13 Dec
2007
13 Dec
'07
6:52 a.m.
Serengeti_Cheetah_fam10 mainboard. Marc
--
Marc Jones
Senior Firmware Engineer
(970) 226-9684 Office
mailto:Marc.Jones@amd.com
http://www.amd.com/embeddedprocessors
Initial AMD Serengeti_Cheetah_FAM10 platform for and Barcelona support.
Signed-off-by: Marc Jones marc.jones@amd.com
Reviewed-by: Jordan Crouse jordan.crouse@amd.com
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/Config.lb
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/Config.lb 2007-12-12 16:21:20.000000000 -0700
@@ -0,0 +1,424 @@
+#
+# This file is part of the LinuxBIOS project.
+#
+# Copyright (C) 2007 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+
+##
+## Compute the location and size of where this firmware image
+## (linuxBIOS plus bootloader) will live in the boot rom chip.
+##
+if USE_FAILOVER_IMAGE
+ default ROM_SECTION_SIZE = FAILOVER_SIZE
+ default ROM_SECTION_OFFSET = ( ROM_SIZE - FAILOVER_SIZE )
+else
+ if USE_FALLBACK_IMAGE
+ default ROM_SECTION_SIZE = FALLBACK_SIZE
+ default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE )
+ else
+ default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE )
+ default ROM_SECTION_OFFSET = 0
+ end
+end
+
+##
+## Compute the start location and size size of
+## The linuxBIOS bootloader.
+##
+default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+
+##
+## Compute where this copy of linuxBIOS will start in the boot rom
+##
+default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up linuxBIOS,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+default XIP_ROM_SIZE=65536
+#
+if USE_FAILOVER_IMAGE
+ default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
+else
+ if USE_FALLBACK_IMAGE
+ default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE + FAILOVER_SIZE)
+ else
+ default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
+ end
+end
+
+arch i386 end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+driver mainboard.o
+
+
+#needed by irq_tables and mptable and acpi_tables
+object get_bus_conf.o
+
+if HAVE_MP_TABLE
+ object mptable.o
+end
+
+if HAVE_PIRQ_TABLE
+ object irq_tables.o
+end
+
+if HAVE_ACPI_TABLES
+ object acpi_tables.o
+ object fadt.o
+ makerule dsdt.c
+ depends "$(MAINBOARD)/dx/dsdt_lb.dsl"
+ action "iasl -tc $(MAINBOARD)/dx/dsdt_lb.dsl"
+ action "mv dsdt_lb.hex dsdt.c"
+ end
+ object ./dsdt.o
+
+ #./ssdt.o is moved to northbridge/amd/amdk8/Config.lb
+
+ if ACPI_SSDTX_NUM
+ makerule ssdt2.c
+ depends "$(MAINBOARD)/dx/pci2.asl"
+ action "iasl -tc $(MAINBOARD)/dx/pci2.asl"
+ action "perl -pi -e 's/AmlCode/AmlCode_ssdt2/g' pci2.hex"
+ action "mv pci2.hex ssdt2.c"
+ end
+ object ./ssdt2.o
+ makerule ssdt3.c
+ depends "$(MAINBOARD)/dx/pci3.asl"
+ action "iasl -tc $(MAINBOARD)/dx/pci3.asl"
+ action "perl -pi -e 's/AmlCode/AmlCode_ssdt3/g' pci3.hex"
+ action "mv pci3.hex ssdt3.c"
+ end
+ object ./ssdt3.o
+ makerule ssdt4.c
+ depends "$(MAINBOARD)/dx/pci4.asl"
+ action "iasl -tc $(MAINBOARD)/dx/pci4.asl"
+ action "perl -pi -e 's/AmlCode/AmlCode_ssdt4/g' pci4.hex"
+ action "mv pci4.hex ssdt4.c"
+ end
+ object ./ssdt4.o
+ makerule ssdt5.c
+ depends "$(MAINBOARD)/dx/pci5.asl"
+ action "iasl -tc $(MAINBOARD)/dx/pci5.asl"
+ action "perl -pi -e 's/AmlCode/AmlCode_ssdt5/g' pci5.hex"
+ action "mv pci5.hex ssdt5.c"
+ end
+ object ./ssdt5.o
+ end
+end
+
+if USE_DCACHE_RAM
+ makedefine CACHE_AS_RAM_AUTO_C:=cache_as_ram_auto.c
+
+ if CONFIG_USE_INIT
+ # compile cache_as_ram.c to auto.o
+ makerule ./cache_as_ram_auto.o
+ depends "$(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) option_table.h"
+ action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
+ end
+
+ else
+ #compile cache_as_ram.c to auto.inc
+ makerule ./cache_as_ram_auto.inc
+ depends "$(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) option_table.h"
+ action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
+ action "perl -e 's/.rodata/.rom.data/g' -pi $@"
+ action "perl -e 's/.text/.section .rom.text/g' -pi $@"
+ end
+
+ end
+end
+
+if USE_FAILOVER_IMAGE
+else
+ if CONFIG_AP_CODE_IN_CAR
+ makerule ./apc_auto.o
+ depends "$(MAINBOARD)/apc_auto.c option_table.h"
+ action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/apc_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
+ end
+ ldscript /arch/i386/init/ldscript_apc.lb
+ end
+end
+
+##
+## Build our 16 bit and 32 bit linuxBIOS entry code
+##
+
+if HAVE_FAILOVER_BOOT
+ if USE_FAILOVER_IMAGE
+ mainboardinit cpu/x86/16bit/entry16.inc
+ ldscript /cpu/x86/16bit/entry16.lds
+ end
+else
+ if USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/entry16.inc
+ ldscript /cpu/x86/16bit/entry16.lds
+ end
+end
+
+mainboardinit cpu/x86/32bit/entry32.inc
+if USE_DCACHE_RAM
+ if CONFIG_USE_INIT
+ ldscript /cpu/x86/32bit/entry32.lds
+ end
+
+ if CONFIG_USE_INIT
+ ldscript /cpu/amd/car/cache_as_ram.lds
+ end
+end
+
+##
+## Build our reset vector (This is where linuxBIOS is entered)
+##
+if HAVE_FAILOVER_BOOT
+ if USE_FAILOVER_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
+ else
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
+ end
+else
+ if USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
+ else
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
+ end
+end
+
+
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+
+if USE_DCACHE_RAM
+ ##
+ ## Setup Cache-As-Ram
+ ##
+ mainboardinit cpu/amd/car/cache_as_ram.inc
+end
+
+###
+### This is the early phase of linuxBIOS startup
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+if HAVE_FAILOVER_BOOT
+ if USE_FAILOVER_IMAGE
+ if USE_DCACHE_RAM
+ ldscript /arch/i386/lib/failover_failover.lds
+ end
+ end
+else
+ if USE_FALLBACK_IMAGE
+ if USE_DCACHE_RAM
+ ldscript /arch/i386/lib/failover.lds
+ end
+ end
+end
+
+###
+### O.k. We aren't just an intermediary anymore!
+###
+
+##
+## Setup RAM
+##
+if USE_DCACHE_RAM
+
+ if CONFIG_USE_INIT
+ initobject cache_as_ram_auto.o
+ else
+ mainboardinit ./cache_as_ram_auto.inc
+ end
+
+end
+
+##
+## Include the secondary Configuration files
+##
+if CONFIG_CHIP_NAME
+ config chip.h
+end
+
+dir /southbridge/amd/amd8151
+
+# sample config for amd/serengeti_cheetah_fam10
+chip northbridge/amd/amdfam10/root_complex
+ device apic_cluster 0 on
+ chip cpu/amd/socket_F_1207 #L1 and DDR2
+ device apic 0 on end
+ end
+ end
+ device pci_domain 0 on
+ chip northbridge/amd/amdfam10
+ device pci 18.0 on # northbridge
+ # devices on link 0, link 0 == LDT 0
+ chip southbridge/amd/amd8132
+ # the on/off keyword is mandatory
+ device pci 0.0 on end
+ device pci 0.1 on end
+ device pci 1.0 on end
+ device pci 1.1 on end
+ end
+ chip southbridge/amd/amd8111
+ # this "device pci 0.0" is the parent the next one
+ # PCI bridge
+ device pci 0.0 on
+ device pci 0.0 on end
+ device pci 0.1 on end
+ device pci 0.2 off end
+ device pci 1.0 off end
+ end
+ device pci 1.0 on
+ chip superio/winbond/w83627hf
+ device pnp 2e.0 off # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.1 off # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.2 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.3 off # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ irq 0x72 = 12
+ end
+ device pnp 2e.6 off # CIR
+ io 0x60 = 0x100
+ end
+ device pnp 2e.7 off # GAME_MIDI_GIPO1
+ io 0x60 = 0x220
+ io 0x62 = 0x300
+ irq 0x70 = 9
+ end
+ device pnp 2e.8 off end # GPIO2
+ device pnp 2e.9 off end # GPIO3
+ device pnp 2e.a off end # ACPI
+ device pnp 2e.b on # HW Monitor
+ io 0x60 = 0x290
+ irq 0x70 = 5
+ end
+ end
+ end
+ device pci 1.1 on end
+ device pci 1.2 on end
+ device pci 1.3 on
+ chip drivers/i2c/i2cmux2 # pca9556 smbus mux
+ chip drivers/i2c/i2cmux2 # pca9556 smbus mux
+ device i2c 18 on #0 pca9516 1
+ chip drivers/generic/generic #dimm 0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic #dimm 0-0-1
+ device i2c 51 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-0
+ device i2c 52 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-1
+ device i2c 53 on end
+ end
+ end
+ device i2c 18 on #1 pca9516 2
+ chip drivers/generic/generic #dimm 1-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic #dimm 1-0-1
+ device i2c 51 on end
+ end
+ chip drivers/generic/generic #dimm 1-1-0
+ device i2c 52 on end
+ end
+ chip drivers/generic/generic #dimm 1-1-1
+ device i2c 53 on end
+ end
+ end
+ end
+ end
+ end # acpi
+ device pci 1.5 off end
+ device pci 1.6 off end
+ register "ide0_enable" = "1"
+ register "ide1_enable" = "1"
+ end
+ end # device pci 18.0
+
+ device pci 18.0 on end
+ device pci 18.0 on end
+ device pci 18.1 on end
+ device pci 18.2 on end
+ device pci 18.3 on end
+ device pci 18.4 on end
+# device pci 00.5 on end
+ end
+ end #pci_domain
+ #for node 32 to node 63
+# device pci_domain 0 on
+# chip northbridge/amd/amdfam10
+# device pci 00.0 on end# northbridge
+# device pci 00.0 on end
+# device pci 00.0 on end
+# device pci 00.0 on end
+# device pci 00.1 on end
+# device pci 00.2 on end
+# device pci 00.3 on end
+# device pci 00.4 on end
+# device pci 00.5 on end
+# end
+# end #pci_domain
+
+# chip drivers/generic/debug
+# device pnp 0.0 off end # chip name
+# device pnp 0.1 on end # pci_regs_all
+# device pnp 0.2 off end # mem
+# device pnp 0.3 off end # cpuid
+# device pnp 0.4 off end # smbus_regs_all
+# device pnp 0.5 off end # dual core msr
+# device pnp 0.6 off end # cache size
+# device pnp 0.7 off end # tsc
+# device pnp 0.8 off end # hard reset
+# device pnp 0.9 off end # mcp55
+# device pnp 0.a on end # GH ext table
+# end
+
+end
+
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb 2007-12-12 16:20:51.000000000 -0700
@@ -0,0 +1,357 @@
+#
+# This file is part of the LinuxBIOS project.
+#
+# Copyright (C) 2007 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses HAVE_ACPI_TABLES
+uses ACPI_SSDTX_NUM
+uses USE_FALLBACK_IMAGE
+uses USE_FAILOVER_IMAGE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_FAILOVER_BOOT
+uses HAVE_HARD_RESET
+uses IRQ_SLOT_COUNT
+uses HAVE_OPTION_TABLE
+uses CONFIG_MAX_CPUS
+uses CONFIG_MAX_PHYSICAL_CPUS
+uses CONFIG_LOGICAL_CPUS
+uses CONFIG_IOAPIC
+uses CONFIG_SMP
+uses FALLBACK_SIZE
+uses FAILOVER_SIZE
+uses ROM_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses CONFIG_ROM_PAYLOAD
+uses CONFIG_ROM_PAYLOAD_START
+uses PAYLOAD_SIZE
+uses _ROMBASE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses STACK_SIZE
+uses HEAP_SIZE
+uses USE_OPTION_TABLE
+uses LB_CKS_RANGE_START
+uses LB_CKS_RANGE_END
+uses LB_CKS_LOC
+uses MAINBOARD_PART_NUMBER
+uses MAINBOARD_VENDOR
+uses MAINBOARD
+uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+uses LINUXBIOS_EXTRA_VERSION
+uses _RAMBASE
+uses TTYS0_BAUD
+uses TTYS0_BASE
+uses TTYS0_LCS
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+uses CONFIG_CONSOLE_SERIAL8250
+uses HAVE_INIT_TIMER
+uses CONFIG_GDB_STUB
+uses CONFIG_GDB_STUB
+uses CROSS_COMPILE
+uses CC
+uses HOSTCC
+uses OBJCOPY
+uses CONFIG_CHIP_NAME
+uses CONFIG_CONSOLE_VGA
+uses CONFIG_PCI_ROM_RUN
+uses HW_MEM_HOLE_SIZEK
+uses HW_MEM_HOLE_SIZE_AUTO_INC
+
+uses HT_CHAIN_UNITID_BASE
+uses HT_CHAIN_END_UNITID_BASE
+uses SB_HT_CHAIN_ON_BUS0
+uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
+
+uses USE_DCACHE_RAM
+uses DCACHE_RAM_BASE
+uses DCACHE_RAM_SIZE
+uses DCACHE_RAM_GLOBAL_VAR_SIZE
+uses CONFIG_USE_INIT
+
+uses SERIAL_CPU_INIT
+
+uses ENABLE_APIC_EXT_ID
+uses APIC_ID_OFFSET
+uses LIFT_BSP_APIC_ID
+
+uses CONFIG_PCI_64BIT_PREF_MEM
+
+uses CONFIG_LB_MEM_TOPK
+
+uses PCI_BUS_SEGN_BITS
+
+uses CONFIG_AP_CODE_IN_CAR
+
+uses MEM_TRAIN_SEQ
+
+uses WAIT_BEFORE_CPUS_INIT
+
+uses CONFIG_AMDMCT
+
+uses CONFIG_USE_PRINTK_IN_CAR
+uses CAR_FAM10
+
+###
+### Build options
+###
+
+##
+## ROM_SIZE is the size of boot ROM that this board will use.
+##
+default ROM_SIZE=524288
+
+##
+##
+#FALLBACK_SIZE_SIZE is the amount of the ROM the complete fallback image will use
+##
+#default FALLBACK_SIZE=131072
+#default FALLBACK_SIZE=0x40000
+
+#FALLBACK: 512K - 4K
+default FALLBACK_SIZE=0x7f000
+#FAILOVER: 4k
+default FAILOVER_SIZE=0x01000
+
+#more 1M for pgtbl
+#if there is RAM on node0, we need to set it to 32M, otherwise can not access CAR on node0, and RAM on node1 at same time.
+default CONFIG_LB_MEM_TOPK=16384
+
+##
+## Build code for the fallback boot
+##
+default HAVE_FALLBACK_BOOT=1
+default HAVE_FAILOVER_BOOT=1
+
+##
+## Build code to reset the motherboard from linuxBIOS
+##
+default HAVE_HARD_RESET=1
+
+##
+## Build code to export a programmable irq routing table
+##
+default HAVE_PIRQ_TABLE=1
+default IRQ_SLOT_COUNT=11
+
+##
+## Build code to export an x86 MP table
+## Useful for specifying IRQ routing values
+##
+default HAVE_MP_TABLE=1
+
+## ACPI tables will be included
+default HAVE_ACPI_TABLES=1
+## extra SSDT num
+default ACPI_SSDTX_NUM=31
+
+##
+## Build code to export a CMOS option table
+##
+default HAVE_OPTION_TABLE=1
+
+##
+## Move the default LinuxBIOS cmos range off of AMD RTC registers
+##
+default LB_CKS_RANGE_START=49
+default LB_CKS_RANGE_END=122
+default LB_CKS_LOC=123
+
+##
+## Build code for SMP support
+## Only worry about 2 micro processors
+##
+default CONFIG_SMP=1
+default CONFIG_MAX_PHYSICAL_CPUS=2
+default CONFIG_MAX_CPUS=4 * CONFIG_MAX_PHYSICAL_CPUS
+default CONFIG_LOGICAL_CPUS=1
+
+#default SERIAL_CPU_INIT=0
+
+default ENABLE_APIC_EXT_ID=1
+default APIC_ID_OFFSET=0x00
+default LIFT_BSP_APIC_ID=1
+
+#CHIP_NAME ?
