regarding edk2 payload to boot to uefi aware OS

[ritul guru]

Hi,
In earlier coreboot, there was a tianocore payload which has 1.
CorebootPayload 2. UEFIPayload
I used to boot with CorebootPayload to UEFI aware OS.
I see, now it is edk2 payload, is CorebootPayload deprecated? and building
alone uefipayload.fd is enough to boot to UEFI aware OS with coreboot BIOS?

*Thanks & RegardsRitul Guru+91-9916513186*

[Nicholas Chin]

Hi Ritul,

Yes, CorebootPayload was deprecated and UEFIPayload should be used
going forward. It should be able to boot a UEFI OS with coreboot.
Tianocore was renamed to edk2, as you probably noticed.

Cheers,
Nicholas Chin

On Mon, Feb 6, 2023 at 10:58 AM ritul guru  wrote:
> Hi,
> In earlier coreboot, there was a tianocore payload which has 1. CorebootPayload 2. UEFIPayload
> I used to boot with CorebootPayload to UEFI aware OS.
> I see, now it is edk2 payload, is CorebootPayload deprecated? and building alone uefipayload.fd is enough to boot to UEFI aware OS with coreboot BIOS?
>
> Thanks & Regards
> Ritul Guru
> [phone]
> _______________________________________________
> coreboot mailing list -- [e-mail]
> To unsubscribe send an email to [e-mail]

[ritul guru]

Thanks, for clarification.
Any idea why CPU_TIMER_LIB_ENABLE is set to false when building
uefipayload.fd for coreboot?

With edk2 payload, I am observing above boot failure on NVMe SSD boot to
UEFI ubuntuOS,

Gcd services are DXE services, so we can not add spaces into GCD in FSP or
in coreboot.
is it some known failure, or something wrong in my platform?

buildhob: base = 0x100000000, size = 0x39E300000, type = 0x0
14. 000000049E300000 - 000000049FFFFFFF [02]
Create smbios table gUniversalPayloadSmbiosTableGuid guid hob
Find CbMemTable Id 0x534D4254, base 5CEE9000, size 0x8000
Detected Smbios Table at 0x5CEE9000
Create ACPI table gUniversalPayloadAcpiTableGuid guid hob
Find CbMemTable Id 0x41435049, base 5CEF1000, size 0x24000
Detected ACPI Table at 0x5CEF1000
Rsdp at 0x5CEF1000
Rsdt at 0x5CEF1030, Xsdt at 0x5CEF10E0
Found Fadt in Rsdt
Found MM config address in Rsdt
PmCtrl  Reg 0x404
PmTimer Reg 0x408
Reset   Reg 0xCF9
Reset   Value 0x6
PmEvt   Reg 0x400
PmGpeEn Reg 0x424
PcieBaseAddr 0xE0000000
PcieBaseSize 0x10000000
Create acpi board info guid hob
Building ResourceDescriptorHobs for reserved memory:
0. 0000000000000000 - 0000000000000FFF [10]
buildhob: base = 0x0, size = 0x1000, type = 0x5
1. 0000000000001000 - 000000000009FFFF [01]
2. 00000000000A0000 - 00000000000FFFFF [02]
buildhob: base = 0xA0000, size = 0x60000, type = 0x5
3. 0000000000100000 - 0000000001FFFFFF [01]
4. 0000000002000000 - 0000000002181FFF [02]
buildhob: base = 0x2000000, size = 0x182000, type = 0x5
5. 0000000002182000 - 00000000557FFFFF [01]
6. 0000000055800000 - 000000005CEE8FFF [02]
buildhob: base = 0x55800000, size = 0x76E9000, type = 0x5
7. 000000005CEE9000 - 000000005DFFFFFF [10]
buildhob: base = 0x5CEE9000, size = 0x1117000, type = 0x5
8. 000000005E000000 - 000000005FFFFFFF [02]
buildhob: base = 0x5E000000, size = 0x2000000, type = 0x5
9. 00000000E0000000 - 00000000EFFFFFFF [02]
buildhob: base = 0xE0000000, size = 0x10000000, type = 0x1
10. 00000000FEC10000 - 00000000FEC10FFF [02]
buildhob: base = 0xFEC10000, size = 0x1000, type = 0x1
11. 00000000FEDC2000 - 00000000FEDC5FFF [02]
buildhob: base = 0xFEDC2000, size = 0x4000, type = 0x1
12. 00000000FEDC9000 - 00000000FEDC9FFF [02]
buildhob: base = 0xFEDC9000, size = 0x1000, type = 0x1
13. 0000000100000000 - 000000049E2FFFFF [01]
14. 000000049E300000 - 000000049FFFFFFF [02]
buildhob: base = 0x49E300000, size = 0x1D00000, type = 0x5
Building hob to restrict memory resorces to below 4G.
DxeCoreEntryPoint = 0x4DD7649
PayloadEntry: AddressBits=48 5LevelPaging=0 1GPage=1
Pml5=1 Pml4=512 Pdp=512 TotalPage=513
HandOffToDxeCore() Stack Base: 0x4DAE000, Stack Size: 0x20000
ASSERT [DxeCore]
/home//coreboot_feb1_edk2/payloads/external/edk2/workspace/tianocore/MdeModulePkg/Core/Dxe/Gcd/Gcd.c(2379):
Found

*Thanks & RegardsRitul Guru+91-9916513186*

On Mon, Feb 6, 2023 at 11:34 PM Nicholas Chin  wrote:
> Hi Ritul,
>
> Yes, CorebootPayload was deprecated and UEFIPayload should be used
> going forward. It should be able to boot a UEFI OS with coreboot.
> Tianocore was renamed to edk2, as you probably noticed.
>
> Cheers,
> Nicholas Chin
>
> On Mon, Feb 6, 2023 at 10:58 AM ritul guru  wrote:
> > Hi,
> > In earlier coreboot, there was a tianocore payload which has 1.
>
> CorebootPayload 2. UEFIPayload
> > I used to boot with CorebootPayload to UEFI aware OS.
> > I see, now it is edk2 payload, is CorebootPayload deprecated? and
>
> building alone uefipayload.fd is enough to boot to UEFI aware OS with
> coreboot BIOS?
> > Thanks & Regards
> > Ritul Guru
> > [phone]
> > _______________________________________________
> > coreboot mailing list -- [e-mail]
> > To unsubscribe send an email to [e-mail]