Hi,
Here's the northdump and the lspci dump for the 810E northbridge. The only difference I see is in the PCISTS (PCI status) register setting (0x06-07h). Does this affect the ram initialization. In raminit.inc I'm setting the value of this register to 0x2080, but cannot see it being reflected in the northdump output. Could this cause problems in ram initialization? Also I have this small program which sets the value of the PCISTS register, however it modified the register value only the first time and never after that. Any pointers on what could be the reason?
**************************northdump output :******************************* 00: 86 80 24 71 06 00 80 00 03 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 24 71 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 28 53 0a 38 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: cc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: c6 78 18 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 eb fb 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 **************************northdump output :*******************************
**************************lspci output :************************************* 00:00.0 Host bridge: Intel Corporation 82810E GMCH [Graphics Memory Controller Hub] (rev 03) 00: 86 80 24 71 06 00 80 20 03 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 24 71 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 28 53 0a 38 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: cc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: c6 78 18 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 eb fb 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 **************************lspci output :*************************************
Regards, Shubhangi
I need a URL for the 810e, please send it and I'll look at this.
ron
Here's the datasheet for the 82810E GMCH www.intel.com/design/chipsets/datashts/29067602.pdf
-Shubhangi
-----Original Message----- From: ron minnich [mailto:rminnich@lanl.gov] Sent: Friday, May 09, 2003 8:46 PM To: Shubhangi Jadhav Cc: LinuxBIOS Subject: Re: 810E northbridge initialization problem
I need a URL for the 810e, please send it and I'll look at this.
ron