+default CONFIG_CHIP_NAME=1
+
+#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
+#2G
+#default HW_MEM_HOLE_SIZEK=0x200000
+#1G
+default HW_MEM_HOLE_SIZEK=0x100000
+#512M
+#default HW_MEM_HOLE_SIZEK=0x80000
+
+#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
+#default HW_MEM_HOLE_SIZE_AUTO_INC=1
+
+#VGA Console
+default CONFIG_CONSOLE_VGA=1
+default CONFIG_PCI_ROM_RUN=1
+
+#HT Unit ID offset, default is 1, the typical one
+default HT_CHAIN_UNITID_BASE=0xa
+
+#real SB Unit ID, default is 0x20, mean dont touch it at last
+default HT_CHAIN_END_UNITID_BASE=0x6
+
+#make the SB HT chain on bus 0, default is not (0)
+default SB_HT_CHAIN_ON_BUS0=2
+
+#only offset for SB chain?, default is yes(1)
+#default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
+
+#allow capable device use that above 4G
+#default CONFIG_PCI_64BIT_PREF_MEM=1
+
+#it only be 0, 1, 2, 3, 4 and default is 0
+#default PCI_BUS_SEGN_BITS=3
+
+##
+## enable CACHE_AS_RAM specifics
+##
+default USE_DCACHE_RAM=1
+default DCACHE_RAM_BASE=0xc4000
+default DCACHE_RAM_SIZE=0x0c000
+#default DCACHE_RAM_GLOBAL_VAR_SIZE=0x08000
+default DCACHE_RAM_GLOBAL_VAR_SIZE=0x04000
+default CONFIG_USE_INIT=0
+
+#default CONFIG_AP_CODE_IN_CAR=1
+default MEM_TRAIN_SEQ=2
+default WAIT_BEFORE_CPUS_INIT=0
+
+default CONFIG_AMDMCT = 1
+
+##
+## Build code to setup a generic IOAPIC
+##
+default CONFIG_IOAPIC=1
+
+##
+## Clean up the motherboard id strings
+##
+default MAINBOARD_PART_NUMBER="Cheetah Fam10"
+default MAINBOARD_VENDOR="AMD"
+default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
+default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80
+
+###
+### LinuxBIOS layout values
+###
+
+## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+default ROM_IMAGE_SIZE = 65536
+
+##
+## Use a small 8K stack
+##
+default STACK_SIZE=0x2000
+
+##
+## Use a small 768k heap
+##
+default HEAP_SIZE=0xc0000
+
+##
+## Only use the option table in a normal image
+##
+default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE )
+
+##
+## LinuxBIOS C code runs at this location in RAM
+##
+default _RAMBASE=0x00200000
+
+##
+## Load the payload from the ROM
+##
+default CONFIG_ROM_PAYLOAD = 1
+
+###
+### Defaults of options that you may want to override in the target config file
+###
+
+##
+## The default compiler
+##
+default CC="$(CROSS_COMPILE)gcc -m32"
+default HOSTCC="gcc"
+
+##
+## Disable the gdb stub by default
+##
+default CONFIG_GDB_STUB=0
+
+##
+## The Serial Console
+##
+
+default CONFIG_USE_PRINTK_IN_CAR=1
+
+# To Enable the Serial Console
+default CONFIG_CONSOLE_SERIAL8250=1
+
+## Select the serial console baud rate
+default TTYS0_BAUD=115200
+#default TTYS0_BAUD=57600
+#default TTYS0_BAUD=38400
+#default TTYS0_BAUD=19200
+#default TTYS0_BAUD=9600
+#default TTYS0_BAUD=4800
+#default TTYS0_BAUD=2400
+#default TTYS0_BAUD=1200
+
+# Select the serial console base port
+default TTYS0_BASE=0x3f8
+
+# Select the serial protocol
+# This defaults to 8 data bits, 1 stop bit, and no parity
+default TTYS0_LCS=0x3
+
+##
+### Select the linuxBIOS loglevel
+##
+## EMERG 1 system is unusable
+## ALERT 2 action must be taken immediately
+## CRIT 3 critical conditions
+## ERR 4 error conditions
+## WARNING 5 warning conditions
+## NOTICE 6 normal but significant condition
+## INFO 7 informational
+## DEBUG 8 debug-level messages
+## SPEW 9 Way too many details
+
+## Request this level of debugging output
+default DEFAULT_CONSOLE_LOGLEVEL=8
+## At a maximum only compile in this level of debugging
+default MAXIMUM_CONSOLE_LOGLEVEL=8
+
+##
+## Select power on after power fail setting
+default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
+
+### End Options.lb
+end
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/acpi_tables.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/acpi_tables.c 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,370 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <cpu/amd/amdfam10_sysconf.h>
+
+#include "mb_sysconf.h"
+
+#define DUMP_ACPI_TABLES 0
+
+#if DUMP_ACPI_TABLES == 1
+static void dump_mem(u32 start, u32 end)
+{
+
+ u32 i;
+ print_debug("dump_mem:");
+ for(i=start;i<end;i++) {
+ if((i & 0xf)==0) {
+ printk_debug("\n%08x:", i);
+ }
+ printk_debug(" %02x", (unsigned char)*((unsigned char *)i));
+ }
+ print_debug("\n");
+ }
+#endif
+
+extern u8 AmlCode[];
+extern u8 AmlCode_ssdt[];
+
+#if ACPI_SSDTX_NUM >= 1
+extern u8 AmlCode_ssdt2[];
+extern u8 AmlCode_ssdt3[];
+extern u8 AmlCode_ssdt4[];
+extern u8 AmlCode_ssdt5[];
+#endif
+
+#define IO_APIC_ADDR 0xfec00000UL
+
+unsigned long acpi_fill_mcfg(unsigned long current)
+{
+ /* Just a dummy */
+ return current;
+}
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ u32 gsi_base=0x18;
+
+ struct mb_sysconf_t *m;
+
+ m = sysconf.mb;
+
+ /* create all subtables for processors */
+ current = acpi_create_madt_lapics(current);
+
+ /* Write 8111 IOAPIC */
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8111,
+ IO_APIC_ADDR, 0);
+
+ /* Write all 8131 IOAPICs */
+ {
+ device_t dev;
+ struct resource *res;
+ dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN((sysconf.hcdn[0]&0xff), 1));
+ if (dev) {
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ if (res) {
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132_1,
+ res->base, gsi_base );
+ gsi_base+=7;
+
+ }
+ }
+ dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN((sysconf.hcdn[0] & 0xff)+1, 1));
+ if (dev) {
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ if (res) {
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132_2,
+ res->base, gsi_base );
+ gsi_base+=7;
+ }
+ }
+
+ int i;
+ int j = 0;
+
+ for(i=1; i< sysconf.hc_possible_num; i++) {
+ u32 d = 0;
+
+ if(!(sysconf.pci1234[i] & 0x1) ) continue;
+ // 8131 need to use +4
+ switch (sysconf.hcid[i]) {
+ case 1:
+ d = 7;
+ break;
+ case 3:
+ d = 4;
+ break;
+ }
+ switch (sysconf.hcid[i]) {
+ case 1:
+ case 3:
+ dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j], 1));
+ if (dev) {
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ if (res) {
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132a[j][0],
+ res->base, gsi_base );
+ gsi_base+=d;
+ }
+ }
+ dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j]+1, 1));
+ if (dev) {
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ if (res) {
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132a[j][1],
+ res->base, gsi_base );
+ gsi_base+=d;
+
+ }
+ }
+ break;
+ }
+ j++;
+ }
+ }
+
+ current += acpi_create_madt_irqoverride( (acpi_madt_irqoverride_t *) current, 0, 0, 2, 5 );
+ /* 0: mean bus 0--->ISA */
+ /* 0: PIC 0 */
+ /* 2: APIC 2 */
+ /* 5 mean: 0101 --> Edige-triggered, Active high*/
+
+
+ /* create all subtables for processors */
+ current = acpi_create_madt_lapic_nmis(current, 5, 1);
+ /* 1: LINT1 connect to NMI */
+
+ return current;
+}
+
+extern void get_bus_conf(void);
+extern void update_ssdt(void *ssdt);
+
+
+void update_ssdtx(void *ssdtx, int i)
+{
+ u8 *PCI;
+ u8 *HCIN;
+ u8 *UID;
+
+ PCI = ssdtx + 0x32;
+ HCIN = ssdtx + 0x39;
+ UID = ssdtx + 0x40;
+
+ if(i<7) {
+ *PCI = (u8) ('4' + i - 1);
+ }
+ else {
+ *PCI = (u8) ('A' + i - 1 - 6);
+ }
+ *HCIN = (u8) i;
+ *UID = (u8) (i+3);
+
+ /* FIXME: need to update the GSI id in the ssdtx too */
+
+}
+
+unsigned long write_acpi_tables(unsigned long start)
+{
+ unsigned long current;
+ acpi_rsdp_t *rsdp;
+ acpi_rsdt_t *rsdt;
+ acpi_hpet_t *hpet;
+ acpi_madt_t *madt;
+ acpi_srat_t *srat;
+ acpi_slit_t *slit;
+ acpi_fadt_t *fadt;
+ acpi_facs_t *facs;
+ acpi_header_t *dsdt;
+ acpi_header_t *ssdt;
+ acpi_header_t *ssdtx;
+ u8 *p;
+
+ int i;
+
+ get_bus_conf(); //it will get sblk, pci1234, hcdn, and sbdn
+
+ /* Align ACPI tables to 16 bytes */
+ start = ( start + 0x0f) & -0x10;
+ current = start;
+
+ printk_info("ACPI: Writing ACPI tables at %lx...\n", start);
+
+ /* We need at least an RSDP and an RSDT Table */
+ rsdp = (acpi_rsdp_t *) current;
+ current += sizeof(acpi_rsdp_t);
+ rsdt = (acpi_rsdt_t *) current;
+ current += sizeof(acpi_rsdt_t);
+
+ /* clear all table memory */
+ memset((void *)start, 0, current - start);
+
+ acpi_write_rsdp(rsdp, rsdt);
+ acpi_write_rsdt(rsdt);
+
+ /*
+ * We explicitly add these tables later on:
+ */
+ current = ( current + 0x07) & -0x08;
+ printk_debug("ACPI: * HPET at %lx\n", current);
+ hpet = (acpi_hpet_t *) current;
+ current += sizeof(acpi_hpet_t);
+ acpi_create_hpet(hpet);
+ acpi_add_table(rsdt,hpet);
+
+ /* If we want to use HPET Timers Linux wants an MADT */
+ current = ( current + 0x07) & -0x08;
+ printk_debug("ACPI: * MADT at %lx\n",current);
+ madt = (acpi_madt_t *) current;
+ acpi_create_madt(madt);
+ current+=madt->header.length;
+ acpi_add_table(rsdt,madt);
+
+ /* SRAT */
+ current = ( current + 0x07) & -0x08;
+ printk_debug("ACPI: * SRAT at %lx\n", current);
+ srat = (acpi_srat_t *) current;
+ acpi_create_srat(srat);
+ current+=srat->header.length;
+ acpi_add_table(rsdt,srat);
+
+ /* SLIT */
+ current = ( current + 0x07) & -0x08;
+ printk_debug("ACPI: * SLIT at %lx\n", current);
+ slit = (acpi_slit_t *) current;
+ acpi_create_slit(slit);
+ current+=slit->header.length;
+ acpi_add_table(rsdt,slit);
+
+ /* SSDT */
+ current = ( current + 0x0f) & -0x10;
+ printk_debug("ACPI: * SSDT at %lx\n", current);
+ ssdt = (acpi_header_t *)current;
+ current += ((acpi_header_t *)AmlCode_ssdt)->length;
+ memcpy((void *)ssdt, (void *)AmlCode_ssdt, ((acpi_header_t *)AmlCode_ssdt)->length);
+ //Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c
+ update_ssdt((void*)ssdt);
+ /* recalculate checksum */
+ ssdt->checksum = 0;
+ ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length);
+ acpi_add_table(rsdt,ssdt);
+
+ printk_debug("ACPI: * SSDT for PState at %lx\n", current);
+ current = acpi_add_ssdt_pstates(rsdt, current);
+
+#if ACPI_SSDTX_NUM >= 1
+
+ /* same htio, but different possition? We may have to copy,
+ change HCIN, and recalculate the checknum and add_table */
+
+ for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink
+ if((sysconf.pci1234[i] & 1) != 1 ) continue;
+ u8 c;
+ if(i<7) {
+ c = (u8) ('4' + i - 1);
+ }
+ else {
+ c = (u8) ('A' + i - 1 - 6);
+ }
+ current = ( current + 0x07) & -0x08;
+ printk_debug("ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt
+ ssdtx = (acpi_header_t *)current;
+ switch(sysconf.hcid[i]) {
+ case 1:
+ p = AmlCode_ssdt2;
+ break;
+ case 2:
+ p = AmlCode_ssdt3;
+ break;
+ case 3: //8131
+ p = AmlCode_ssdt4;
+ break;
+ default:
+ //HTX no io apic
+ p = AmlCode_ssdt5;
+ }
+ current += ((acpi_header_t *)p)->length;
+ memcpy((void *)ssdtx, (void *)p, ((acpi_header_t *)p)->length);
+ update_ssdtx((void *)ssdtx, i);
+ ssdtx->checksum = 0;
+ ssdtx->checksum = acpi_checksum((unsigned char *)ssdtx,ssdtx->length);
+ acpi_add_table(rsdt,ssdtx);
+ }
+#endif
+
+ /* DSDT */
+ current = ( current + 0x07) & -0x08;
+ printk_debug("ACPI: * DSDT at %lx\n", current);
+ dsdt = (acpi_header_t *)current; // it will used by fadt
+ current += ((acpi_header_t *)AmlCode)->length;
+ memcpy((void *)dsdt,(void *)AmlCode, \
+ ((acpi_header_t *)AmlCode)->length);
+ printk_debug("ACPI: * DSDT @ %08x Length %x\n",dsdt,dsdt->length);
+
+ /* FACS */ // it needs 64 bit alignment
+ current = ( current + 0x07) & -0x08;
+ printk_debug("ACPI: * FACS at %lx\n", current);
+ facs = (acpi_facs_t *) current; // it will be used by fadt
+ current += sizeof(acpi_facs_t);
+ acpi_create_facs(facs);
+
+ /* FDAT */
+ current = ( current + 0x07) & -0x08;
+ printk_debug("ACPI: * FADT at %lx\n", current);
+ fadt = (acpi_fadt_t *) current;
+ current += sizeof(acpi_fadt_t);
+
+ acpi_create_fadt(fadt,facs,dsdt);
+ acpi_add_table(rsdt,fadt);
+
+#if DUMP_ACPI_TABLES == 1
+ printk_debug("rsdp\n");
+ dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t));
+
+ printk_debug("rsdt\n");
+ dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t));
+
+ printk_debug("madt\n");
+ dump_mem(madt, ((void *)madt) + madt->header.length);
+
+ printk_debug("srat\n");
+ dump_mem(srat, ((void *)srat) + srat->header.length);
+
+ printk_debug("slit\n");
+ dump_mem(slit, ((void *)slit) + slit->header.length);
+
+ printk_debug("ssdt\n");
+ dump_mem(ssdt, ((void *)ssdt) + ssdt->length);
+
+ printk_debug("fadt\n");
+ dump_mem(fadt, ((void *)fadt) + fadt->header.length);
+#endif
+
+ printk_info("ACPI: done.\n");
+ return current;
+}
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/apc_auto.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/apc_auto.c 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,115 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#define ASSEMBLY 1
+#define __ROMCC__
+
+#define RAMINIT_SYSINFO 1
+#define CACHE_AS_RAM_ADDRESS_DEBUG 0
+
+#define SET_NB_CFG_54 1
+
+//used by raminit
+#define QRANK_DIMM_SUPPORT 1
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
+#include "pc80/serial.c"
+#if CONFIG_USE_INIT == 0
+ #include "lib/memcpy.c"
+#endif
+#include "arch/i386/lib/console.c"
+
+#include <cpu/amd/model_10xxx_rev.h>
+#include "northbridge/amd/amdfam10/raminit.h"
+#include "cpu/amd/model_fxx/apic_timer.c"
+
+#include "lib/delay.c"
+
+#if NODE_NUMS == 64
+ #define NODE_PCI(x,fn) ((x<32)?PCI_DEV(CBB,CDB+x,fn):PCI_DEV(CBB-1, CDB+x-32, fn))
+#else
+ #define NODE_PCI(x, fn) PCI_DEV(CBB,CDB+x,fn)
+#endif
+
+//#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/amd/amdfam10/reset_test.c"
+#include "northbridge/amd/amdfam10/debug.c"
+#include "southbridge/amd/amd8111/amd8111_early_ctrl.c"
+#include "northbridge/amd/amdfam10/amdfam10.h"
+
+#include "cpu/x86/mtrr.h"
+#include "cpu/amd/mtrr.h"
+#include "cpu/x86/tsc.h"
+
+#include "northbridge/amd/amdfam10/amdfam10_pci.c"
+#include "northbridge/amd/amdfam10/amdfam10_conf.c"
+#include "northbridge/amd/amdfam10/raminit_ddr2_dqs.c"
+
+#include "cpu/amd/quadcore/quadcore.c"
+
+void hardwaremain(int ret_addr)
+{
+ struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE
+ struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM
+
+ struct node_core_id id;
+
+ id = get_node_core_id_x();
+
+ printk_debug("CODE IN CACHE ON NODE: %02x\n");
+
+ train_ram(id.nodeid, sysinfo, sysinfox);
+
+ /* go back, but can not use stack any more, because we only keep
+ ret_addr and can not restore esp, and ebp */
+
+ __asm__ volatile (
+ "movl %0, %%edi\n\t"
+ "jmp *%%edi\n\t"
+ :: "a"(ret_addr)
+ );
+
+
+
+}
+struct eregs {
+ u32 eax, ecx, edx, ebx, esp, ebp, esi, edi;
+ u32 vector;
+ u32 error_code;
+ u32 eip;
+ u32 cs;
+ u32 eflags;
+};
+
+void x86_exception(struct eregs *info)
+{
+ do {
+ hlt();
+ } while(1);
+}
+
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/cache_as_ram_auto.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/cache_as_ram_auto.c 2007-12-12 16:54:54.000000000 -0700
@@ -0,0 +1,412 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+#define ASSEMBLY 1
+#define __ROMCC__
+
+#define SYSTEM_TYPE 0 /* SERVER */
+//#define SYSTEM_TYPE 1 /* DESKTOP */
+//#define SYSTEM_TYPE 2 /* MOBILE */
+
+
+#define RAMINIT_SYSINFO 1
+#define CACHE_AS_RAM_ADDRESS_DEBUG 1
+
+#define DEBUG_SMBUS 1
+
+#define SET_NB_CFG_54 1
+
+//used by raminit
+#define QRANK_DIMM_SUPPORT 1
+
+//used by incoherent_ht
+#define FAM10_SCAN_PCI_BUS 0
+#define FAM10_ALLOCATE_IO_RANGE 0
+
+//used by init_cpus and fidvid
+#define FAM10_SET_FIDVID 1
+#define FAM10_SET_FIDVID_CORE_RANGE 0
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
+
+/* FIXME: Use console.c post_code function */
+static void post_code(u8 value) {
+ outb(value, 0x80);
+}
+
+#if (USE_FAILOVER_IMAGE == 0)
+#include "arch/i386/lib/console.c"
+#include "pc80/serial.c"
+#include "ram/ramtest.c"
+#include <cpu/amd/model_10xxx_rev.h>
+#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
+#include "northbridge/amd/amdfam10/raminit.h"
+#include "northbridge/amd/amdfam10/amdfam10.h"
+#endif
+
+
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/amd/amdfam10/reset_test.c"
+#include "cpu/x86/bist.h"
+
+
+#if (USE_FAILOVER_IMAGE == 0)
+
+ #if CONFIG_USE_INIT == 0
+ #include "lib/memcpy.c"
+ #endif
+
+#include "northbridge/amd/amdfam10/debug.c"
+#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
+#include "cpu/amd/mtrr/amd_earlymtrr.c"
+#include "northbridge/amd/amdfam10/setup_resource_map.c"
+
+#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
+#include "southbridge/amd/amd8111/amd8111_early_ctrl.c"
+
+static void memreset_setup(void)
+{
+ //GPIO on amd8111 to enable MEMRST ????
+ outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); // REVC_MEMRST_EN=1
+ outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
+}
+
+
+static void memreset(int controllers, const struct mem_controller *ctrl)
+{
+}
+
+
+static inline void activate_spd_rom(const struct mem_controller *ctrl)
+{
+#define SMBUS_HUB 0x18
+ int ret,i;
+ u8 device = ctrl->spd_switch_addr;
+
+ printk_debug("switch i2c to : %02x for node %02x \n", device, ctrl->node_id);
+
+ /* the very first write always get COL_STS=1 and ABRT_STS=1, so try another time*/
+ i=2;
+ do {
+ ret = smbus_write_byte(SMBUS_HUB, 0x01, (1<<(device & 0x7)));
+ } while ((ret!=0) && (i-->0));
+ smbus_write_byte(SMBUS_HUB, 0x03, 0);
+}
+
+
+static inline int spd_read_byte(u32 device, u32 address)
+{
+ int result;
+ result = smbus_read_byte(device, address);
+ return result;
+}
+
+#include "northbridge/amd/amdfam10/amdfam10.h"
+#include "northbridge/amd/amdht/ht_wrapper.c"
+
+#include "include/cpu/x86/mem.h"
+#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c"
+#include "northbridge/amd/amdfam10/raminit_amdmct.c"
+#include "northbridge/amd/amdfam10/amdfam10_pci.c"
+
+#include "resourcemap.c"
+#include "cpu/amd/quadcore/quadcore.c"
+#include "cpu/amd/car/copy_and_run.c"
+#include "cpu/amd/car/post_cache_as_ram.c"
+#include "cpu/amd/model_10xxx/init_cpus.c"
+#include "cpu/amd/model_10xxx/fidvid.c"
+
+#endif /* (USE_FAILOVER_IMAGE == 0) */
+
+
+#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1))
+#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
+#include "northbridge/amd/amdfam10/early_ht.c"
+
+void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+ int last_boot_normal_flag = last_boot_normal();
+
+ /* Is this a cpu only reset? or Is this a secondary cpu? */
+ if ((cpu_init_detectedx) || (!boot_cpu())) {
+ if (last_boot_normal_flag) {
+ goto normal_image;
+ } else {
+ goto fallback_image;
+ }
+ }
+
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+ /* mov bsp to bus 0xff when > 8 nodes */
+ set_bsp_node_CHtExtNodeCfgEn();
+ enumerate_ht_chain();
+
+ /* Setup the rom access for 4M */
+ amd8111_enable_rom();
+
+ /* Is this a deliberate reset by the bios */
+ if (bios_reset_detected() && last_boot_normal_flag) {
+ goto normal_image;
+ }
+ /* This is the primary cpu how should I boot? */
+ else if (do_normal_boot()) {
+ goto normal_image;
+ }
+ else {
+ goto fallback_image;
+ }
+
+normal_image:
+ __asm__ volatile ("jmp __normal_image"
+ : /* outputs */
+ : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
+ );
+
+fallback_image:
+ #if HAVE_FAILOVER_BOOT==1
+ __asm__ volatile ("jmp __fallback_image"
+ : /* outputs */
+ : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
+ )
+ #endif
+ ;
+}
+#endif /* ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1)) */
+
+
+void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+//FIXME: I think that there is a hole here with the real_main() logic realmain is inside a USE_FAILOVER_IMAGE=0.
