Hello,
I just noticed new patches/drops into Coreboot (Cougar Canyon 2 board added). I did take git snapshot, and tried to see few things (what was added there). Talking about snapshot v4.0-4966 .
It seems that Emerald Lake 2 (EL2) and Cougar Canyon 2 (CC2) support two slightly different concepts. I switched from EL2 to CC2 (since I have EL2 and CC2 here in lab, but only tried EL2 board with CC2 FSP context).
I needed to have 10+ adaptation building for CC2, and in this process I noticed the following: [1] CC2 has several parameters hard coded (in <chipset>); [2] The new directory added: src/cpu/intel/fsp_model_206ax (there is already model_206ax); [3] This directory is out of sync (does not compile), so I added IVB microcode patches files (microcode_m2xxx_000000yy.h) and modified microcode_blob.h file; [4] Added vbios (latest 2170.dat); [5] Did not noticed Management Engine (new concept for all other non-INTEL embedded folks, which suddenly popped up from nowhere) addendum (path) for CC2, which EL2 does have; [6] Did not see/find descriptor.bin definition file and path definition (should be included somewhere); [7] Used standard seabios from git as payload.
And, yes, the whole Coreboot-v4.0-4966 does correctly compile with native gcc (NO cross-compiler) on my Fedora 18+ (Fedora 20) VM on my SNB DT:
coreboot.rom: 8192 kB, bootblocksize 864, romsize 8388608, offset 0x400000 alignment: 64 bytes
Name Offset Type Size cmos_layout.bin 0x400000 cmos_layout 1164 pci8086,0166.rom 0x4004c0 optionrom 65536 cpu_microcode_blob.bin 0x410500 microcode 32832 fallback/romstage 0x4185c0 stage 31082 fallback/coreboot_ram 0x41ff80 stage 75924 fallback/payload 0x432880 payload 55177 config 0x440080 raw 4426 pci8086,1502.rom 0x441200 raw 67584 (empty) 0x451a40 null 3335512 fsp.bin 0x77ffc0 (unknown) 393216 (empty) 0x7e0000 null 130072
Here is the question for thinking: both CC2 and EL2 choices should be unified, to reflect one steady procedure for INTEL FSP, right?
I sent this email not in negative connotation, just trying to understand how better to approach Coreboot configuration procedure. Since there are more than few paths to be selected and IDF tool to be used to generate descriptor.bin .
Looking forward to some suggestions (from wide auditorium) to what I wrote here.
Thank you, Zoran
Intel GmbH Dornacher Strasse 1 85622 Feldkirchen/Muenchen, Deutschland Sitz der Gesellschaft: Feldkirchen bei Muenchen Geschaeftsfuehrer: Christian Lamprechter, Hannes Schwaderer, Douglas Lusk Registergericht: Muenchen HRB 47456 Ust.-IdNr./VAT Registration No.: DE129385895 Citibank Frankfurt a.M. (BLZ 502 109 00) 600119052
-
Stojsavljevic, Zoran