ: local_softirq_pending 08
repeated 10 times, followed by messages like
net_ratelimit: 75 callbacks suppressed
Start by comparing interrupt setup and interrupt rates with factory BIOS.
Then drill all the way down through the five-six groups of registers that are relevant for interrupt handling in the hardware and compare differences selectively based on ideas gathered from initial behavior comparison. Write patch. Receive thanks! :)
//Peter