+#if HAVE_FAILOVER_BOOT==1
+ #if USE_FAILOVER_IMAGE==1
+ failover_process(bist, cpu_init_detectedx);
+ #else
+ real_main(bist, cpu_init_detectedx);
+ #endif
+#else
+ #if USE_FALLBACK_IMAGE == 1
+ failover_process(bist, cpu_init_detectedx);
+ #endif
+ real_main(bist, cpu_init_detectedx);
+#endif
+}
+
+
+#if (USE_FAILOVER_IMAGE==0)
+#include "spd_addr.h"
+#include "cpu/amd/microcode/microcode.c"
+#include "cpu/amd/model_10xxx/update_microcode.c"
+
+void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+
+ struct sys_info *sysinfo = (struct sys_info *)(DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE);
+ int needs_reset = 0;
+ u32 bsp_apicid = 0;
+ u32 val;
+ msr_t msr;
+
+ post_code(0x30);
+
+ if (bist == 0) {
+ bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); //mmconf is inited in init_cpus
+ /* All cores run this but the BSP(node0,core0) is the only core that returns. */
+ }
+
+ post_code(0x32);
+
+ w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
+ uart_init();
+ console_init();
+ printk_debug("\n");
+
+// dump_mem(DCACHE_RAM_BASE+DCACHE_RAM_SIZE-0x200, DCACHE_RAM_BASE+DCACHE_RAM_SIZE);
+
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
+
+ // Load MPB
+ val = cpuid_eax(1);
+ printk_debug("Family_Model: %08x \n", val);
+
+ /* FIXME: Need to make sure that APs are updated with the microcode and Errata */
+ update_microcode(val);
+ post_code(0x33);
+
+ /* FIXME: This errata code needs to move out of the mainboard but I am not sure where to yet.*/
+ /* FIXME: Check CPU revision to apply correct erratas */
+ /* Rev B errata */
+ /* Errata #169 - supercedes errata #131 */
+ msr = rdmsr(0xC001001F);
+ msr.hi |= 1 << (32 - 32);
+ wrmsr(0xC001101F, msr);
+
+ /* Errata #202 [DIS_PIGGY_BACK_SCRUB]=1 */
+ msr = rdmsr(0xC0011022);
+ msr.hi |= 1 << 24;
+ wrmsr(0xC0010022, msr);
+
+ /* 298 : FIXME: Fixed in B3/C1 */
+/* msr = rdmsr(0xC0010015);
+ msr.lo |= 1 << 3;
+ wrmsr(0xC0010015, msr);
+
+ msr = rdmsr(0xC0011023);
+ msr.lo |= 1 << 1;
+ wrmsr(0xC0010023, msr);
+*/
+ /* FIXME: Erratum #254 revB1 BU_CFG[21]=1 */
+
+
+ printk_debug("*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n");
+ setup_mb_resource_map();
+ post_code(0x34);
+
+// dump_pci_device(PCI_DEV(CBB, CDB, 0));
+
+ printk_debug("bsp_apicid = %02x \n", bsp_apicid);
+ printk_debug("cpu_init_detectedx = %08x \n", cpu_init_detectedx);
+
+ /* Setup sysinfo defaults */
+ set_sysinfo_in_ram(0);
+
+ post_code(0x35);
+
+ // FIXME: Add needs_reset check to HT links.
+ amd_ht_init(sysinfo);
+// print_pci_devices();
+// dump_pci_devices();
+
+ post_code(0x36);
+
+ finalize_node_setup(sysinfo);
+
+ /* wait for all the APs core0 started by finalize_node_setup. */
+ /* FIXME: A bunch of cores are going to start output to serial at once.
+ It would be nice to fixup prink spinlocks for ROM XIP mode.
+ I think it could be done by putting the spinlock flag in the cache
+ of the BSP located right after sysinfo.
+ */
+ wait_all_core0_started();
+
+ #if CONFIG_LOGICAL_CPUS==1
+ // Core0 on each node is configured. Now setup any additional cores.
+ printk_debug("start_other_cores()\n");
+ start_other_cores();
+ post_code(0x37);
+ wait_all_other_cores_started(bsp_apicid);
+ #endif
+
+ post_code(0x38);
+
+ #if FAM10_SET_FIDVID == 1
+ msr = rdmsr(0xc0010071);
+ printk_debug("Begin MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
+
+ /* FIXME: The sb fid change may survive the warm reset and only
+ need to be done once.*/
+ enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
+
+ post_code(0x39);
+
+ if (warm_reset_detect(0)) { // BSP is node 0
+ init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0
+ } else {
+ needs_reset |= (init_fidvid_bsp(bsp_apicid, sysinfo->nodes) << 31);
+ }
+
+ post_code(0x3A);
+
+ set_p0(); // Speed up the BSP!
+
+ // show final fid and vid
+ msr=rdmsr(0xc0010071);
+ printk_debug("End MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
+ #endif
+
+ // Reset for HT and FIDVID changes?
+ if (needs_reset) {
+ print_info("\tht reset -\n");
+ soft_reset_x(sysinfo->sbbusn, sysinfo->sbdn);
+ die("After soft_reset_x - shouldn't see this message!!!\n");
+ }
+
+ post_code(0x3B);
+
+ //enable cf9 for hard reset
+ print_debug("enable_cf9_x()\n");
+ enable_cf9_x(sysinfo->sbbusn, sysinfo->sbdn);
+ post_code(0x3C);
+
+ //It's the time to set ctrl in sysinfo now;
+ printk_debug("fill_mem_ctrl()\n");
+ fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
+ post_code(0x3D);
+
+
+ printk_debug("enable_smbus()\n");
+ enable_smbus();
+ post_code(0x3E);
+
+
+ memreset_setup();
+
+// die("Die Before MCT init.");
+
+ post_code(0x40);
+ printk_debug("raminit_amdmct()\n");
+ raminit_amdmct(sysinfo);
+ post_code(0x41);
+
+
+/*
+ dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200);
+ dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200);
+ dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200);
+ dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200);
+*/
+
+// ram_check(0x00200000, 0x00200000 + (640 * 1024));
+// ram_check(0x40200000, 0x40200000 + (640 * 1024));
+
+
+// die("After MCT init before CAR disabled.");
+
+ post_code(0x42);
+ printk_debug("\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
+ post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
+ post_code(0x43); // Should never see this post code.
+
+
+}
+
+
+#endif /* USE_FAILOVER_IMAGE==0 */
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/chip.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/chip.h 2007-12-12 16:37:32.000000000 -0700
@@ -0,0 +1,26 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+extern struct chip_operations mainboard_amd_serengeti_cheetah_fam10_ops;
+
+struct mainboard_amd_serengeti_cheetah_fam10_config {
+// int fixup_scsi;
+// int fixup_vga;
+};
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/cmos.layout
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/cmos.layout 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,98 @@
+entries
+
+#start-bit length config config-ID name
+#0 8 r 0 seconds
+#8 8 r 0 alarm_seconds
+#16 8 r 0 minutes
+#24 8 r 0 alarm_minutes
+#32 8 r 0 hours
+#40 8 r 0 alarm_hours
+#48 8 r 0 day_of_week
+#56 8 r 0 day_of_month
+#64 8 r 0 month
+#72 8 r 0 year
+#80 4 r 0 rate_select
+#84 3 r 0 REF_Clock
+#87 1 r 0 UIP
+#88 1 r 0 auto_switch_DST
+#89 1 r 0 24_hour_mode
+#90 1 r 0 binary_values_enable
+#91 1 r 0 square-wave_out_enable
+#92 1 r 0 update_finished_enable
+#93 1 r 0 alarm_interrupt_enable
+#94 1 r 0 periodic_interrupt_enable
+#95 1 r 0 disable_clock_updates
+#96 288 r 0 temporary_filler
+0 384 r 0 reserved_memory
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+386 1 e 1 ECC_memory
+388 4 r 0 reboot_bits
+392 3 e 5 baud_rate
+395 1 e 1 hw_scrubber
+396 1 e 1 interleave_chip_selects
+397 2 e 8 max_mem_clock
+399 1 e 2 quad_core
+400 1 e 1 power_on_after_fail
+412 4 e 6 debug_level
+416 4 e 7 boot_first
+420 4 e 7 boot_second
+424 4 e 7 boot_third
+428 4 h 0 boot_index
+432 8 h 0 boot_countdown
+440 4 e 9 slow_cpu
+444 1 e 1 nmi
+445 1 e 1 iommu
+728 256 h 0 user_data
+984 16 h 0 check_sum
+# Reserve the extended AMD configuration registers
+1000 24 r 0 reserved_memory
+
+
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+7 0 Network
+7 1 HDD
+7 2 Floppy
+7 8 Fallback_Network
+7 9 Fallback_HDD
+7 10 Fallback_Floppy
+#7 3 ROM
+8 0 400Mhz
+8 1 333Mhz
+8 2 266Mhz
+8 3 200Mhz
+9 0 off
+9 1 87.5%
+9 2 75.0%
+9 3 62.5%
+9 4 50.0%
+9 5 37.5%
+9 6 25.0%
+9 7 12.5%
+
+checksums
+
+checksum 392 983 984
+
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8111.asl
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8111.asl 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,180 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+//
+
+//AMD8111
+ Name (APIC, Package (0x04)
+ {
+ Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10},// 0x0004ffff : assusme 8131 is present
+ Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11},
+ Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12},
+ Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13}
+ })
+
+ Name (PICM, Package (0x04)
+ {
+ Package (0x04) { 0x0004FFFF, 0x00, _SB.PCI0.LNKA, 0x00},
+ Package (0x04) { 0x0004FFFF, 0x01, _SB.PCI0.LNKB, 0x00},
+ Package (0x04) { 0x0004FFFF, 0x02, _SB.PCI0.LNKC, 0x00},
+ Package (0x04) { 0x0004FFFF, 0x03, _SB.PCI0.LNKD, 0x00}
+ })
+
+ Name (DNCG, Ones)
+
+ Method (_PRT, 0, NotSerialized)
+ {
+ If (LEqual (^DNCG, Ones)) {
+ Store (DADD(_SB.PCI0.SBDN, 0x0001ffff), Local0)
+ // Update the Device Number according to SBDN
+ Store(Local0, Index (DeRefOf (Index (PICM, 0)), 0))
+ Store(Local0, Index (DeRefOf (Index (PICM, 1)), 0))
+ Store(Local0, Index (DeRefOf (Index (PICM, 2)), 0))
+ Store(Local0, Index (DeRefOf (Index (PICM, 3)), 0))
+ Store(Local0, Index (DeRefOf (Index (APIC, 0)), 0))
+ Store(Local0, Index (DeRefOf (Index (APIC, 1)), 0))
+ Store(Local0, Index (DeRefOf (Index (APIC, 2)), 0))
+ Store(Local0, Index (DeRefOf (Index (APIC, 3)), 0))
+ Store (0x00, ^DNCG)
+ }
+ If (LNot (PICF)) {Return (PICM)}
+ Else {Return (APIC)}
+ }
+
+ Device (SBC3)
+ {
+ // acpi smbus it should be 0x00040003 if 8131 present
+ Method (_ADR, 0, NotSerialized)
+ {
+ Return (DADD(_SB.PCI0.SBDN, 0x00010003))
+ }
+ OperationRegion (PIRQ, PCI_Config, 0x56, 0x02)
+ Field (PIRQ, ByteAcc, Lock, Preserve)
+ {
+ PIBA, 8,
+ PIDC, 8
+ }
+//
+// OperationRegion (TS3_, PCI_Config, 0xC4, 0x02)
+// Field (TS3_, DWordAcc, NoLock, Preserve)
+// {
+// PTS3, 16
+// }
+//
+ }
+
+ Device (HPET)
+ {
+ Name (HPT, 0x00)
+ Name (_HID, EisaId ("PNP0103"))
+ Name (_UID, 0x00)
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0F)
+ }
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUF0, ResourceTemplate ()
+ {
+ Memory32Fixed (ReadWrite, 0xFED00000, 0x00000400)
+ })
+ Return (BUF0)
+ }
+ }
+
+ Include ("amd8111_pic.asl")
+
+ Include ("amd8111_isa.asl")
+
+ Device (TP2P)
+ {
+ // 8111 P2P and it should 0x00030000 when 8131 present
+ Method (_ADR, 0, NotSerialized)
+ {
+ Return (DADD(_SB.PCI0.SBDN, 0x00000000))
+ }
+
+ Method (_PRW, 0, NotSerialized)
+ {
+ If (CondRefOf (_S3, Local0)) { Return (Package (0x02) { 0x08, 0x03 }) }
+ Else { Return (Package (0x02) { 0x08, 0x01 }) }
+ }
+
+ Device (USB0)
+ {
+ Name (_ADR, 0x00000000)
+ Method (_PRW, 0, NotSerialized)
+ {
+ If (CondRefOf (_S3, Local0)) { Return (Package (0x02) { 0x0F, 0x03 }) }
+ Else { Return (Package (0x02) { 0x0F, 0x01 }) }
+ }
+ }
+
+ Device (USB1)
+ {
+ Name (_ADR, 0x00000001)
+ Method (_PRW, 0, NotSerialized)
+ {
+ If (CondRefOf (_S3, Local0)) { Return (Package (0x02) { 0x0F, 0x03 }) }
+ Else { Return (Package (0x02) { 0x0F, 0x01 }) }
+ }
+ }
+
+ Name (APIC, Package (0x0C)
+ {
+ Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, //USB
+ Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 },
+ Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 },
+ Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 },
+
+ Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10 }, //Slot 4
+ Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11 },
+ Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12 },
+ Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13 },
+
+ Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x11 }, //Slot 3
+ Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x12 },
+ Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x13 },
+ Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x10 }
+ })
+
+ Name (PICM, Package (0x0C)
+ {
+ Package (0x04) { 0x0000FFFF, 0x00, _SB.PCI0.LNKA, 0x00 }, //USB
+ Package (0x04) { 0x0000FFFF, 0x01, _SB.PCI0.LNKB, 0x00 },
+ Package (0x04) { 0x0000FFFF, 0x02, _SB.PCI0.LNKC, 0x00 },
+ Package (0x04) { 0x0000FFFF, 0x03, _SB.PCI0.LNKD, 0x00 },
+
+ Package (0x04) { 0x0004FFFF, 0x00, _SB.PCI0.LNKA, 0x00 }, //Slot 4
+ Package (0x04) { 0x0004FFFF, 0x01, _SB.PCI0.LNKB, 0x00 },
+ Package (0x04) { 0x0004FFFF, 0x02, _SB.PCI0.LNKC, 0x00 },
+ Package (0x04) { 0x0004FFFF, 0x03, _SB.PCI0.LNKD, 0x00 },
+
+ Package (0x04) { 0x0005FFFF, 0x00, _SB.PCI0.LNKB, 0x00 }, //Slot 3
+ Package (0x04) { 0x0005FFFF, 0x01, _SB.PCI0.LNKC, 0x00 },
+ Package (0x04) { 0x0005FFFF, 0x02, _SB.PCI0.LNKD, 0x00 },
+ Package (0x04) { 0x0005FFFF, 0x03, _SB.PCI0.LNKA, 0x00 }
+ })
+
+ Method (_PRT, 0, NotSerialized)
+ {
+ If (LNot (PICF)) { Return (PICM) }
+ Else { Return (APIC) }
+ }
+ }
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8111_isa.asl
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8111_isa.asl 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,192 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+//
+
+//AMD8111 isa
+
+ Device (ISA)
+ {
+ // lpc 0x00040000
+ Method (_ADR, 0, NotSerialized)
+ {
+ Return (DADD(_SB.PCI0.SBDN, 0x00010000))
+ }
+
+ OperationRegion (PIRY, PCI_Config, 0x51, 0x02) // LPC Decode Registers
+ Field (PIRY, ByteAcc, NoLock, Preserve)
+ {
+ Z000, 2, // Parallel Port Range
+ , 1,
+ ECP, 1, // ECP Enable
+ FDC1, 1, // Floppy Drive Controller 1
+ FDC2, 1, // Floppy Drive Controller 2
+ Offset (0x01),
+ Z001, 3, // Serial Port A Range
+ SAEN, 1, // Serial Post A Enabled
+ Z002, 3, // Serial Port B Range
+ SBEN, 1 // Serial Post B Enabled
+ }
+
+ Device (PIC)
+ {
+ Name (_HID, EisaId ("PNP0000"))
+ Name (_CRS, ResourceTemplate ()
+ {
+ IO (Decode16, 0x0020, 0x0020, 0x01, 0x02)
+ IO (Decode16, 0x00A0, 0x00A0, 0x01, 0x02)
+ IRQ (Edge, ActiveHigh, Exclusive) {2}
+ })
+ }
+
+ Device (DMA1)
+ {
+ Name (_HID, EisaId ("PNP0200"))
+ Name (_CRS, ResourceTemplate ()
+ {
+ IO (Decode16, 0x0000, 0x0000, 0x01, 0x10)
+ IO (Decode16, 0x0080, 0x0080, 0x01, 0x10)
+ IO (Decode16, 0x00C0, 0x00C0, 0x01, 0x20)
+ DMA (Compatibility, NotBusMaster, Transfer16) {4}
+ })
+ }
+
+ Device (TMR)
+ {
+ Name (_HID, EisaId ("PNP0100"))
+ Name (_CRS, ResourceTemplate ()
+ {
+ IO (Decode16, 0x0040, 0x0040, 0x01, 0x04)
+ IRQ (Edge, ActiveHigh, Exclusive) {0}
+ })
+ }
+
+ Device (RTC)
+ {
+ Name (_HID, EisaId ("PNP0B00"))
+ Name (_CRS, ResourceTemplate ()
+ {
+ IO (Decode16, 0x0070, 0x0070, 0x01, 0x06)
+ IRQ (Edge, ActiveHigh, Exclusive) {8}
+ })
+ }
+
+ Device (SPKR)
+ {
+ Name (_HID, EisaId ("PNP0800"))
+ Name (_CRS, ResourceTemplate ()
+ {
+ IO (Decode16, 0x0061, 0x0061, 0x01, 0x01)
+ })
+ }
+
+ Device (COPR)
+ {
+ Name (_HID, EisaId ("PNP0C04"))
+ Name (_CRS, ResourceTemplate ()
+ {
+ IO (Decode16, 0x00F0, 0x00F0, 0x01, 0x10)
+ IRQ (Edge, ActiveHigh, Exclusive) {13}
+ })
+ }
+
+ Device (SYSR)
+ {
+ Name (_HID, EisaId ("PNP0C02"))
+ Name (_UID, 0x00)
+ Name (SYR1, ResourceTemplate ()
+ {
+ IO (Decode16, 0x04D0, 0x04D0, 0x01, 0x02) //report Thor NVRAM
+ IO (Decode16, 0x1100, 0x117F, 0x01, 0x80) //report Thor NVRAM
+ IO (Decode16, 0x1180, 0x11FF, 0x01, 0x80)
