Since my hard drive literally screamed at me today, I figured it is time to send my current raw flashrom diff to the list. Some parts of it are already acked, some are just reminders something is wrong.
Carl-Daniel
Index: util/flashrom/flash.h =================================================================== --- util/flashrom/flash.h (Revision 2802) +++ util/flashrom/flash.h (Arbeitskopie) @@ -68,8 +68,31 @@ #define AT_29C040A 0xA4 #define AT_29C020 0xDA
+#define EON_ID 0x1C +/* EN25 chips are SPI, first byte of device id is memory type, + second byte of device id is log(bitsize)-9 */ +#define EN_25B05 0x2010 /* 2^19 kbit or 2^16 kByte */ +#define EN_25B10 0x2011 +#define EN_25B20 0x2012 +#define EN_25B40 0x2013 +#define EN_25B80 0x2014 +#define EN_25B16 0x2015 +#define EN_25B32 0x2016 + #define MX_ID 0xC2 /* Macronix (MX) */ #define MX_29F002 0xB0 +/* MX25L chips are SPI, first byte of device id is memory type, + second byte of device id is log(bitsize)-9 */ +#define MX_25L512 0x2010 /* 2^19 kbit or 2^16 kByte */ +#define MX_25L1005 0x2011 +#define MX_25L2005 0x2012 +#define MX_25L4005 0x2013 /* MX25L4005{,A} */ +#define MX_25L8005 0x2014 +#define MX_25L1605 0x2015 /* MX25L1605{,A,D} */ +#define MX_25L3205 0x2016 /* MX25L3205{,A} */ +#define MX_25L6405 0x2017 /* MX25L3205{,D} */ +#define MX_25L1635D 0x2415 +#define MX_25L3235D 0x2416
#define SHARP_ID 0xB0 /* Sharp */ #define SHARP_LHF00L04 0xCF Index: util/flashrom/en29f002a.c =================================================================== --- util/flashrom/en29f002a.c (Revision 0) +++ util/flashrom/en29f002a.c (Revision 0) @@ -0,0 +1,65 @@ +/* + EN29F512 has 1C,21 + EN29F010 has 1C,20 + EN29F040A has 1C,04 + EN29LV010 has 1C,6E and uses short F0 reset sequence + EN29LV040(A) has 1C,4F and uses short F0 reset sequence + */ +int probe_en29f512(struct flashchip *flash) +{ + volatile uint8_t *bios = flash->virtual_memory; + uint8_t id1, id2; + + *(volatile uint8_t *)(bios + 0x555) = 0xAA; + *(volatile uint8_t *)(bios + 0x2AA) = 0x55; + *(volatile uint8_t *)(bios + 0x555) = 0x90; + + myusec_delay(10); + + id1 = *(volatile uint8_t *)(bios + 0x100); + id2 = *(volatile uint8_t *)(bios + 0x101); + + /* exit by writing F0 anywhere? or the code below */ + *(volatile uint8_t *)(bios + 0x555) = 0xAA; + *(volatile uint8_t *)(bios + 0x2AA) = 0x55; + *(volatile uint8_t *)(bios + 0x555) = 0xF0; + + printf_debug("%s: id1 0x%x, id2 0x%x\n", __FUNCTION__, id1, id2); + + if (id1 == flash->manufacture_id && id2 == flash->model_id) + return 1; + + return 0; +} + +/* + EN29F002AT has 1C,92 + EN29F002AB has 1C,97 + */ +int probe_en29f002a(struct flashchip *flash) +{ + volatile uint8_t *bios = flash->virtual_memory; + uint8_t id1, id2; + + *(volatile uint8_t *)(bios + 0x555) = 0xAA; + *(volatile uint8_t *)(bios + 0xAAA) = 0x55; + *(volatile uint8_t *)(bios + 0x555) = 0x90; + + myusec_delay(10); + + id1 = *(volatile uint8_t *)(bios + 0x100); + id2 = *(volatile uint8_t *)(bios + 0x101); + + /* exit by writing F0 anywhere? or the code below */ + *(volatile uint8_t *)(bios + 0x555) = 0xAA; + *(volatile uint8_t *)(bios + 0xAAA) = 0x55; + *(volatile uint8_t *)(bios + 0x555) = 0xF0; + + printf_debug("%s: id1 0x%x, id2 0x%x\n", __FUNCTION__, id1, id2); + + if (id1 == flash->manufacture_id && id2 == flash->model_id) + return 1; + + return 0; +} + Index: util/flashrom/chipset_enable.c =================================================================== --- util/flashrom/chipset_enable.c (Revision 2802) +++ util/flashrom/chipset_enable.c (Arbeitskopie) @@ -381,7 +381,7 @@
/* dump_pci_device(dev); */
- /* Set the 4MB enable bit bit */ + /* Set the 0-4 MB enable bits */ byte = pci_read_byte(dev, 0x88); byte |= 0xff; /* 256K */ pci_write_byte(dev, 0x88, byte); @@ -389,7 +389,7 @@ byte |= 0xff; /* 1M */ pci_write_byte(dev, 0x8c, byte); word = pci_read_word(dev, 0x90); - word |= 0x7fff; /* 15M */ + word |= 0x7fff; /* 16M */ pci_write_word(dev, 0x90, word);
