Hi
On 05/30/2017 12:36 AM, Urs Ritzmann wrote:
Is there a way to disable Quad IO Read(0xEB) from the flash descriptor region?
please try clearing bits 3 (Quad I/O Read Enable) and 2 (Quad Output Read Enable) at 0x108 offset.
Andrey
Hi
On Tuesday, 30. May 2017 17:47, Andrey Petrov wrote:
please try clearing bits 3 (Quad I/O Read Enable) and 2 (Quad Output Read Enable) at 0x108 offset.
Thanks, it successfully disables Quad I/O and Quad Outpout Read Enable. Unfortunately, I still get strange offsets after a couple thousand read commands. I contacted Dediprog, perhaps something with the SFDP is wrong.
What flash type were you emulating? I require a 1.8 Volt device with >= 128Mbit size.
BR Urs