+ IO (Decode16, 0x0010, 0x0010, 0x01, 0x10)
+ IO (Decode16, 0x0022, 0x0022, 0x01, 0x1E)
+ IO (Decode16, 0x0044, 0x0044, 0x01, 0x1C)
+ IO (Decode16, 0x0062, 0x0062, 0x01, 0x02)
+ IO (Decode16, 0x0065, 0x0065, 0x01, 0x0B)
+ IO (Decode16, 0x0076, 0x0076, 0x01, 0x0A)
+ IO (Decode16, 0x0090, 0x0090, 0x01, 0x10)
+ IO (Decode16, 0x00A2, 0x00A2, 0x01, 0x1E)
+ IO (Decode16, 0x00E0, 0x00E0, 0x01, 0x10)
+ IO (Decode16, 0x0B78, 0x0B78, 0x01, 0x04) // Added this to remove ACPI Unrepoted IO Error
+ IO (Decode16, 0x0190, 0x0190, 0x01, 0x04) // Added this to remove ACPI Unrepoted IO Error
+ })
+ Method (_CRS, 0, NotSerialized)
+ {
+ Return (SYR1)
+ }
+ }
+
+ Device (MEM)
+ {
+ Name (_HID, EisaId ("PNP0C02"))
+ Name (_UID, 0x01)
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUF0, ResourceTemplate ()
+ {
+ Memory32Fixed (ReadWrite, 0x000E0000, 0x00020000) // BIOS E4000-FFFFF
+ Memory32Fixed (ReadWrite, 0x000C0000, 0x00000000) // video BIOS c0000-c8404
+ Memory32Fixed (ReadWrite, 0xFEC00000, 0x00001000) // I/O APIC
+ Memory32Fixed (ReadWrite, 0xFFC00000, 0x00380000) // LPC forwarded, 4 MB w/ROM
+ Memory32Fixed (ReadWrite, 0xFEE00000, 0x00001000) // Local APIC
+ Memory32Fixed (ReadWrite, 0xFFF80000, 0x00080000) // Overlay BIOS
+ Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS
+ Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS
+ Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS
+ Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS
+ })
+ // Read the Video Memory length
+ CreateDWordField (BUF0, 0x14, CLEN)
+ CreateDWordField (BUF0, 0x10, CBAS)
+
+ ShiftLeft (VGA1, 0x09, Local0)
+ Store (Local0, CLEN)
+
+ Return (BUF0)
+ }
+ }
+
+ Device (PS2M)
+ {
+ Name (_HID, EisaId ("PNP0F13"))
+ Name (_CRS, ResourceTemplate ()
+ {
+ IRQNoFlags () {12}
+ })
+ Method (_STA, 0, NotSerialized)
+ {
+ And (FLG0, 0x04, Local0)
+ If (LEqual (Local0, 0x04)) { Return (0x0F) }
+ Else { Return (0x00) }
+ }
+ }
+
+ Device (PS2K)
+ {
+ Name (_HID, EisaId ("PNP0303"))
+ Name (_CRS, ResourceTemplate ()
+ {
+ IO (Decode16, 0x0060, 0x0060, 0x01, 0x01)
+ IO (Decode16, 0x0064, 0x0064, 0x01, 0x01)
+ IRQNoFlags () {1}
+ })
+ }
+ Include ("superio.asl")
+
+ }
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8111_pic.asl
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8111_pic.asl 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,376 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+//
+
+//AMD8111 pic LNKA B C D
+
+ Device (LNKA)
+ {
+ Name (_HID, EisaId ("PNP0C0F"))
+ Name (_UID, 0x01)
+ Method (_STA, 0, NotSerialized)
+ {
+ And (_SB.PCI0.SBC3.PIBA, 0x0F, Local0)
+ If (LEqual (Local0, 0x00)) { Return (0x09) } //Disabled
+ Else { Return (0x0B) } //Enabled
+ }
+
+ Method (_PRS, 0, NotSerialized)
+ {
+ Name (BUFA, ResourceTemplate ()
+ {
+ IRQ (Level, ActiveLow, Shared) {3,5,10,11}
+ })
+ Return (BUFA)
+ }
+
+ Method (_DIS, 0, NotSerialized)
+ {
+ Store (0x01, Local3)
+ And (_SB.PCI0.SBC3.PIBA, 0x0F, Local1)
+ Store (Local1, Local2)
+ If (LGreater (Local1, 0x07))
+ {
+ Subtract (Local1, 0x08, Local1)
+ }
+
+ ShiftLeft (Local3, Local1, Local3)
+ Not (Local3, Local3)
+ And (_SB.PCI0.SBC3.PIBA, 0xF0, _SB.PCI0.SBC3.PIBA)
+ }
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUFA, ResourceTemplate ()
+ {
+ IRQ (Level, ActiveLow, Shared) {}
+ })
+ CreateByteField (BUFA, 0x01, IRA1)
+ CreateByteField (BUFA, 0x02, IRA2)
+ Store (0x00, Local3)
+ Store (0x00, Local4)
+ And (_SB.PCI0.SBC3.PIBA, 0x0F, Local1)
+ If (LNot (LEqual (Local1, 0x00)))
+ { // Routing enable
+ If (LGreater (Local1, 0x07))
+ {
+ Subtract (Local1, 0x08, Local2)
+ ShiftLeft (One, Local2, Local4)
+ }
+ Else
+ {
+ If (LGreater (Local1, 0x00))
+ {
+ ShiftLeft (One, Local1, Local3)
+ }
+ }
+
+ Store (Local3, IRA1)
+ Store (Local4, IRA2)
+ }
+
+ Return (BUFA)
+ }
+
+ Method (_SRS, 1, NotSerialized)
+ {
+ CreateByteField (Arg0, 0x01, IRA1)
+ CreateByteField (Arg0, 0x02, IRA2)
+ ShiftLeft (IRA2, 0x08, Local0)
+ Or (Local0, IRA1, Local0)
+ Store (0x00, Local1)
+ ShiftRight (Local0, 0x01, Local0)
+ While (LGreater (Local0, 0x00))
+ {
+ Increment (Local1)
+ ShiftRight (Local0, 0x01, Local0)
+ }
+
+ And (_SB.PCI0.SBC3.PIBA, 0xF0, _SB.PCI0.SBC3.PIBA)
+ Or (_SB.PCI0.SBC3.PIBA, Local1, _SB.PCI0.SBC3.PIBA)
+ }
+ }
+
+ Device (LNKB)
+ {
+ Name (_HID, EisaId ("PNP0C0F"))
+ Name (_UID, 0x02)
+ Method (_STA, 0, NotSerialized)
+ {
+ And (_SB.PCI0.SBC3.PIBA, 0xF0, Local0)
+ If (LEqual (Local0, 0x00)) { Return (0x09) }
+ Else { Return (0x0B) }
+ }
+
+ Method (_PRS, 0, NotSerialized)
+ {
+ Name (BUFB, ResourceTemplate ()
+ {
+ IRQ (Level, ActiveLow, Shared) {3,5,10,11}
+ })
+ Return (BUFB)
+ }
+
+ Method (_DIS, 0, NotSerialized)
+ {
+ Store (0x01, Local3)
+ And (_SB.PCI0.SBC3.PIBA, 0xF0, Local1)
+ ShiftRight (Local1, 0x04, Local1)
+ Store (Local1, Local2)
+ If (LGreater (Local1, 0x07))
+ {
+ Subtract (Local1, 0x08, Local1)
+ }
+
+ ShiftLeft (Local3, Local1, Local3)
+ Not (Local3, Local3)
+ And (_SB.PCI0.SBC3.PIBA, 0x0F, _SB.PCI0.SBC3.PIBA)
+ }
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUFB, ResourceTemplate ()
+ {
+ IRQ (Level, ActiveLow, Shared) {}
+ })
+ CreateByteField (BUFB, 0x01, IRB1)
+ CreateByteField (BUFB, 0x02, IRB2)
+ Store (0x00, Local3)
+ Store (0x00, Local4)
+ And (_SB.PCI0.SBC3.PIBA, 0xF0, Local1)
+ ShiftRight (Local1, 0x04, Local1)
+ If (LNot (LEqual (Local1, 0x00)))
+ {
+ If (LGreater (Local1, 0x07))
+ {
+ Subtract (Local1, 0x08, Local2)
+ ShiftLeft (One, Local2, Local4)
+ }
+ Else
+ {
+ If (LGreater (Local1, 0x00))
+ {
+ ShiftLeft (One, Local1, Local3)
+ }
+ }
+
+ Store (Local3, IRB1)
+ Store (Local4, IRB2)
+ }
+
+ Return (BUFB)
+ }
+
+ Method (_SRS, 1, NotSerialized)
+ {
+ CreateByteField (Arg0, 0x01, IRB1)
+ CreateByteField (Arg0, 0x02, IRB2)
+ ShiftLeft (IRB2, 0x08, Local0)
+ Or (Local0, IRB1, Local0)
+ Store (0x00, Local1)
+ ShiftRight (Local0, 0x01, Local0)
+ While (LGreater (Local0, 0x00))
+ {
+ Increment (Local1)
+ ShiftRight (Local0, 0x01, Local0)
+ }
+
+ And (_SB.PCI0.SBC3.PIBA, 0x0F, _SB.PCI0.SBC3.PIBA)
+ ShiftLeft (Local1, 0x04, Local1)
+ Or (_SB.PCI0.SBC3.PIBA, Local1, _SB.PCI0.SBC3.PIBA)
+ }
+ }
+
+ Device (LNKC)
+ {
+ Name (_HID, EisaId ("PNP0C0F"))
+ Name (_UID, 0x03)
+ Method (_STA, 0, NotSerialized)
+ {
+ And (_SB.PCI0.SBC3.PIDC, 0x0F, Local0)
+ If (LEqual (Local0, 0x00)) { Return (0x09) }
+ Else { Return (0x0B) }
+ }
+
+ Method (_PRS, 0, NotSerialized)
+ {
+ Name (BUFA, ResourceTemplate ()
+ {
+ IRQ (Level, ActiveLow, Shared) {3,5,10,11}
+ })
+ Return (BUFA)
+ }
+
+ Method (_DIS, 0, NotSerialized)
+ {
+ Store (0x01, Local3)
+ And (_SB.PCI0.SBC3.PIDC, 0x0F, Local1)
+ Store (Local1, Local2)
+ If (LGreater (Local1, 0x07))
+ {
+ Subtract (Local1, 0x08, Local1)
+ }
+
+ ShiftLeft (Local3, Local1, Local3)
+ Not (Local3, Local3)
+ And (_SB.PCI0.SBC3.PIDC, 0xF0, _SB.PCI0.SBC3.PIDC)
+ }
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUFA, ResourceTemplate ()
+ {
+ IRQ (Level, ActiveLow, Shared) {}
+ })
+ CreateByteField (BUFA, 0x01, IRA1)
+ CreateByteField (BUFA, 0x02, IRA2)
+ Store (0x00, Local3)
+ Store (0x00, Local4)
+ And (_SB.PCI0.SBC3.PIDC, 0x0F, Local1)
+ If (LNot (LEqual (Local1, 0x00)))
+ {
+ If (LGreater (Local1, 0x07))
+ {
+ Subtract (Local1, 0x08, Local2)
+ ShiftLeft (One, Local2, Local4)
+ }
+ Else
+ {
+ If (LGreater (Local1, 0x00))
+ {
+ ShiftLeft (One, Local1, Local3)
+ }
+ }
+
+ Store (Local3, IRA1)
+ Store (Local4, IRA2)
+ }
+
+ Return (BUFA)
+ }
+
+ Method (_SRS, 1, NotSerialized)
+ {
+ CreateByteField (Arg0, 0x01, IRA1)
+ CreateByteField (Arg0, 0x02, IRA2)
+ ShiftLeft (IRA2, 0x08, Local0)
+ Or (Local0, IRA1, Local0)
+ Store (0x00, Local1)
+ ShiftRight (Local0, 0x01, Local0)
+ While (LGreater (Local0, 0x00))
+ {
+ Increment (Local1)
+ ShiftRight (Local0, 0x01, Local0)
+ }
+
+ And (_SB.PCI0.SBC3.PIDC, 0xF0, _SB.PCI0.SBC3.PIDC)
+ Or (_SB.PCI0.SBC3.PIDC, Local1, _SB.PCI0.SBC3.PIDC)
+ }
+ }
+
+ Device (LNKD)
+ {
+ Name (_HID, EisaId ("PNP0C0F"))
+ Name (_UID, 0x04)
+ Method (_STA, 0, NotSerialized)
+ {
+ And (_SB.PCI0.SBC3.PIDC, 0xF0, Local0)
+ If (LEqual (Local0, 0x00)) { Return (0x09) }
+ Else { Return (0x0B) }
+ }
+
+ Method (_PRS, 0, NotSerialized)
+ {
+ Name (BUFB, ResourceTemplate ()
+ {
+ IRQ (Level, ActiveLow, Shared) {3,5,10,11}
+ })
+ Return (BUFB)
+ }
+
+ Method (_DIS, 0, NotSerialized)
+ {
+ Store (0x01, Local3)
+ And (_SB.PCI0.SBC3.PIDC, 0xF0, Local1)
+ ShiftRight (Local1, 0x04, Local1)
+ Store (Local1, Local2)
+ If (LGreater (Local1, 0x07))
+ {
+ Subtract (Local1, 0x08, Local1)
+ }
+
+ ShiftLeft (Local3, Local1, Local3)
+ Not (Local3, Local3)
+ And (_SB.PCI0.SBC3.PIDC, 0x0F, _SB.PCI0.SBC3.PIDC)
+ }
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUFB, ResourceTemplate ()
+ {
+ IRQ (Level, ActiveLow, Shared) {}
+ })
+ CreateByteField (BUFB, 0x01, IRB1)
+ CreateByteField (BUFB, 0x02, IRB2)
+ Store (0x00, Local3)
+ Store (0x00, Local4)
+ And (_SB.PCI0.SBC3.PIDC, 0xF0, Local1)
+ ShiftRight (Local1, 0x04, Local1)
+ If (LNot (LEqual (Local1, 0x00)))
+ {
+ If (LGreater (Local1, 0x07))
+ {
+ Subtract (Local1, 0x08, Local2)
+ ShiftLeft (One, Local2, Local4)
+ }
+ Else
+ {
+ If (LGreater (Local1, 0x00))
+ {
+ ShiftLeft (One, Local1, Local3)
+ }
+ }
+
+ Store (Local3, IRB1)
+ Store (Local4, IRB2)
+ }
+
+ Return (BUFB)
+ }
+
+ Method (_SRS, 1, NotSerialized)
+ {
+ CreateByteField (Arg0, 0x01, IRB1)
+ CreateByteField (Arg0, 0x02, IRB2)
+ ShiftLeft (IRB2, 0x08, Local0)
+ Or (Local0, IRB1, Local0)
+ Store (0x00, Local1)
+ ShiftRight (Local0, 0x01, Local0)
+ While (LGreater (Local0, 0x00))
+ {
+ Increment (Local1)
+ ShiftRight (Local0, 0x01, Local0)
+ }
+
+ And (_SB.PCI0.SBC3.PIDC, 0x0F, _SB.PCI0.SBC3.PIDC)
+ ShiftLeft (Local1, 0x04, Local1)
+ Or (_SB.PCI0.SBC3.PIDC, Local1, _SB.PCI0.SBC3.PIDC)
+ }
+ }
+
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8131_2.asl
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8131_2.asl 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,126 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+//
+ Device (PG0A)
+ {
+ // 8132 pcix bridge
+ Method (_ADR, 0, NotSerialized)
+ {
+ Return (DADD(GHCD(HCIN, 0), 0x00000000))
+ }
+
+ Method (_PRW, 0, NotSerialized)
+ {
+ If (CondRefOf (_S3, Local0)) { Return (Package (0x02) { 0x29, 0x03 }) }
+ Else { Return (Package (0x02) { 0x29, 0x01 }) }
+ }
+
+ Name (APIC, Package (0x04)
+ {
+ // Slot A - PIRQ BCDA
+ Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x0018 }, //Slot 2
+ Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x0019 },
+ Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x001A },
+ Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x001B },
+ })
+ Name (PICM, Package (0x04)
+ {
+ Package (0x04) { 0x0001FFFF, 0x00, _SB.PCI0.LNKA, 0x00 },//Slot 2
+ Package (0x04) { 0x0001FFFF, 0x01, _SB.PCI0.LNKB, 0x00 },
+ Package (0x04) { 0x0001FFFF, 0x02, _SB.PCI0.LNKC, 0x00 },
+ Package (0x04) { 0x0001FFFF, 0x03, _SB.PCI0.LNKD, 0x00 },
+ })
+
+ Name (DNCG, Ones)
+
+ Method (_PRT, 0, NotSerialized)
+ {
+ If (LEqual (^DNCG, Ones))
+ {
+ Multiply (HCIN, 0x0008, Local2) // GSI for 8132 is 4 so we get 8
+ Store (0x00, Local1)
+ While (LLess (Local1, 0x04))
+ {
+ // Update the GSI according to HCIN
+ Store(DeRefOf(Index (DeRefOf (Index (APIC, Local1)), 3)), Local0)
+ Add(Local2, Local0, Local0)
+ Store(Local0, Index (DeRefOf (Index (APIC, Local1)), 3))
+ Increment (Local1)
+ }
+ Store (0x00, ^DNCG)
+ }
+ If (LNot (PICF)) { Return (PICM) }
+ Else { Return (APIC) }
+ }
+ }
+
+ Device (PG0B)
+ {
+ // 8132 pcix bridge 2
+ Method (_ADR, 0, NotSerialized)
+ {
+ Return (DADD(GHCD(HCIN, 0), 0x00010000))
+ }
+
+ Method (_PRW, 0, NotSerialized)
+ {
+ If (CondRefOf (_S3, Local0)) { Return (Package (0x02) { 0x22, 0x03 }) }
+ Else { Return (Package (0x02) { 0x22, 0x01 }) }
+ }
+
+ Name (APIC, Package (0x04)
+ {
+ // Slot A - PIRQ ABCD
+ Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x001F },// Slot 1
+ Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x0020 },
+ Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x0021 },
+ Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x0022 }
+ })
+ Name (PICM, Package (0x04)
+ {
+ Package (0x04) { 0x0001FFFF, 0x00, _SB.PCI0.LNKA, 0x00 },//Slot 1
+ Package (0x04) { 0x0001FFFF, 0x01, _SB.PCI0.LNKB, 0x00 },
+ Package (0x04) { 0x0001FFFF, 0x02, _SB.PCI0.LNKC, 0x00 },
+ Package (0x04) { 0x0001FFFF, 0x03, _SB.PCI0.LNKD, 0x00 }
+ })
+
+ Name (DNCG, Ones)
+
+ Method (_PRT, 0, NotSerialized)
+ {
+ If (LEqual (^DNCG, Ones))
+ {
+ Multiply (HCIN, 0x0008, Local2) // GSI for 8132 is 4 so we get 8
+ Store (0x00, Local1)
+ While (LLess (Local1, 0x04))
+ {
+ // Update the GSI according to HCIN
+ Store(DeRefOf(Index (DeRefOf (Index (APIC, Local1)), 3)), Local0)
+ Add(Local2, Local0, Local0)
+ Store(Local0, Index (DeRefOf (Index (APIC, Local1)), 3))
+ Increment (Local1)
+ }
+
+ Store (0x00, ^DNCG)
+
+ }
+
+ If (LNot (PICF)) { Return (PICM) }
+ Else { Return (APIC) }
+ }
+ }
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8132.asl
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8132.asl 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,134 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+//
+
+ Device (PG0A)
+ {
+ // 8132 pcix bridge
+ Method (_ADR, 0, NotSerialized)
+ {
+ Return (DADD(GHCD(HCIN, 0), 0x00000000))
+ }
+
+ Method (_PRW, 0, NotSerialized)
+ {
+ If (CondRefOf (_S3, Local0)) { Return (Package (0x02) { 0x29, 0x03 }) }
+ Else { Return (Package (0x02) { 0x29, 0x01 }) }
+ }
+
+ Name (APIC, Package (0x14)
+ {
+ // Slot A - PIRQ BCDA
+ Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x19 }, //Slot 2
+ Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x1A },
+ Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x1B },
+ Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x18 },
+
+ //Cypress Slot A - PIRQ BCDA
+ Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x19 }, //?
+ Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x1A },
+ Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x1B },
+ Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x18 },
+
+ //Cypress Slot B - PIRQ CDAB
+ Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x1A }, //?
+ Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x1B },
+ Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x18 },
+ Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x19 },
+
+ //Cypress Slot C - PIRQ DABC
+ Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x1B }, //?
+ Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x18 },
+ Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x19 },
+ Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x1A },
+
+ //Cypress Slot D - PIRQ ABCD
+ Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x18 }, //?
+ Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x19 },
+ Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x1A },
+ Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x1B }
+ })
+ Name (PICM, Package (0x14)
+ {
+ Package (0x04) { 0x0001FFFF, 0x00, _SB.PCI0.LNKB, 0x00 },//Slot 2
+ Package (0x04) { 0x0001FFFF, 0x01, _SB.PCI0.LNKC, 0x00 },
+ Package (0x04) { 0x0001FFFF, 0x02, _SB.PCI0.LNKD, 0x00 },
+ Package (0x04) { 0x0001FFFF, 0x03, _SB.PCI0.LNKA, 0x00 },
+
+ Package (0x04) { 0x0003FFFF, 0x00, _SB.PCI0.LNKB, 0x00 },
+ Package (0x04) { 0x0003FFFF, 0x01, _SB.PCI0.LNKC, 0x00 },
+ Package (0x04) { 0x0003FFFF, 0x02, _SB.PCI0.LNKD, 0x00 },
+ Package (0x04) { 0x0003FFFF, 0x03, _SB.PCI0.LNKA, 0x00 },
+
+ Package (0x04) { 0x0004FFFF, 0x00, _SB.PCI0.LNKC, 0x00 },
+ Package (0x04) { 0x0004FFFF, 0x01, _SB.PCI0.LNKD, 0x00 },
+ Package (0x04) { 0x0004FFFF, 0x02, _SB.PCI0.LNKA, 0x00 },
+ Package (0x04) { 0x0004FFFF, 0x03, _SB.PCI0.LNKB, 0x00 },
+
+ Package (0x04) { 0x0005FFFF, 0x00, _SB.PCI0.LNKD, 0x00 },
+ Package (0x04) { 0x0005FFFF, 0x01, _SB.PCI0.LNKA, 0x00 },
+ Package (0x04) { 0x0005FFFF, 0x02, _SB.PCI0.LNKB, 0x00 },
+ Package (0x04) { 0x0005FFFF, 0x03, _SB.PCI0.LNKC, 0x00 },
+
+ Package (0x04) { 0x0006FFFF, 0x00, _SB.PCI0.LNKA, 0x00 },
+ Package (0x04) { 0x0006FFFF, 0x01, _SB.PCI0.LNKB, 0x00 },
+ Package (0x04) { 0x0006FFFF, 0x02, _SB.PCI0.LNKC, 0x00 },
+ Package (0x04) { 0x0006FFFF, 0x03, _SB.PCI0.LNKD, 0x00 }
+ })
+ Method (_PRT, 0, NotSerialized)
+ {
+ If (LNot (PICF)) { Return (PICM) }
+ Else { Return (APIC) }
+ }
+ }
+
+ Device (PG0B)
+ {
+ // 8132 pcix bridge 2
+ Method (_ADR, 0, NotSerialized)
+ {
+ Return (DADD(GHCD(HCIN, 0), 0x00010000))
+ }
+
+ Method (_PRW, 0, NotSerialized)
+ {
+ If (CondRefOf (_S3, Local0)) { Return (Package (0x02) { 0x22, 0x03 }) }
+ Else { Return (Package (0x02) { 0x22, 0x01 }) }
+ }
+
+ Name (APIC, Package (0x04)
+ {
+ // Slot A - PIRQ ABCD
+ Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x1F },// Slot 1
+ Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x20 },
+ Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x21 },
+ Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x22 }
+ })
+ Name (PICM, Package (0x04)
+ {
+ Package (0x04) { 0x0001FFFF, 0x00, _SB.PCI0.LNKA, 0x00 },//Slot 1
+ Package (0x04) { 0x0001FFFF, 0x01, _SB.PCI0.LNKB, 0x00 },
+ Package (0x04) { 0x0001FFFF, 0x02, _SB.PCI0.LNKC, 0x00 },
+ Package (0x04) { 0x0001FFFF, 0x03, _SB.PCI0.LNKD, 0x00 }
+ })
+ Method (_PRT, 0, NotSerialized)
+ {
+ If (LNot (PICF)) { Return (PICM) }
+ Else { Return (APIC) }
+ }
+ }
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8132_2.asl
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8132_2.asl 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,191 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+//
+
+ Device (PG0A)
+ {
+ // 8132 pcix bridge
+ Method (_ADR, 0, NotSerialized)
+ {
+ Return (DADD(GHCD(HCIN, 0), 0x00000000))
+ }
+
+ Method (_PRW, 0, NotSerialized)
+ {
+ If (CondRefOf (_S3, Local0)) { Return (Package (0x02) { 0x29, 0x03 }) }
+ Else { Return (Package (0x02) { 0x29, 0x01 }) }
+ }
+
+ Name (APIC, Package (0x10)
+ {
+ // Slot 1 - PIRQ ABCD
+ Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x0018 },
+ Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x0019 },
+ Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x001A },
+ Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x001B },
+ // Slot 2 - PIRQ BCDA
+ Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x0019 },
+ Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x001A },
+ Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x001B },
+ Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x0018 },
+ // Slot 3 - PIRQ CDAB
+ Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x001A },
+ Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x001B },
+ Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x0018 },
+ Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x0019 },
+ // Slot 4 - PIRQ DABC
+ Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x001B },
+ Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x0018 },
+ Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x0019 },
+ Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x001A },
+
+ })
+ Name (PICM, Package (0x04)
+ {
+ Package (0x04) { 0x0000FFFF, 0x00, _SB.PCI0.LNKA, 0x00 },//Slot 2
+ Package (0x04) { 0x0000FFFF, 0x01, _SB.PCI0.LNKB, 0x00 },
+ Package (0x04) { 0x0000FFFF, 0x02, _SB.PCI0.LNKC, 0x00 },
+ Package (0x04) { 0x0000FFFF, 0x03, _SB.PCI0.LNKD, 0x00 },
+//
+// Package (0x04) { 0x0001FFFF, 0x00, _SB.PCI0.LNKB, 0x00 },//Slot 2
+// Package (0x04) { 0x0001FFFF, 0x01, _SB.PCI0.LNKC, 0x00 },
+// Package (0x04) { 0x0001FFFF, 0x02, _SB.PCI0.LNKD, 0x00 },
+// Package (0x04) { 0x0001FFFF, 0x03, _SB.PCI0.LNKA, 0x00 },
+//
+// Package (0x04) { 0x0002FFFF, 0x00, _SB.PCI0.LNKC, 0x00 },//Slot 2
+// Package (0x04) { 0x0002FFFF, 0x01, _SB.PCI0.LNKD, 0x00 },
+// Package (0x04) { 0x0002FFFF, 0x02, _SB.PCI0.LNKA, 0x00 },
+// Package (0x04) { 0x0002FFFF, 0x03, _SB.PCI0.LNKB, 0x00 },
+//
+// Package (0x04) { 0x0003FFFF, 0x00, _SB.PCI0.LNKD, 0x00 },//Slot 2
+// Package (0x04) { 0x0003FFFF, 0x01, _SB.PCI0.LNKA, 0x00 },
+// Package (0x04) { 0x0003FFFF, 0x02, _SB.PCI0.LNKB, 0x00 },
+// Package (0x04) { 0x0003FFFF, 0x03, _SB.PCI0.LNKC, 0x00 },
+//
+ })
+
+ Name (DNCG, Ones)
+
+ Method (_PRT, 0, NotSerialized)
+ {
+ If (LEqual (^DNCG, Ones)) {
+ Multiply (HCIN, 0x000e, Local2) // GSI for 8132 is 7 so we get 14
+ Store (0x00, Local1)
+ While (LLess (Local1, 0x10))
+ {
+ // Update the GSI according to HCIN
+ Store(DeRefOf(Index (DeRefOf (Index (APIC, Local1)), 3)), Local0)
+ Add(Local2, Local0, Local0)
+ Store(Local0, Index (DeRefOf (Index (APIC, Local1)), 3))
+ Increment (Local1)
+ }
+
+ Store (0x00, ^DNCG)
+
+ }
+
+ If (LNot (PICF)) { Return (PICM) }
+ Else { Return (APIC) }
+ }
+ }
+
+ Device (PG0B)
+ {
+ // 8132 pcix bridge 2
+ Method (_ADR, 0, NotSerialized)
+ {
+ Return (DADD(GHCD(HCIN, 0), 0x00010000))
+ }
+
+ Method (_PRW, 0, NotSerialized)
+ {
+ If (CondRefOf (_S3, Local0)) { Return (Package (0x02) { 0x22, 0x03 }) }
+ Else { Return (Package (0x02) { 0x22, 0x01 }) }
+ }
+
+ Name (APIC, Package (0x10)
+ {
+ // Slot A - PIRQ ABCD
+ Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x001F },// Slot 1
+ Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x0020 },
+ Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x0021 },
+ Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x0022 },
+ // Slot A - PIRQ BCDA
+ Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x0020 },// Slot 1
+ Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x0021 },
+ Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x0022 },
+ Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x001F },
+ // Slot A - PIRQ CDAB
+ Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x0021 },// Slot 1
+ Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x0022 },
+ Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x001F },
+ Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x0020 },
+ // Slot A - PIRQ DABC
+ Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x0022 },// Slot 1
+ Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x001F },
+ Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x0020 },
+ Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x0021 },
+ })
+ Name (PICM, Package (0x04)
+ {
+ Package (0x04) { 0x0000FFFF, 0x00, _SB.PCI0.LNKA, 0x00 },//Slot 1
+ Package (0x04) { 0x0000FFFF, 0x01, _SB.PCI0.LNKB, 0x00 },
+ Package (0x04) { 0x0000FFFF, 0x02, _SB.PCI0.LNKC, 0x00 },
+ Package (0x04) { 0x0000FFFF, 0x03, _SB.PCI0.LNKD, 0x00 },
+
+// Package (0x04) { 0x0001FFFF, 0x00, _SB.PCI0.LNKB, 0x00 },//Slot 1
+// Package (0x04) { 0x0001FFFF, 0x01, _SB.PCI0.LNKC, 0x00 },
+// Package (0x04) { 0x0001FFFF, 0x02, _SB.PCI0.LNKD, 0x00 },
+// Package (0x04) { 0x0001FFFF, 0x03, _SB.PCI0.LNKA, 0x00 },
+//
+// Package (0x04) { 0x0002FFFF, 0x00, _SB.PCI0.LNKC, 0x00 },//Slot 1
+// Package (0x04) { 0x0002FFFF, 0x01, _SB.PCI0.LNKD, 0x00 },
+// Package (0x04) { 0x0002FFFF, 0x02, _SB.PCI0.LNKA, 0x00 },
+// Package (0x04) { 0x0002FFFF, 0x03, _SB.PCI0.LNKB, 0x00 },
+//
+// Package (0x04) { 0x0003FFFF, 0x00, _SB.PCI0.LNKD, 0x00 },//Slot 1
+// Package (0x04) { 0x0003FFFF, 0x01, _SB.PCI0.LNKA, 0x00 },
+// Package (0x04) { 0x0003FFFF, 0x02, _SB.PCI0.LNKB, 0x00 },
+// Package (0x04) { 0x0003FFFF, 0x03, _SB.PCI0.LNKC, 0x00 },
+//
+ })
+
+ Name (DNCG, Ones)
+
+ Method (_PRT, 0, NotSerialized)
+ {
+ If (LEqual (^DNCG, Ones)) {
+ Multiply (HCIN, 0x000e, Local2) // GSI for 8132 is 7 so we get 14
+ Store (0x00, Local1)
+ While (LLess (Local1, 0x10))
+ {
+ // Update the GSI according to HCIN
+ Store(DeRefOf(Index (DeRefOf (Index (APIC, Local1)), 3)), Local0)
+ Add(Local2, Local0, Local0)
+ Store(Local0, Index (DeRefOf (Index (APIC, Local1)), 3))
+ Increment (Local1)
+ }
+
+ Store (0x00, ^DNCG)
+
+ }
+
+ If (LNot (PICF)) { Return (PICM) }
+ Else { Return (APIC) }
+ }
+ }
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8151.asl
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8151.asl 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,48 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+//
+
+// AMD8151
+ Device (AGPB)
+ {
+ Method (_ADR, 0, NotSerialized)
+ {
+ Return (DADD(GHCD(HCIN, 0), 0x00010000))
+ }
+
+ Name (APIC, Package (0x04)
+ {
+ Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 },
+ Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 },
+ Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 },
+ Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 }
+ })
+ Name (PICM, Package (0x04)
+ {
+ Package (0x04) { 0x0000FFFF, 0x00, _SB.PCI0.LNKA, 0x00 },
+ Package (0x04) { 0x0000FFFF, 0x01, _SB.PCI0.LNKB, 0x00 },
+ Package (0x04) { 0x0000FFFF, 0x02, _SB.PCI0.LNKC, 0x00 },
+ Package (0x04) { 0x0000FFFF, 0x03, _SB.PCI0.LNKD, 0x00 }
+ })
+ Method (_PRT, 0, NotSerialized)
+ {
+ If (LNot (PICF)) { Return (PICM) }
+ Else { Return (APIC) }
+ }
+ }
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/dsdt_lb.dsl
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/dsdt_lb.dsl 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,242 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+//
+DefinitionBlock ("DSDT.aml", "DSDT", 1, "AMD-FAM10", "AMDACPI", 100925440)
+{
+
+// Scope (_PR)
+// {
+// Processor (CPU0, 0x00, 0x0000C010, 0x06) {}
+// Processor (CPU1, 0x01, 0x00000000, 0x00) {}
+// Processor (CPU2, 0x02, 0x00000000, 0x00) {}
+// Processor (CPU3, 0x03, 0x00000000, 0x00) {}
+// }
+
+ Method (FWSO, 0, NotSerialized) { }
+
+ Name (_S0, Package (0x04) { 0x00, 0x00, 0x00, 0x00 })
+ Name (_S1, Package (0x04) { 0x01, 0x01, 0x01, 0x01 })
+ Name (_S3, Package (0x04) { 0x05, 0x05, 0x05, 0x05 })
+ Name (_S5, Package (0x04) { 0x07, 0x07, 0x07, 0x07 })
+
+ Scope (_SB)
+ {
+ Device (PCI0)
+ {
+ // BUS0 root bus
+ External (BUSN)
+ External (MMIO)
+ External (PCIO)
+ External (SBLK)
+ External (TOM1)
+ External (HCLK)
+ External (SBDN)
+ External (HCDN)
+ External (CBST)
+ External (CBB)
+ External (CBS2)
+ External (CBB2)
+
+ Name (_HID, EisaId ("PNP0A03"))
+ Name (_ADR, 0x00000000)
+ Name (_UID, 0x01)
+
+ Name (HCIN, 0x00) // HC1
+
+ Method (_BBN, 0, NotSerialized)
+ {
+ Return (GBUS (GHCN(HCIN), GHCL(HCIN)))
+ }
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUF0, ResourceTemplate ()
+ {
+ IO (Decode16, 0x0CF8, 0x0CF8, 0x01, 0x08) //CF8-CFFh
+ IO (Decode16, 0xC000, 0xC000, 0x01, 0x80) //8000h
+ IO (Decode16, 0xC080, 0xC080, 0x01, 0x80) //8080h
+
+ WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x0000, // Address Space Granularity
+ 0x8100, // Address Range Minimum
+ 0xFFFF, // Address Range Maximum
+ 0x0000, // Address Translation Offset
+ 0x7F00,,,
+ , TypeStatic) //8100h-FFFFh
+
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+ 0x00000000, // Address Space Granularity
+ 0x000C0000, // Address Range Minimum
+ 0x00000000, // Address Range Maximum
+ 0x00000000, // Address Translation Offset
+ 0x00000000,,,
+ , AddressRangeMemory, TypeStatic) //Video BIOS A0000h-C7FFFh
+
+ Memory32Fixed (ReadWrite, 0x000D8000, 0x00004000)//USB HC D8000-DBFFF
+
+ WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x0000, // Address Space Granularity
+ 0x0000, // Address Range Minimum
+ 0x03AF, // Address Range Maximum
+ 0x0000, // Address Translation Offset
+ 0x03B0,,,
+ , TypeStatic) //0-CF7h
+
+ WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x0000, // Address Space Granularity
+ 0x03E0, // Address Range Minimum
+ 0x0CF7, // Address Range Maximum
+ 0x0000, // Address Translation Offset
+ 0x0918,,,
+ , TypeStatic) //0-CF7h
+ })
+ _SB.OSTP ()
+ CreateDWordField (BUF0, 0x3E, VLEN)
+ CreateDWordField (BUF0, 0x36, VMAX)
+ CreateDWordField (BUF0, 0x32, VMIN)
+ ShiftLeft (VGA1, 0x09, Local0)
+ Add (VMIN, Local0, VMAX)
+ Decrement (VMAX)
+ Store (Local0, VLEN)
+ Concatenate (_SB.GMEM (0x00, _SB.PCI0.SBLK), BUF0, Local1)
+ Concatenate (_SB.GIOR (0x00, _SB.PCI0.SBLK), Local1, Local2)
+ Concatenate (_SB.GWBN (0x00, _SB.PCI0.SBLK), Local2, Local3)
+ Return (Local3)
+ }
+
+ Include ("pci0_hc.asl")
+
+ }
+ Device (PCI1)
+ {
+ Name (_HID, "PNP0A03")
+ Name (_ADR, 0x00000000)
+ Name (_UID, 0x02)
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (_SB.PCI0.CBST)
+ }
+ Method (_BBN, 0, NotSerialized)
+ {
+ Return (_SB.PCI0.CBB) // 0 or 0xff
+ }
+
+ }
+ Device (PCI2)
+ {
+ Name (_HID, "PNP0A03")
+ Name (_ADR, 0x00000000)
+ Name (_UID, 0x02)
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (_SB.PCI0.CBS2)
+ }
+ Method (_BBN, 0, NotSerialized)
+ {
+ Return (_SB.PCI0.CBB2)// 0xfe
+ }
+ }
+ }
+
+ Scope (_GPE)
+ {
+ Method (_L08, 0, NotSerialized)
+ {
+ Notify (_SB.PCI0, 0x02) //PME# Wakeup
+ }
+
+ Method (_L0F, 0, NotSerialized)
+ {
+ Notify (_SB.PCI0.TP2P.USB0, 0x02) //USB Wakeup
+ }
+
+ Method (_L22, 0, NotSerialized) // GPIO18 (LID) - Pogo 0 Bridge B
+ {
+ Notify (_SB.PCI0.PG0B, 0x02)
+ }
+
+ Method (_L29, 0, NotSerialized) // GPIO25 (Suspend) - Pogo 0 Bridge A
+ {
+ Notify (_SB.PCI0.PG0A, 0x02)
+ }
+ }
+
+ Method (_PTS, 1, NotSerialized)
+ {
+ Or (Arg0, 0xF0, Local0)
+ Store (Local0, DBG1)
+ }
+//
+// Method (_WAK, 1, NotSerialized)
+// {
+// Or (Arg0, 0xE0, Local0)
+// Store (Local0, DBG1)
+// }
+
+ Name (PICF, 0x00) //Flag Variable for PIC vs. I/O APIC Mode
+ Method (_PIC, 1, NotSerialized) //PIC Flag and Interface Method
+ {
+ Store (Arg0, PICF)
+ }
+
+ OperationRegion (DEBG, SystemIO, 0x80, 0x01)
+ Field (DEBG, ByteAcc, Lock, Preserve)
+ {
+ DBG1, 8
+ }
+
+ OperationRegion (EXTM, SystemMemory, 0x000FF83C, 0x04)
+ Field (EXTM, WordAcc, Lock, Preserve)
+ {
+ AMEM, 32
+ }
+
+ OperationRegion (VGAM, SystemMemory, 0x000C0002, 0x01)
+ Field (VGAM, ByteAcc, Lock, Preserve)
+ {
+ VGA1, 8
+ }
+
+ OperationRegion (GRAM, SystemMemory, 0x0400, 0x0100)
+ Field (GRAM, ByteAcc, Lock, Preserve)
+ {
+ Offset (0x10),
+ FLG0, 8
+ }
+
+ OperationRegion (GSTS, SystemIO, 0xC028, 0x02)
+ Field (GSTS, ByteAcc, NoLock, Preserve)
+ {
+ , 4,
+ IRQR, 1
+ }
+
+ OperationRegion (Z007, SystemIO, 0x21, 0x01)
+ Field (Z007, ByteAcc, NoLock, Preserve)
+ {
+ Z008, 8
+ }
+
+ OperationRegion (Z009, SystemIO, 0xA1, 0x01)
+ Field (Z009, ByteAcc, NoLock, Preserve)
+ {
+ Z00A, 8
+ }
+
+ Include ("amdfam10_util.asl")
+}
\ No newline at end of file
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/htx_no_ioapic.asl