old = pci_read_byte(dev, 0x6d); Index: util/flashrom/board_enable.c =================================================================== --- util/flashrom/board_enable.c (Revision 2802) +++ util/flashrom/board_enable.c (Arbeitskopie) @@ -4,6 +4,7 @@ * Copyright (C) 2005-2007 coresystems GmbH stepan@coresystems.de * Copyright (C) 2006 Uwe Hermann uwe@hermann-uwe.de * Copyright (C) 2007 Luc Verhaegen libv@skynet.be + * Copyright (C) 2007 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -29,6 +30,104 @@ #include <string.h> #include "flash.h"
+/* Generic Super I/O helper functions */ +uint8_t regval(uint16_t port, uint8_t reg) +{ + outb(reg, port); + return inb(port + 1); +} + +void regwrite(uint16_t port, uint8_t reg, uint8_t val) +{ + outb(reg, port); + outb(val, port + 1); +} + +/* Helper functions for most recent ITE IT87xx Super I/O chips */ +#define CHIP_ID_BYTE1_REG 0x20 +#define CHIP_ID_BYTE2_REG 0x21 +static void enter_conf_mode_ite(uint16_t port) +{ + outb(0x87, port); + outb(0x01, port); + outb(0x55, port); + if (port == 0x2e) + outb(0x55, port); + else + outb(0xaa, port); +} + +static void exit_conf_mode_ite(uint16_t port) +{ + regwrite(port, 0x02, 0x02); +} + +static uint16_t find_ite_serial_flash_port(uint16_t port) +{ + uint8_t tmp = 0; + uint16_t id, flashport = 0; + + enter_conf_mode_ite(port); + + id = regval(port, CHIP_ID_BYTE1_REG) << 8; + id |= regval(port, CHIP_ID_BYTE2_REG); + + /* TODO: Handle more IT87xx if they support flash translation */ + if (id == 0x8716) { + /* NOLDN, reg 0x24, mask out lowest bit (suspend) */ + tmp = regval(port, 0x24) & 0xFE; + printf("Serial flash segment 0x%08x-0x%08x %sabled\n", + 0xFFFE0000, 0xFFFFFFFF, (tmp & 1 << 1) ? "en" : "dis"); + printf("Serial flash segment 0x%08x-0x%08x %sabled\n", + 0x000E0000, 0x000FFFFF, (tmp & 1 << 1) ? "en" : "dis"); + printf("Serial flash segment 0x%08x-0x%08x %sabled\n", + 0xFFEE0000, 0xFFEFFFFF, (tmp & 1 << 2) ? "en" : "dis"); + printf("Serial flash segment 0x%08x-0x%08x %sabled\n", + 0xFFF80000, 0xFFFEFFFF, (tmp & 1 << 3) ? "en" : "dis"); + printf("LPC write to serial flash %sabled\n", + (tmp & 1 << 4) ? "en" : "dis"); + printf("serial flash pin %i\n", (tmp & 1 << 5) ? 87 : 29); + /* LDN 0x7, reg 0x64/0x65 */ + regwrite(port, 0x07, 0x7); + flashport = regval(port, 0x64) << 8; + flashport |= regval(port, 0x65); + } + exit_conf_mode_ite(port); + return flashport; +} + +static void it8716_serial_rdid(uint16_t port) +{ + uint8_t busy, data0, data1, data2; + do { + busy = inb(port) & 0x80; + } while (busy); + /* RDID */ + outb(0x9f, port + 1); + /* Start IO, 33MHz, 3 input bytes, 0 output bytes*/ + outb((0x5<<4)|(0x3<<2)|(0x0), port); + do { + busy = inb(port) & 0x80; + } while (busy); + data0 = inb(port + 5); + data1 = inb(port + 6); + data2 = inb(port + 7); + printf("RDID returned %02x %02x %02x\n", data0, data1, data2); + return; +} + +static int it87xx_probe_serial_flash(const char *name) +{ + uint16_t flashport; + flashport = find_ite_serial_flash_port(0x2e); + if (flashport) + it8716_serial_rdid(flashport); + flashport = find_ite_serial_flash_port(0x4e); + if (flashport) + it8716_serial_rdid(flashport); + return 0; +} + /* * Helper functions for many Winbond Super I/Os of the W836xx range. */ @@ -314,6 +413,8 @@ };
struct board_pciid_enable board_pciid_enables[] = { + {0x10de, 0x0360, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, + "gigabyte", "ga-m57sli", "GIGABYTE GA-M57SLI", it87xx_probe_serial_flash}, {0x1022, 0x7468, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, "iwill", "dk8_htx", "IWILL DK8-HTX", w83627hf_gpio24_raise}, {0x1022, 0x746B, 0x1022, 0x36C0, 0x0000, 0x0000, 0x0000, 0x0000,
-
Carl-Daniel Hailfinger