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/htx_no_ioapic.asl 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,35 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+//
+
+ Device (HTXA)
+ {
+ // HTX
+ Method (_ADR, 0, NotSerialized)
+ {
+ Return (DADD(GHCD(HCIN, 0), 0x00000000))
+ }
+
+ Method (_PRW, 0, NotSerialized)
+ {
+ If (CondRefOf (_S3, Local0)) { Return (Package (0x02) { 0x29, 0x03 }) }
+ Else { Return (Package (0x02) { 0x29, 0x01 }) }
+ }
+
+ }
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci0_hc.asl
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci0_hc.asl 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,20 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+//
+ Include ("amd8111.asl") //real SB at first
+ Include ("amd8132.asl")
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci2.asl
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci2.asl 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,83 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+//
+DefinitionBlock ("SSDT2.aml", "SSDT", 1, "AMD-FAM10", "AMDACPI", 100925440)
+{
+ Scope (_SB)
+ {
+ External (DADD, MethodObj)
+ External (GHCE, MethodObj)
+ External (GHCN, MethodObj)
+ External (GHCL, MethodObj)
+ External (GHCD, MethodObj)
+ External (GNUS, MethodObj)
+ External (GIOR, MethodObj)
+ External (GMEM, MethodObj)
+ External (GWBN, MethodObj)
+ External (GBUS, MethodObj)
+
+ External (PICF)
+
+ External (_SB.PCI0.LNKA, DeviceObj)
+ External (_SB.PCI0.LNKB, DeviceObj)
+ External (_SB.PCI0.LNKC, DeviceObj)
+ External (_SB.PCI0.LNKD, DeviceObj)
+
+ Device (PCIX)
+ {
+
+ // BUS ? Second HT Chain
+ Name (HCIN, 0xcc) // HC2 0x01
+
+ Name (_UID, 0xdd) // HC 0x03
+
+ Name (_HID, "PNP0A03")
+
+ Method (_ADR, 0, NotSerialized) //Fake bus should be 0
+ {
+ Return (DADD(GHCN(HCIN), 0x00000000))
+ }
+
+ Method (_BBN, 0, NotSerialized)
+ {
+ Return (GBUS (GHCN(HCIN), GHCL(HCIN)))
+ }
+
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (_SB.GHCE(HCIN))
+ }
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUF0, ResourceTemplate () { })
+ Store( GHCN(HCIN), Local4)
+ Store( GHCL(HCIN), Local5)
+
+ Concatenate (_SB.GIOR (Local4, Local5), BUF0, Local1)
+ Concatenate (_SB.GMEM (Local4, Local5), Local1, Local2)
+ Concatenate (_SB.GWBN (Local4, Local5), Local2, Local3)
+ Return (Local3)
+ }
+
+ Include ("pci2_hc.asl")
+ }
+ }
+
+}
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci2_hc.asl
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci2_hc.asl 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,20 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+//
+
+ Include ("amd8132_2.asl")
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci3.asl
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci3.asl 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,83 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+//
+DefinitionBlock ("SSDT3.aml", "SSDT", 1, "AMD-FAM10", "AMDACPI", 100925440)
+{
+ Scope (_SB)
+ {
+ External (DADD, MethodObj)
+ External (GHCE, MethodObj)
+ External (GHCN, MethodObj)
+ External (GHCL, MethodObj)
+ External (GHCD, MethodObj)
+ External (GNUS, MethodObj)
+ External (GIOR, MethodObj)
+ External (GMEM, MethodObj)
+ External (GWBN, MethodObj)
+ External (GBUS, MethodObj)
+
+ External (PICF)
+
+ External (_SB.PCI0.LNKA, DeviceObj)
+ External (_SB.PCI0.LNKB, DeviceObj)
+ External (_SB.PCI0.LNKC, DeviceObj)
+ External (_SB.PCI0.LNKD, DeviceObj)
+
+ Device (PCIX)
+ {
+
+ // BUS ? Second HT Chain
+ Name (HCIN, 0xcc) // HC2 0x01
+
+ Name (_UID, 0xdd) // HC 0x03
+
+ Name (_HID, "PNP0A03")
+
+ Method (_ADR, 0, NotSerialized) //Fake bus should be 0
+ {
+ Return (DADD(GHCN(HCIN), 0x00000000))
+ }
+
+ Method (_BBN, 0, NotSerialized)
+ {
+ Return (GBUS (GHCN(HCIN), GHCL(HCIN)))
+ }
+
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (_SB.GHCE(HCIN))
+ }
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUF0, ResourceTemplate () { })
+ Store( GHCN(HCIN), Local4)
+ Store( GHCL(HCIN), Local5)
+
+ Concatenate (_SB.GIOR (Local4, Local5), BUF0, Local1)
+ Concatenate (_SB.GMEM (Local4, Local5), Local1, Local2)
+ Concatenate (_SB.GWBN (Local4, Local5), Local2, Local3)
+ Return (Local3)
+ }
+
+ Include ("pci3_hc.asl")
+ }
+ }
+
+}
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci3_hc.asl
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci3_hc.asl 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,20 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+//
+
+ Include ("amd8151.asl")
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci4.asl
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci4.asl 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,83 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+//
+DefinitionBlock ("SSDT4.aml", "SSDT", 1, "AMD-FAM10", "AMDACPI", 100925440)
+{
+ Scope (_SB)
+ {
+ External (DADD, MethodObj)
+ External (GHCE, MethodObj)
+ External (GHCN, MethodObj)
+ External (GHCL, MethodObj)
+ External (GHCD, MethodObj)
+ External (GNUS, MethodObj)
+ External (GIOR, MethodObj)
+ External (GMEM, MethodObj)
+ External (GWBN, MethodObj)
+ External (GBUS, MethodObj)
+
+ External (PICF)
+
+ External (_SB.PCI0.LNKA, DeviceObj)
+ External (_SB.PCI0.LNKB, DeviceObj)
+ External (_SB.PCI0.LNKC, DeviceObj)
+ External (_SB.PCI0.LNKD, DeviceObj)
+
+ Device (PCIX)
+ {
+
+ // BUS ? Second HT Chain
+ Name (HCIN, 0xcc) // HC2 0x01
+
+ Name (_UID, 0xdd) // HC 0x03
+
+ Name (_HID, "PNP0A03")
+
+ Method (_ADR, 0, NotSerialized) //Fake bus should be 0
+ {
+ Return (DADD(GHCN(HCIN), 0x00000000))
+ }
+
+ Method (_BBN, 0, NotSerialized)
+ {
+ Return (GBUS (GHCN(HCIN), GHCL(HCIN)))
+ }
+
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (_SB.GHCE(HCIN))
+ }
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUF0, ResourceTemplate () { })
+ Store( GHCN(HCIN), Local4)
+ Store( GHCL(HCIN), Local5)
+
+ Concatenate (_SB.GIOR (Local4, Local5), BUF0, Local1)
+ Concatenate (_SB.GMEM (Local4, Local5), Local1, Local2)
+ Concatenate (_SB.GWBN (Local4, Local5), Local2, Local3)
+ Return (Local3)
+ }
+
+ Include ("pci4_hc.asl")
+ }
+ }
+
+}
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci4_hc.asl
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci4_hc.asl 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,20 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+//
+
+ Include ("amd8131_2.asl")
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci5.asl
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci5.asl 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,84 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+//
+
+DefinitionBlock ("SSDT5.aml", "SSDT", 1, "AMD-FAM10", "AMDACPI", 100925440)
+{
+ Scope (_SB)
+ {
+ External (DADD, MethodObj)
+ External (GHCE, MethodObj)
+ External (GHCN, MethodObj)
+ External (GHCL, MethodObj)
+ External (GHCD, MethodObj)
+ External (GNUS, MethodObj)
+ External (GIOR, MethodObj)
+ External (GMEM, MethodObj)
+ External (GWBN, MethodObj)
+ External (GBUS, MethodObj)
+
+ External (PICF)
+
+ External (_SB.PCI0.LNKA, DeviceObj)
+ External (_SB.PCI0.LNKB, DeviceObj)
+ External (_SB.PCI0.LNKC, DeviceObj)
+ External (_SB.PCI0.LNKD, DeviceObj)
+
+ Device (PCIX)
+ {
+
+ // BUS ? Second HT Chain
+ Name (HCIN, 0xcc) // HC2 0x01
+
+ Name (_UID, 0xdd) // HC 0x03
+
+ Name (_HID, "PNP0A03")
+
+ Method (_ADR, 0, NotSerialized) //Fake bus should be 0
+ {
+ Return (DADD(GHCN(HCIN), 0x00000000))
+ }
+
+ Method (_BBN, 0, NotSerialized)
+ {
+ Return (GBUS (GHCN(HCIN), GHCL(HCIN)))
+ }
+
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (_SB.GHCE(HCIN))
+ }
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUF0, ResourceTemplate () { })
+ Store( GHCN(HCIN), Local4)
+ Store( GHCL(HCIN), Local5)
+
+ Concatenate (_SB.GIOR (Local4, Local5), BUF0, Local1)
+ Concatenate (_SB.GMEM (Local4, Local5), Local1, Local2)
+ Concatenate (_SB.GWBN (Local4, Local5), Local2, Local3)
+ Return (Local3)
+ }
+
+ Include ("pci5_hc.asl")
+ }
+ }
+
+}
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci5_hc.asl
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci5_hc.asl 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,20 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+//
+
+ Include ("htx_no_ioapic.asl")
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/superio.asl
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/superio.asl 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,20 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+//
+
+// Include ("w83627hf.asl")
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/fadt.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/fadt.c 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,172 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2005 Stefan Reinauer stepan@openbios.org
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+/*
+ * ACPI - create the Fixed ACPI Description Tables (FADT)
+ */
+
+
+#include <string.h>
+#include <console/console.h>
+#include <arch/acpi.h>
+
+extern u32 pm_base; /* pm_base should be set in sb acpi */
+
+void acpi_create_fadt(acpi_fadt_t *fadt,acpi_facs_t *facs,void *dsdt){
+
+ acpi_header_t *header=&(fadt->header);
+
+ printk_debug("pm_base: 0x%04x\n", pm_base);
+
+ /* Prepare the header */
+ memset((void *)fadt,0,sizeof(acpi_fadt_t));
+ memcpy(header->signature,"FACP",4);
+ header->length = 244;
+ header->revision = 1;
+ memcpy(header->oem_id,OEM_ID,6);
+ memcpy(header->oem_table_id,"LXBACPI ",8);
+ memcpy(header->asl_compiler_id,ASLC,4);
+ header->asl_compiler_revision=0;
+
+ fadt->firmware_ctrl=(u32)facs;
+ fadt->dsdt= (u32)dsdt;
+ fadt->res1=0x0;
+ // 3=Workstation,4=Enterprise Server, 7=Performance Server
+ fadt->preferred_pm_profile=0x03;
+ fadt->sci_int=9;
+ // disable system management mode by setting to 0:
+ fadt->smi_cmd = 0;//pm_base+0x2f;
+ fadt->acpi_enable = 0xf0;
+ fadt->acpi_disable = 0xf1;
+ fadt->s4bios_req = 0x0;
+ fadt->pstate_cnt = 0x00; // SMM is not used for p-state control
+// fadt->pstate_cnt = 0xe2;
+
+ fadt->pm1a_evt_blk = pm_base;
+ fadt->pm1b_evt_blk = 0x0000;
+ fadt->pm1a_cnt_blk = pm_base+0x04;
+ fadt->pm1b_cnt_blk = 0x0000;
+ fadt->pm2_cnt_blk = 0x0000;
+ fadt->pm_tmr_blk = pm_base+0x08;
+ fadt->gpe0_blk = pm_base+0x20;
+ fadt->gpe1_blk = pm_base+0xb0;
+
+ fadt->pm1_evt_len = 4;
+ fadt->pm1_cnt_len = 2;
+ fadt->pm2_cnt_len = 0;
+ fadt->pm_tmr_len = 4;
+ fadt->gpe0_blk_len = 4;
+ fadt->gpe1_blk_len = 8;
+ fadt->gpe1_base = 16;
+
+ fadt->cst_cnt = 0x00;// SMM is not used for p-state control
+// fadt->cst_cnt = 0xe3;
+ fadt->p_lvl2_lat = 101;
+ fadt->p_lvl3_lat = 1001;
+ fadt->flush_size = 0;
+ fadt->flush_stride = 0;
+ fadt->duty_offset = 1;
+ fadt->duty_width = 3;
+ fadt->day_alrm = 0; // 0x7d these have to be
+ fadt->mon_alrm = 0; // 0x7e added to cmos.layout
+ fadt->century = 0; // 0x7f to make rtc alrm work
+ fadt->iapc_boot_arch = 0x3; // See table 5-11
+ fadt->flags = 0x25;
+
+ fadt->res2 = 0;
+
+ fadt->reset_reg.space_id = 1;
+ fadt->reset_reg.bit_width = 8;
+ fadt->reset_reg.bit_offset = 0;
+ fadt->reset_reg.resv = 0;
+ fadt->reset_reg.addrl = 0xcf9;
+ fadt->reset_reg.addrh = 0x0;
+
+ fadt->reset_value = 6;
+ fadt->x_firmware_ctl_l = (u32)facs;
+ fadt->x_firmware_ctl_h = 0;
+ fadt->x_dsdt_l = (u32)dsdt;
+ fadt->x_dsdt_h = 0;
+
+ fadt->x_pm1a_evt_blk.space_id = 1;
+ fadt->x_pm1a_evt_blk.bit_width = 32;
+ fadt->x_pm1a_evt_blk.bit_offset = 0;
+ fadt->x_pm1a_evt_blk.resv = 0;
+ fadt->x_pm1a_evt_blk.addrl = pm_base;
+ fadt->x_pm1a_evt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_evt_blk.space_id = 1;
+ fadt->x_pm1b_evt_blk.bit_width = 4;
+ fadt->x_pm1b_evt_blk.bit_offset = 0;
+ fadt->x_pm1b_evt_blk.resv = 0;
+ fadt->x_pm1b_evt_blk.addrl = 0x0;
+ fadt->x_pm1b_evt_blk.addrh = 0x0;
+
+
+ fadt->x_pm1a_cnt_blk.space_id = 1;
+ fadt->x_pm1a_cnt_blk.bit_width = 16;
+ fadt->x_pm1a_cnt_blk.bit_offset = 0;
+ fadt->x_pm1a_cnt_blk.resv = 0;
+ fadt->x_pm1a_cnt_blk.addrl = pm_base+4;
+ fadt->x_pm1a_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_cnt_blk.space_id = 1;
+ fadt->x_pm1b_cnt_blk.bit_width = 2;
+ fadt->x_pm1b_cnt_blk.bit_offset = 0;
+ fadt->x_pm1b_cnt_blk.resv = 0;
+ fadt->x_pm1b_cnt_blk.addrl = 0x0;
+ fadt->x_pm1b_cnt_blk.addrh = 0x0;
+
+
+ fadt->x_pm2_cnt_blk.space_id = 1;
+ fadt->x_pm2_cnt_blk.bit_width = 0;
+ fadt->x_pm2_cnt_blk.bit_offset = 0;
+ fadt->x_pm2_cnt_blk.resv = 0;
+ fadt->x_pm2_cnt_blk.addrl = 0x0;
+ fadt->x_pm2_cnt_blk.addrh = 0x0;
+
+
+ fadt->x_pm_tmr_blk.space_id = 1;
+ fadt->x_pm_tmr_blk.bit_width = 32;
+ fadt->x_pm_tmr_blk.bit_offset = 0;
+ fadt->x_pm_tmr_blk.resv = 0;
+ fadt->x_pm_tmr_blk.addrl = pm_base+0x08;
+ fadt->x_pm_tmr_blk.addrh = 0x0;
+
+
+ fadt->x_gpe0_blk.space_id = 1;
+ fadt->x_gpe0_blk.bit_width = 32;
+ fadt->x_gpe0_blk.bit_offset = 0;
+ fadt->x_gpe0_blk.resv = 0;
+ fadt->x_gpe0_blk.addrl = pm_base+0x20;
+ fadt->x_gpe0_blk.addrh = 0x0;
+
+
+ fadt->x_gpe1_blk.space_id = 1;
+ fadt->x_gpe1_blk.bit_width = 64;
+ fadt->x_gpe1_blk.bit_offset = 16;
+ fadt->x_gpe1_blk.resv = 0;
+ fadt->x_gpe1_blk.addrl = pm_base+0xb0;
+ fadt->x_gpe1_blk.addrh = 0x0;
+
+ header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t));
+
+}
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/get_bus_conf.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/get_bus_conf.c 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,229 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <string.h>
+#include <stdint.h>
+#if CONFIG_LOGICAL_CPUS==1
+#include <cpu/amd/dualcore.h>
+#endif
+
+#include <cpu/amd/amdfam10_sysconf.h>
+
+#include "mb_sysconf.h"
+
+/* Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables */
+struct mb_sysconf_t mb_sysconf;
+
+/* Here you only need to set value in pci1234 for HT-IO that could be
+installed or not You may need to preset pci1234 for HTIO board, please
+refer to src/northbridge/amd/amdfam10/get_sblk_pci1234.c for detail */
+static u32 pci1234x[] = {
+ 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
+ 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
+ 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
+ 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
+ 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
+ 0x0000ffc, 0x0000ffc,
+ };
+
+
+/* HT Chain device num, actually it is unit id base of every ht device
+in chain, assume every chain only have 4 ht device at most */
+
+static unsigned hcdnx[] = {
+ 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
+ 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
+ 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
+ 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
+ 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
+ 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
+ 0x20202020, 0x20202020,
+};
+
+
+
+extern void get_pci1234(void);
+
+static u32 get_bus_conf_done = 0;
+
+static u32 get_hcid(u32 i)
+{
+ u32 id = 0;
+ u32 busn = (sysconf.pci1234[i] >> 12) & 0xff;
+ u32 devn = sysconf.hcdn[i] & 0xff;
+ device_t dev;
+
+ dev = dev_find_slot(busn, PCI_DEVFN(devn,0));
+
+ switch (dev->device) {
+ case 0x7458: //8132
+ id = 1;
+ break;
+ case 0x7454: //8151
+ id = 2;
+ break;
+ case 0x7450: //8131
+ id = 3;
+ break;
+ }
+ // we may need more way to find out hcid: subsystem id? GPIO read ?
+ // we need use id for 1. bus num, 2. mptable, 3. acpi table
+ return id;
+}
+
+void get_bus_conf(void)
+{
+ u32 apicid_base;
+
+ device_t dev;
+ int i, j;
+ struct mb_sysconf_t *m;
+
+ if(get_bus_conf_done == 1)
+ return; //do it only once
+
+ get_bus_conf_done = 1;
+
+ sysconf.mb = &mb_sysconf;
+
+ m = sysconf.mb;
+
+ for(i=0;i<256; i++) {
+ m->bus_type[i] = 0;
+ }
+
+ sysconf.hc_possible_num = sizeof(pci1234x)/sizeof(pci1234x[0]);
+ for(i=0;i<sysconf.hc_possible_num; i++) {
+ sysconf.pci1234[i] = pci1234x[i];
+ sysconf.hcdn[i] = hcdnx[i];
+ }
+
+ get_pci1234();
+
+ m->bus_type[0] = 1; //pci
+
+ sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff;
+ m->sbdn3 = sysconf.hcdn[0] & 0xff;
+
+ m->bus_8132_0 = (sysconf.pci1234[0] >> 12) & 0xff;
+ m->bus_8111_0 = m->bus_8132_0;
+
+ /* 8111 */
+ dev = dev_find_slot(m->bus_8111_0, PCI_DEVFN(sysconf.sbdn,0));
+ if (dev) {
+ m->bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ } else {
+ printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8111_0, sysconf.sbdn);
+ }
+
+ /* 8132-1 */
+ dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3,0));
+ if (dev) {
+ m->bus_8132_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ } else {
+ printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3);
+ }
+
+ /* 8132-2 */
+ dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3+1,0));
+ if (dev) {
+ m->bus_8132_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ } else {
+ printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3+1);
+ }
+
+ for(i=0; i< sysconf.hc_possible_num; i++) {
+ if(!(sysconf.pci1234[i] & 0x1) ) continue;
+
+ u32 busn = (sysconf.pci1234[i] >> 12) & 0xff;
+ u32 busn_max = (sysconf.pci1234[i] >> 20) & 0xff;
+ for (j = busn; j <= busn_max; j++)
+ m->bus_type[j] = 1;
+ if(m->bus_isa <= busn_max)
+ m->bus_isa = busn_max + 1;
+ printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa);
+ }
+
+ /* HT chain 1 */
+ j=0;
+ for(i=1; i< sysconf.hc_possible_num; i++) {
+ if(!(sysconf.pci1234[i] & 0x1) ) continue;
+
+ // check hcid type here
+ sysconf.hcid[i] = get_hcid(i);
+
+ switch(sysconf.hcid[i]) {
+
+ case 1: //8132
+ case 3: //8131
+
+ m->bus_8132a[j][0] = (sysconf.pci1234[i] >> 12) & 0xff;
+
+ m->sbdn3a[j] = sysconf.hcdn[i] & 0xff;
+
+ /* 8132-1 */
+ dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j],0));
+ if (dev) {
+ m->bus_8132a[j][1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ } else {
+ printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132a[j][0], m->sbdn3a[j]);
+ }
+
+ /* 8132-2 */
+ dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j]+1,0));
+ if (dev) {
+ m->bus_8132a[j][2] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ } else {
+ printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132a[j][0], m->sbdn3a[j]+1);
+ }
+
+ break;
+
+ case 2: //8151
+
+ m->bus_8151[j][0] = (sysconf.pci1234[i] >> 12) & 0xff;
+ m->sbdn5[j] = sysconf.hcdn[i] & 0xff;
+ /* 8151 */
+ dev = dev_find_slot(m->bus_8151[j][0], PCI_DEVFN(m->sbdn5[j]+1, 0));
+
+ if (dev) {
+ m->bus_8151[j][1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ } else {
+ printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8151[j][0], m->sbdn5[j]+1);
+ }
+
+ break;
+ }
+
+ j++;
+ }
+
+/*I/O APICs: APIC ID Version State Address*/
+ apicid_base = 0;
+ m->apicid_8111 = apicid_base + 0;
+ m->apicid_8132_1 = apicid_base + 1;
+ m->apicid_8132_2 = apicid_base + 2;
+ for(i=0;i<j;i++) {
+ m->apicid_8132a[i][0] = apicid_base + 3 + i * 2;
+ m->apicid_8132a[i][1] = apicid_base + 3 + i * 2 + 1;
+ }
+}
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/irq_tables.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/irq_tables.c 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,144 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/pirq_routing.h>
+#include <cpu/amd/amdfam10_sysconf.h>
+
+#include "mb_sysconf.h"
+
+static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, u8 link0, u16 bitmap0,
+ u8 link1, u16 bitmap1, u8 link2, u16 bitmap2,u8 link3, u16 bitmap3,
+ u8 slot, u8 rfu)
+{
+ pirq_info->bus = bus;
+ pirq_info->devfn = devfn;
+ pirq_info->irq[0].link = link0;
+ pirq_info->irq[0].bitmap = bitmap0;
+ pirq_info->irq[1].link = link1;
+ pirq_info->irq[1].bitmap = bitmap1;
+ pirq_info->irq[2].link = link2;
+ pirq_info->irq[2].bitmap = bitmap2;
+ pirq_info->irq[3].link = link3;
+ pirq_info->irq[3].bitmap = bitmap3;
+ pirq_info->slot = slot;
+ pirq_info->rfu = rfu;
+}
+
+
+extern void get_bus_conf(void);
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+
+ struct irq_routing_table *pirq;
+ struct irq_info *pirq_info;
+ u32 slot_num;
+ u8 *v;
+
+ u8 sum=0;
+ int i;
+
+ struct mb_sysconf_t *m;
+
+ get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
+
+ m = sysconf.mb;
+
+ /* Align the table to be 16 byte aligned. */
+ addr += 15;
+ addr &= ~15;
+
+ /* This table must be betweeen 0xf0000 & 0x100000 */
+ printk_info("Writing IRQ routing tables to 0x%x...", addr);
+
+ pirq = (void *)(addr);
+ v = (u8 *)(addr);
+
+ pirq->signature = PIRQ_SIGNATURE;
+ pirq->version = PIRQ_VERSION;
+
+ pirq->rtr_bus = m->bus_8111_0;
+ pirq->rtr_devfn = ((sysconf.sbdn+1)<<3)|0;
+
+ pirq->exclusive_irqs = 0;
+
+ pirq->rtr_vendor = 0x1022;
+ pirq->rtr_device = 0x746b;
+
+ pirq->miniport_data = 0;
+
+ memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+ pirq_info = (void *) ( &pirq->checksum + 1);
+ slot_num = 0;
+
+
+ //pci bridge
+ write_pirq_info(pirq_info, m->bus_8111_0, ((sysconf.sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+ pirq_info++; slot_num++;
+
+
+ //pcix bridge
+// write_pirq_info(pirq_info, m->bus_8132_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+// pirq_info++; slot_num++;
+
+ int j=0;
+
+ for(i=1; i< sysconf.hc_possible_num; i++) {
+ if(!(sysconf.pci1234[i] & 0x1) ) continue;
+ u32 busn = (sysconf.pci1234[i] >> 12) & 0xff;
+ u32 devn = sysconf.hcdn[i] & 0xff;
+
+ write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+ pirq_info++; slot_num++;
+ j++;
+
+ }
+
+#if CBB
+ write_pirq_info(pirq_info, CBB, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+ pirq_info++; slot_num++;
+ if(sysconf.nodes>32) {
+ write_pirq_info(pirq_info, CBB-1, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+ pirq_info++; slot_num++;
+ }
+#endif
+
+ pirq->size = 32 + 16 * slot_num;
+
+ for (i = 0; i < pirq->size; i++) {
+ sum += v[i];
+ }
+
+ sum = pirq->checksum - sum;
+
+ if (sum != pirq->checksum) {
+ pirq->checksum = sum;
+ }
+
+ printk_info("done.\n");
+
+ return (unsigned long) pirq_info;
+
+}
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/mainboard.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/mainboard.c 2007-12-12 16:38:08.000000000 -0700
@@ -0,0 +1,32 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "chip.h"
+
+#if CONFIG_CHIP_NAME == 1
+struct chip_operations mainboard_amd_serengeti_cheetah_fam10_ops = {
+ CHIP_NAME("AMD family 10 Cheetah mainboard")
+};
+#endif
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/mb_sysconf.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/mb_sysconf.h 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,45 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef MB_SYSCONF_H
+
+#define MB_SYSCONF_H
+
+struct mb_sysconf_t {
+ u8 bus_isa;
+ u8 bus_8132_0;
+ u8 bus_8132_1;
+ u8 bus_8132_2;
+ u8 bus_8111_0;
+ u8 bus_8111_1;
+ u8 bus_8132a[31][3];
+ u8 bus_8151[31][2];
+
+ u32 apicid_8111;
+ u32 apicid_8132_1;
+ u32 apicid_8132_2;
+ u32 apicid_8132a[31][2];
+ u32 sbdn3;
+ u32 sbdn3a[31];
+ u32 sbdn5[31];
+ u32 bus_type[256];
+};
+
+#endif
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/mptable.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/mptable.c 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,237 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#if CONFIG_LOGICAL_CPUS==1
+#include <cpu/amd/dualcore.h>
+#endif
+
+#include <cpu/amd/amdfam10_sysconf.h>
+#include "mb_sysconf.h"
+
+extern void get_bus_conf(void);
+
+void *smp_write_config_table(void *v)
+{
+ static const char sig[4] = "PCMP";
+ static const char oem[8] = "AMD ";
+ static const char productid[12] = "SERENGETI ";
+ struct mp_config_table *mc;
+
+ int i;
+ int j;
+ struct mb_sysconf_t *m;
+
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+ memset(mc, 0, sizeof(*mc));
+
+ memcpy(mc->mpc_signature, sig, sizeof(sig));
+ mc->mpc_length = sizeof(*mc); /* initially just the header */
+ mc->mpc_spec = 0x04;
+ mc->mpc_checksum = 0; /* not yet computed */
+ memcpy(mc->mpc_oem, oem, sizeof(oem));
+ memcpy(mc->mpc_productid, productid, sizeof(productid));
+ mc->mpc_oemptr = 0;
+ mc->mpc_oemsize = 0;
+ mc->mpc_entry_count = 0; /* No entries yet... */
+ mc->mpc_lapic = LAPIC_ADDR;
+ mc->mpe_length = 0;
+ mc->mpe_checksum = 0;
+ mc->reserved = 0;
+
+ smp_write_processors(mc);
+
+ get_bus_conf();
+
+ m = sysconf.mb;
+
+ /*Bus: Bus ID Type*/
+ /* define bus and isa numbers */
+ for(j= 0; j < 256 ; j++) {
+ if(m->bus_type[j])
+ smp_write_bus(mc, j, "PCI ");
+ }
+ smp_write_bus(mc, m->bus_isa, "ISA ");
+
+ /*I/O APICs: APIC ID Version State Address*/
+ smp_write_ioapic(mc, m->apicid_8111, 0x11, 0xfec00000); //8111
+ {
+ device_t dev;
+ struct resource *res;
+ dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3, 1));
+ if (dev) {
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ if (res) {
+ smp_write_ioapic(mc, m->apicid_8132_1, 0x11, res->base);
+ }
+ }
+ dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3+1, 1));
+ if (dev) {
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ if (res) {
+ smp_write_ioapic(mc, m->apicid_8132_2, 0x11, res->base);
+ }
+ }
+
+ j = 0;
+
+ for(i=1; i< sysconf.hc_possible_num; i++) {
+ if(!(sysconf.pci1234[i] & 0x1) ) continue;
+
+ switch(sysconf.hcid[i]) {
+ case 1:
+ case 3:
+ dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j], 1));
+ if (dev) {
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ if (res) {
+ smp_write_ioapic(mc, m->apicid_8132a[j][0], 0x11, res->base);
+ }
+ }
+ dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j]+1, 1));
+ if (dev) {
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ if (res) {
+ smp_write_ioapic(mc, m->apicid_8132a[j][1], 0x11, res->base);
+ }
+ }
+ break;
+ }
+ j++;
+ }
+
+ }
+
+ /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
+ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_8111, 0x0);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x1, m->apicid_8111, 0x1);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_8111, 0x2);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x3, m->apicid_8111, 0x3);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x4, m->apicid_8111, 0x4);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x5, m->apicid_8111, 0x5);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x6, m->apicid_8111, 0x6);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x7, m->apicid_8111, 0x7);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x8, m->apicid_8111, 0x8);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x9, m->apicid_8111, 0x9);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xc, m->apicid_8111, 0xc);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xd, m->apicid_8111, 0xd);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xe, m->apicid_8111, 0xe);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xf, m->apicid_8111, 0xf);
+//??? What
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_0, ((sysconf.sbdn+1)<<2)|3, m->apicid_8111, 0x13);
+
+ // Onboard AMD USB
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, (0<<2)|3, m->apicid_8111, 0x13);
+
+ //Slot 3 PCI 32
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, (5<<2)|i, m->apicid_8111, 0x10 + (1+i)%4); //16
+ }
+
+
+ // Slot 4 PCI 32
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, (4<<2)|i, m->apicid_8111, 0x10 + (0+i)%4); //16
+ }
+
+
+ // Slot 1 PCI-X 133/100/66
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132_2, (1<<2)|i, m->apicid_8132_2, (0+i)%4); //
+ }
+
+
+ //Slot 2 PCI-X 133/100/66
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132_1, (1<<2)|i, m->apicid_8132_1, (1+i)%4); //25
+ }
+
+ j = 0;
+
+ for(i=1; i< sysconf.hc_possible_num; i++) {
+ if(!(sysconf.pci1234[i] & 0x1) ) continue;
+ int ii;
+ int jj;
+ device_t dev;
+ struct resource *res;
+ switch(sysconf.hcid[i]) {
+ case 1:
+ case 3:
+ dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j], 1));
+ if (dev) {
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ if (res) {
+ for(jj=0; jj<4; jj++) {
+ //Slot 1 PCI-X 133/100/66
+ for(ii=0;ii<4;ii++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132a[j][1], (jj<<2)|ii, m->apicid_8132a[j][0], (jj+ii)%4); //
+ }
+ }
+ }
+ }
+
+ dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j]+1, 1));
+ if (dev) {
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ if (res) {
+ for(jj=0; jj<4; jj++) {
+ //Slot 2 PCI-X 133/100/66
+ for(ii=0;ii<4;ii++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132a[j][2], (jj<<2)|ii, m->apicid_8132a[j][1], (jj+ii)%4); //25
+ }
+ }
+ }
+ }
+
+ break;
+ case 2:
+
+ // Slot AGP
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8151[j][1], 0x0, m->apicid_8111, 0x11);
+ break;
+ }
+
+ j++;
+ }
+
+
+
+ /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
+ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x0);
+ smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x1);
+ /* There is no extension information... */
+
+ /* Compute the checksums */
+ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
+ mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
+ printk_debug("Wrote the mp table end at: %p - %p\n",
+ mc, smp_next_mpe_entry(mc));
+ return smp_next_mpe_entry(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+ void *v;
+ v = smp_write_floating_table(addr);
+ return (unsigned long)smp_write_config_table(v);
+}
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/resourcemap.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/resourcemap.c 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,281 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+
+static void setup_mb_resource_map(void)
+{
+ static const unsigned int register_values[] = {
+ /* Careful set limit registers before base registers which contain the enables */
+ /* DRAM Limit i Registers
+ * F1:0x44 i = 0
+ * F1:0x4C i = 1
+ * F1:0x54 i = 2
+ * F1:0x5C i = 3
+ * F1:0x64 i = 4
+ * F1:0x6C i = 5
+ * F1:0x74 i = 6
+ * F1:0x7C i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 3] Reserved
+ * [10: 8] Interleave select
+ * specifies the values of A[14:12] to use with interleave enable.
+ * [15:11] Reserved
+ * [31:16] DRAM Limit Address i Bits 39-24
+ * This field defines the upper address bits of a 40 bit address
+ * that define the end of the DRAM region.
+ */
+// PCI_ADDR(CBB, CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CAR_FAM10
+ PCI_ADDR(CBB, CDB, 1, 0x4C), 0x0000f8f8, 0x00000001,
+ PCI_ADDR(CBB, CDB, 1, 0x54), 0x0000f8f8, 0x00000002,
+ PCI_ADDR(CBB, CDB, 1, 0x5C), 0x0000f8f8, 0x00000003,
+ PCI_ADDR(CBB, CDB, 1, 0x64), 0x0000f8f8, 0x00000004,
+ PCI_ADDR(CBB, CDB, 1, 0x6C), 0x0000f8f8, 0x00000005,
+ PCI_ADDR(CBB, CDB, 1, 0x74), 0x0000f8f8, 0x00000006,
+ PCI_ADDR(CBB, CDB, 1, 0x7C), 0x0000f8f8, 0x00000007,
+ /* DRAM Base i Registers
+ * F1:0x40 i = 0
+ * F1:0x48 i = 1
+ * F1:0x50 i = 2
+ * F1:0x58 i = 3
+ * F1:0x60 i = 4
+ * F1:0x68 i = 5
+ * F1:0x70 i = 6
+ * F1:0x78 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 7: 2] Reserved
+ * [10: 8] Interleave Enable
+ * 000 = No interleave
+ * 001 = Interleave on A[12] (2 nodes)
+ * 010 = reserved
+ * 011 = Interleave on A[12] and A[14] (4 nodes)
+ * 100 = reserved
+ * 101 = reserved
+ * 110 = reserved
+ * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+ * [15:11] Reserved
+ * [13:16] DRAM Base Address i Bits 39-24
+ * This field defines the upper address bits of a 40-bit address
+ * that define the start of the DRAM region.
+ */
+// PCI_ADDR(CBB, CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CAR_FAM10
+ PCI_ADDR(CBB, CDB, 1, 0x48), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0x50), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0x58), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0x60), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0x68), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0x70), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0x78), 0x0000f8fc, 0x00000000,
+
+ /* Memory-Mapped I/O Limit i Registers
+ * F1:0x84 i = 0
+ * F1:0x8C i = 1
+ * F1:0x94 i = 2
+ * F1:0x9C i = 3
+ * F1:0xA4 i = 4
+ * F1:0xAC i = 5
+ * F1:0xB4 i = 6
+ * F1:0xBC i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = Reserved
+ * [ 6: 6] Reserved
+ * [ 7: 7] Non-Posted
+ * 0 = CPU writes may be posted
+ * 1 = CPU writes must be non-posted
+ * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+ * This field defines the upp adddress bits of a 40-bit address that
+ * defines the end of a memory-mapped I/O region n
+ */
+ PCI_ADDR(CBB, CDB, 1, 0x84), 0x00000048, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0x8C), 0x00000048, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0x94), 0x00000048, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0x9C), 0x00000048, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0xA4), 0x00000048, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0xAC), 0x00000048, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0xB4), 0x00000048, 0x00000000,
+// PCI_ADDR(CBB, CDB, 1, 0xBC), 0x00000048, 0x00ffff00,
+
+ /* Memory-Mapped I/O Base i Registers
+ * F1:0x80 i = 0
+ * F1:0x88 i = 1
+ * F1:0x90 i = 2
+ * F1:0x98 i = 3
+ * F1:0xA0 i = 4
+ * F1:0xA8 i = 5
+ * F1:0xB0 i = 6
+ * F1:0xB8 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Cpu Disable
+ * 0 = Cpu can use this I/O range
+ * 1 = Cpu requests do not use this I/O range
+ * [ 3: 3] Lock
+ * 0 = base/limit registers i are read/write
+ * 1 = base/limit registers i are read-only
+ * [ 7: 4] Reserved
+ * [31: 8] Memory-Mapped I/O Base Address i (39-16)
+ * This field defines the upper address bits of a 40bit address
+ * that defines the start of memory-mapped I/O region i
+ */
+ PCI_ADDR(CBB, CDB, 1, 0x80), 0x000000f0, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0x88), 0x000000f0, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0x90), 0x000000f0, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0x98), 0x000000f0, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0xA0), 0x000000f0, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0xA8), 0x000000f0, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0xB0), 0x000000f0, 0x00000000,
+// PCI_ADDR(CBB, CDB, 1, 0xB8), 0x000000f0, 0x00fc0003,
+
+ /* PCI I/O Limit i Registers
+ * F1:0xC4 i = 0
+ * F1:0xCC i = 1
+ * F1:0xD4 i = 2
+ * F1:0xDC i = 3
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = reserved
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Limit Address i
+ * This field defines the end of PCI I/O region n
+ * [31:25] Reserved
+ */
+// PCI_ADDR(CBB, CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000,
+ PCI_ADDR(CBB, CDB, 1, 0xCC), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0xD4), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0xDC), 0xFE000FC8, 0x00000000,
+
+ /* PCI I/O Base i Registers
+ * F1:0xC0 i = 0
+ * F1:0xC8 i = 1
+ * F1:0xD0 i = 2
+ * F1:0xD8 i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 3: 2] Reserved
+ * [ 4: 4] VGA Enable
+ * 0 = VGA matches Disabled
+ * 1 = matches all address < 64K and where A[9:0] is in the
+ * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
+ * [ 5: 5] ISA Enable
+ * 0 = ISA matches Disabled
+ * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+ * from matching agains this base/limit pair
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Base i
+ * This field defines the start of PCI I/O region n
+ * [31:25] Reserved
+ */
+// PCI_ADDR(CBB, CDB, 1, 0xC0), 0xFE000FCC, 0x00000003,
+ PCI_ADDR(CBB, CDB, 1, 0xC8), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0xD0), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0xD8), 0xFE000FCC, 0x00000000,
+
+ /* Config Base and Limit i Registers
+ * F1:0xE0 i = 0
+ * F1:0xE4 i = 1
+ * F1:0xE8 i = 2
+ * F1:0xEC i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Device Number Compare Enable
+ * 0 = The ranges are based on bus number
+ * 1 = The ranges are ranges of devices on bus 0
+ * [ 3: 3] Reserved
+ * [ 6: 4] Destination Node
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 7] Reserved
+ * [ 9: 8] Destination Link
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 - Reserved
+ * [15:10] Reserved
+ * [23:16] Bus Number Base i
+ * This field defines the lowest bus number in configuration region i
+ * [31:24] Bus Number Limit i
+ * This field defines the highest bus number in configuration regin i
+ */
+// PCI_ADDR(CBB, CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0
+ PCI_ADDR(CBB, CDB, 1, 0xE4), 0x0000FC88, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0xE8), 0x0000FC88, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0xEC), 0x0000FC88, 0x00000000,
+ };
+
+ int max;
+ max = sizeof(register_values)/sizeof(register_values[0]);
+ setup_resource_map(register_values, max);
+}
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/spd_addr.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/spd_addr.h 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,194 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/**
+ * This file defines the SPD addresses for the mainboard. Must be included in
+ * cache_as_ram_auto.c
+ */
+
+#define RC00 0
+#define RC01 1
+#define RC02 2
+#define RC03 3
+#define RC04 4
+#define RC05 5
+#define RC06 6
+#define RC07 7
+#define RC08 8
+#define RC09 9
+#define RC10 10
+#define RC11 11
+#define RC12 12
+#define RC13 13
+#define RC14 14
+#define RC15 15
+#define RC16 16
+#define RC17 17
+#define RC18 18
+#define RC19 19
+#define RC20 20
+#define RC21 21
+#define RC22 22
+#define RC23 23
+#define RC24 24
+#define RC25 25
+#define RC26 26
+#define RC27 27
+#define RC28 28
+#define RC29 29
+#define RC30 30
+#define RC31 31
+
+#define RC32 32
+#define RC33 33
+#define RC34 34
+#define RC35 35
+#define RC36 36
+#define RC37 37
+#define RC38 38
+#define RC39 39
+#define RC40 40
+#define RC41 41
+#define RC42 42
+#define RC43 43
+#define RC44 44
+#define RC45 45
+#define RC46 46
+#define RC47 47
+#define RC48 48
+#define RC49 49
+#define RC50 50
+#define RC51 51
+#define RC52 52
+#define RC53 53
+#define RC54 54
+#define RC55 55
+#define RC56 56
+#define RC57 57
+#define RC58 58
+#define RC59 59
+#define RC60 60
+#define RC61 61
+#define RC62 62
+#define RC63 63
+
+
+#define DIMM0 0x50
+#define DIMM1 0x51
+#define DIMM2 0x52
+#define DIMM3 0x53
+#define DIMM4 0x54
+#define DIMM5 0x55
+#define DIMM6 0x56
+#define DIMM7 0x57
+
+
+static const u8 spd_addr[] = {
+ //first node
+ RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+#if CONFIG_MAX_PHYSICAL_CPUS > 1
+ //second node
+ RC01, DIMM0, DIMM2, DIMM4, DIMM6, DIMM1, DIMM3, DIMM5, DIMM7,
+#endif
+#if CONFIG_MAX_PHYSICAL_CPUS > 2
+ // third node
+ RC02, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ // forth node
+ RC03, DIMM0, DIMM2, DIMM4, DIMM6, DIMM1, DIMM3, DIMM5, DIMM7,
+#endif
+#if CONFIG_MAX_PHYSICAL_CPUS > 4
+ RC04, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC05, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+#endif
+#if CONFIG_MAX_PHYSICAL_CPUS > 6
+ RC06, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC07, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+#endif
+#if CONFIG_MAX_PHYSICAL_CPUS > 8
+ RC08, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC09, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC10, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC11, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+#endif
+#if CONFIG_MAX_PHYSICAL_CPUS > 12
+ RC12, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC13, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC14, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC15, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+#endif
+#if CONFIG_MAX_PHYSICAL_CPUS > 16
+ RC16, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC17, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC18, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC19, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+#endif
+#if CONFIG_MAX_PHYSICAL_CPUS > 20
+ RC20, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC21, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC22, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC23, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+#endif
+#if CONFIG_MAX_PHYSICAL_CPUS > 24
+ RC24, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC25, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC26, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC27, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC28, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC29, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC30, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC31, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+#endif
+#if CONFIG_MAX_PHYSICAL_CPUS > 32
+ RC32, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC33, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC34, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC35, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC36, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC37, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC38, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC39, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC40, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC41, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC42, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC43, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC44, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC45, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC46, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC47, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+#endif
+#if CONFIG_MAX_PHYSICAL_CPUS > 48
+ RC48, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC49, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC50, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC51, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC52, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC53, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC54, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC55, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC56, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC57, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC58, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC59, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC60, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC61, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC62, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+ RC63, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+#endif
+};
+
Index: LinuxBIOSv2/targets/amd/serengeti_cheetah_fam10/Config.lb
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/targets/amd/serengeti_cheetah_fam10/Config.lb 2007-12-12 16:38:38.000000000 -0700
@@ -0,0 +1,67 @@
+##
+## This file is part of the LinuxBIOS project.
+##
+## Copyright (C) 2007 Advanced Micro Devices, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+# Sample config file for
+# the amd cheetah_fam10
+# This will make a target directory of ./serengeti_cheetah_fam10
+
+target serengeti_cheetah_fam10
+mainboard amd/serengeti_cheetah_fam10
+# Request this level of debugging output
+ option DEFAULT_CONSOLE_LOGLEVEL=11
+# At a maximum only compile in this level of debugging
+ option MAXIMUM_CONSOLE_LOGLEVEL=11
+
+# Cheetah Family 10
+#romimage "normal"
+# 1MB ROM
+# option ROM_SIZE = 0x100000
+# option USE_FAILOVER_IMAGE=0
+# option USE_FALLBACK_IMAGE=0
+# option ROM_IMAGE_SIZE=0x20000
+# option ROM_IMAGE_SIZE=0x30000
+# option XIP_ROM_SIZE=0x40000
+# option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
+# payload ../payload.elf
+#end
+
+romimage "fallback"
+ option USE_FAILOVER_IMAGE=0
+ option USE_FALLBACK_IMAGE=1
+# option ROM_IMAGE_SIZE=0x13800
+# option ROM_IMAGE_SIZE=0x19800
+ option ROM_IMAGE_SIZE=0x3f000
+# option ROM_IMAGE_SIZE=0x15800
+ option XIP_ROM_SIZE=0x40000
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
+ payload ../payload.elf
+end
+
+romimage "failover"
+ option USE_FAILOVER_IMAGE=1
+ option USE_FALLBACK_IMAGE=0
+ option ROM_IMAGE_SIZE=FAILOVER_SIZE
+ option XIP_ROM_SIZE=FAILOVER_SIZE
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Failover"
+end
+
+#buildrom ./amd-cheetah-fam10.rom ROM_SIZE "normal" "fallback" "failover"
+buildrom ./amd-cheetah-fam10.rom ROM_SIZE "fallback" "failover"
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amdfam10_util.asl
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amdfam10_util.asl 2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,329 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+//
+
+//AMD FAM10 util for BUSB and res range
+
+Scope (_SB)
+{
+
+ Name (OSTB, Ones)
+ Method (OSTP, 0, NotSerialized)
+ {
+ If (LEqual (^OSTB, Ones))
+ {
+ Store (0x00, ^OSTB)
+ }
+
+ Return (^OSTB)
+ }
+
+ Method (SEQL, 2, Serialized)
+ {
+ Store (SizeOf (Arg0), Local0)
+ Store (SizeOf (Arg1), Local1)
+ If (LNot (LEqual (Local0, Local1))) { Return (Zero) }
+
+ Name (BUF0, Buffer (Local0) {})
+ Store (Arg0, BUF0)
+ Name (BUF1, Buffer (Local0) {})
+ Store (Arg1, BUF1)
+ Store (Zero, Local2)
+ While (LLess (Local2, Local0))
+ {
+ Store (DerefOf (Index (BUF0, Local2)), Local3)
+ Store (DerefOf (Index (BUF1, Local2)), Local4)
+ If (LNot (LEqual (Local3, Local4))) { Return (Zero) }
+
+ Increment (Local2)
+ }
+
+ Return (One)
+ }
+
+
+ Method (DADD, 2, NotSerialized)
+ {
+ Store( Arg1, Local0)
+ Store( Arg0, Local1)
+ Add( ShiftLeft(Local1,16), Local0, Local0)
+ Return (Local0)
+ }
+
+
+ Method (GHCE, 1, NotSerialized) // check if the HC enabled
+ {
+ Store (DerefOf (Index (_SB.PCI0.HCLK, Arg0)), Local1)
+ if(LEqual ( And(Local1, 0x01), 0x01)) { Return (0x0F) }
+ Else { Return (0x00) }
+ }
+
+ Method (GHCN, 1, NotSerialized) // get the node num for the HC
+ {
+ Store (0x00, Local0)
+ Store (DerefOf (Index (_SB.PCI0.HCLK, Arg0)), Local1)
+ Store (ShiftRight( And (Local1, 0xfc), 0x02), Local0)
+ Return (Local0)
+ }
+
+ Method (GHCL, 1, NotSerialized) // get the link num on node for the HC
+ {
+ Store (0x00, Local0)
+ Store (DerefOf (Index (_SB.PCI0.HCLK, Arg0)), Local1)
+ Store (ShiftRight( And (Local1, 0x700), 0x08), Local0)
+ Return (Local0)
+ }
+
+ Method (GHCD, 2, NotSerialized) // get the unit id base for the HT device in HC
+ {
+ Store (0x00, Local0)
+ Store (DerefOf (Index (_SB.PCI0.HCDN, Arg0)), Local1)
+ Store (Arg1, Local2) // Arg1 could be 3, 2, 1, 0
+ Multiply (Local2, 0x08, Local2) // change to 24, 16, 8, 0
+ Store (And (ShiftRight( Local1, Local2), 0xff), Local0)
+ Return (Local0)
+ }
+
+ Method (GBUS, 2, NotSerialized)
+ {
+ Store (0x00, Local0)
+ While (LLess (Local0, 0x20)) // 32 ht links
+ {
+ Store (DerefOf (Index (_SB.PCI0.BUSN, Local0)), Local1)
+ If (LEqual (And (Local1, 0x03), 0x03))
+ {
+ If (LEqual (Arg0, ShiftRight (And (Local1, 0xfc), 0x02)))
+ {
+ If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local1, 0x0700), 0x08))))
+ {
+ Return (ShiftRight (And (Local1, 0x000FF000), 0x0c))
+ }
+ }
+ }
+
+ Increment (Local0)
+ }
+
+ Return (0x00)
+ }
+
+ Method (GWBN, 2, NotSerialized)
+ {
+ Name (BUF0, ResourceTemplate ()
+ {
+ WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
+ 0x0000, // Address Space Granularity
+ 0x0000, // Address Range Minimum
+ 0x0000, // Address Range Maximum
+ 0x0000, // Address Translation Offset
+ 0x0000,,,)
+ })
+ CreateWordField (BUF0, 0x08, BMIN)
+ CreateWordField (BUF0, 0x0A, BMAX)
+ CreateWordField (BUF0, 0x0E, BLEN)
+ Store (0x00, Local0)
+ While (LLess (Local0, 0x20))
+ {
+ Store (DerefOf (Index (_SB.PCI0.BUSN, Local0)), Local1)
+ If (LEqual (And (Local1, 0x03), 0x03))
+ {
+ If (LEqual (Arg0, ShiftRight (And (Local1, 0xfc), 0x02)))
+ {
+ If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local1, 0x0700), 0x08))))
+ {
+ Store (ShiftRight (And (Local1, 0x000FF000), 0x0c), BMIN)
+ Store (ShiftRight (Local1, 0x14), BMAX)
+ Subtract (BMAX, BMIN, BLEN)
+ Increment (BLEN)
+ Return (RTAG (BUF0))
+ }
+ }
+ }
+
+ Increment (Local0)
+ }
+
+ Return (RTAG (BUF0))
+ }
+
+ Method (GMEM, 2, NotSerialized)
+ {
+ Name (BUF0, ResourceTemplate ()
+ {
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite,
+ 0x00000000, // Address Space Granularity
+ 0x00000000, // Address Range Minimum
+ 0x00000000, // Address Range Maximum
+ 0x00000000, // Address Translation Offset
+ 0x00000000,,,
+ , AddressRangeMemory, TypeStatic)
+ })
+ CreateDWordField (BUF0, 0x0A, MMIN)
+ CreateDWordField (BUF0, 0x0E, MMAX)
+ CreateDWordField (BUF0, 0x16, MLEN)
+ Store (0x00, Local0)
+ Store (0x00, Local4)
+ Store (0x00, Local3)
+ While (LLess (Local0, 0x80)) // 0x20 links * 2(mem, prefmem ) *2 ( base, limit )
+ {
+ Store (DerefOf (Index (_SB.PCI0.MMIO, Local0)), Local1)
+ Increment (Local0)
+ Store (DerefOf (Index (_SB.PCI0.MMIO, Local0)), Local2)
+ If (LEqual (And (Local1, 0x03), 0x03))
+ {
+ If (LEqual (Arg0, And (Local2, 0x3f)))
+ {
+ If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local1, 0x70), 0x04))))
+ {
+ Store (ShiftLeft (And (Local1, 0xFFFFFF00), 0x08), MMIN)
+ Store (ShiftLeft (And (Local2, 0xFFFFFF00), 0x08), MMAX)
+ Or (MMAX, 0xFFFF, MMAX)
+ Subtract (MMAX, MMIN, MLEN)
+
+ If (Local4)
+ {
+ Concatenate (RTAG (BUF0), Local3, Local5)
+ Store (Local5, Local3)
+ }
+ Else
+ {
+ If (LOr (LAnd (LEqual (Arg1, 0xFF), LEqual (Arg0, 0x00)), LEqual (Arg1, _SB.PCI0.SBLK)))
+ {
+ Store (_SB.PCI0.TOM1, MMIN)
+ Subtract (MMAX, MMIN, MLEN)
+ Increment (MLEN)
+ }
+
+ Store (RTAG (BUF0), Local3)
+ }
+
+ Increment (Local4)
+ }
+ }
+ }
+
+ Increment (Local0)
+ }
+
+ If (LNot (Local4))
+ {
+ Store (BUF0, Local3)
+ }
+
+ Return (Local3)
+ }
+
+ Method (GIOR, 2, NotSerialized)
+ {
+ Name (BUF0, ResourceTemplate ()
+ {
+ DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x00000000, // Address Space Granularity
+ 0x00000000, // Address Range Minimum
+ 0x00000000, // Address Range Maximum
+ 0x00000000, // Address Translation Offset
+ 0x00000000,,,
+ , TypeStatic)
+ })
+ CreateDWordField (BUF0, 0x0A, PMIN)
+ CreateDWordField (BUF0, 0x0E, PMAX)
+ CreateDWordField (BUF0, 0x16, PLEN)
+ Store (0x00, Local0)
+ Store (0x00, Local4)
+ Store (0x00, Local3)
+ While (LLess (Local0, 0x40)) // 0x20 ht links * 2 ( base, limit)
+ {
+ Store (DerefOf (Index (_SB.PCI0.PCIO, Local0)), Local1)
+ Increment (Local0)
+ Store (DerefOf (Index (_SB.PCI0.PCIO, Local0)), Local2)
+ If (LEqual (And (Local1, 0x03), 0x03))
+ {
+ If (LEqual (Arg0, And (Local2, 0x3f)))
+ {
+ If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local1, 0x70), 0x04))))
+ {
+ Store (And (Local1, 0x01FFF000), PMIN)
+ Store (And (Local2, 0x01FFF000), PMAX)
+ Or (PMAX, 0x0FFF, PMAX)
+ Subtract (PMAX, PMIN, PLEN)
+ Increment (PLEN)
+
+ If (Local4)
+ {
+ Concatenate (RTAG (BUF0), Local3, Local5)
+ Store (Local5, Local3)
+ }
+ Else
+ {
+ If (LGreater (PMAX, PMIN))
+ {
+ If (LOr (LAnd (LEqual (Arg1, 0xFF), LEqual (Arg0, 0x00)), LEqual (Arg1, _SB.PCI0.SBLK)))
+ {
+ Store (0x0D00, PMIN)
+ Subtract (PMAX, PMIN, PLEN)
+ Increment (PLEN)
+ }
+
+ Store (RTAG (BUF0), Local3)
+ Increment (Local4)
+ }
+
+ If (And (Local1, 0x10))
+ {
+ Store (0x03B0, PMIN)
+ Store (0x03DF, PMAX)
+ Store (0x30, PLEN)
+ If (Local4)
+ {
+ Concatenate (RTAG (BUF0), Local3, Local5)
+ Store (Local5, Local3)
+ }
+ Else
+ {
+ Store (RTAG (BUF0), Local3)
+ }
+ }
+ }
+
+ Increment (Local4)
+ }
+ }
+ }
+
+ Increment (Local0)
+ }
+
+ If (LNot (Local4))
+ {
+ Store (RTAG (BUF0), Local3)
+ }
+
+ Return (Local3)
+ }
+
+ Method (RTAG, 1, NotSerialized)
+ {
+ Store (Arg0, Local0)
+ Store (SizeOf (Local0), Local1)
+ Subtract (Local1, 0x02, Local1)
+ Multiply (Local1, 0x08, Local1)
+ CreateField (Local0, 0x00, Local1, RETB)
+ Store (RETB, Local2)
+ Return (Local2)
+ }
+}
\ No newline at end of file
14 Dec
14 Dec
12:21 a.m.
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hello Marc,
Just a quick note due to total -ENOTIME.
+unsigned long acpi_fill_mcfg(unsigned long current) +{ + /* Just a dummy */ + return current;
You don't need this, the acpi_fill_mcfg is a weak symbol. if it does not exists everything compiles fine.
Oh just one thing. I wanted to get the S3 working with K8 revE. I have written some experimental implementation, but memory after resume is unusable. I'm just triggering the bits DCL_ESR | DCL_SRS to exit self-refresh but no luck. I'm working-out all known revE errata. Is there a way how to get access to some more advance documentation? Is really sufficient just to trigger those to bits instead of InitRAM? Do I need to deal with the DisDqsHys even when from resume (of course I tried both). The PME registers should respond to S3 sb generated cycle. Anyway this can wait and it is totally lowprio, but still I'm curios ;)
Thanks, Rudolf
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFHYb5r3J9wPJqZRNURAic8AKCEj7H2+VLR9bgRLQjAHT2xsi2QpQCdF3/Z
lRPnycGrpcKhTAXuOFnhE1Q=
=Ic13
-----END PGP SIGNATURE-----
12:47 a.m.
Rudolf Marek wrote: unsigned long acpi_fill_mcfg(unsigned long current)
+{
- /* Just a dummy */
- return current;
You don't need this, the acpi_fill_mcfg is a weak symbol. if it does not exists everything compiles fine.
OK thanks, I will be updating APCI tables in the near future..... I have a bit to learn in that area as well.
Oh just one thing. I wanted to get the S3 working with K8 revE. I have written some experimental implementation, but memory after resume is unusable. I'm just triggering the bits DCL_ESR | DCL_SRS to exit self-refresh but no luck. I'm working-out all known revE errata. Is there a way how to get access to some more advance documentation? Is really sufficient just to trigger those to bits instead of InitRAM? Do I need to deal with the DisDqsHys even when from resume (of course I tried both). The PME registers should respond to S3 sb generated cycle. Anyway this can wait and it is totally lowprio, but still I'm curios ;)
I have the same BKDG that you should have and I don't see any additional documents that might have more information. I will let you know if I come across anything.
Marc
--
Marc Jones
Senior Firmware Engineer
(970) 226-9684 Office
mailto:Marc.Jones@amd.com
http://www.amd.com/embeddedprocessors
19 Dec
19 Dec
2:50 a.m.
Marc Jones wrote:
Serengeti_Cheetah_fam10 mainboard. Marc
Acked-by: Ronald G. Minnich rminnich@gmail.com
r3016
Thanks, Marc
--
Marc Jones
Senior Firmware Engineer
(970) 226-9684 Office
mailto:Marc.Jones@amd.com
http://www.amd.com/embeddedprocessors
6183
days inactive
6189
days old
3 comments
2 participants
participants (2)
-
Marc Jones -
Rudolf Marek