Patrick Georgi (patrick@georgi-clan.de) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1222
-gerrit
commit a5317c9b8b855419265bebfab1177e2a679d1760 Author: Sven Schnelle svens@stackframe.org Date: Mon Jun 25 21:35:45 2012 +0200
Supermicro X7DB8: Use autogeneration of mptable
And fix the wrong indenting of devicetree.cb while at it.
Change-Id: Idbb19fb5d7155f44675098e79920caf65191c239 Signed-off-by: Sven Schnelle svens@stackframe.org --- src/mainboard/supermicro/x7db8/Kconfig | 1 + src/mainboard/supermicro/x7db8/devicetree.cb | 184 ++++++++++++++++---------- 2 files changed, 115 insertions(+), 70 deletions(-)
diff --git a/src/mainboard/supermicro/x7db8/Kconfig b/src/mainboard/supermicro/x7db8/Kconfig index 5365f85..2e26c78 100644 --- a/src/mainboard/supermicro/x7db8/Kconfig +++ b/src/mainboard/supermicro/x7db8/Kconfig @@ -12,6 +12,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_MP_TABLE select HAVE_PIRQ_TABLE select DRIVERS_I2C_W83793 + select DRIVERS_GENERIC_IOAPIC
config MAINBOARD_DIR string diff --git a/src/mainboard/supermicro/x7db8/devicetree.cb b/src/mainboard/supermicro/x7db8/devicetree.cb index 66e5cfe..8949c54 100644 --- a/src/mainboard/supermicro/x7db8/devicetree.cb +++ b/src/mainboard/supermicro/x7db8/devicetree.cb @@ -33,22 +33,30 @@ chip northbridge/intel/i5000 subsystemid 0x15d9 0x2017 end
- device pci 02.0 on # PCIe bridge - device pci 00.0 on - device pci 00.0 on - device pci 00.0 on end - device pci 02.0 on end - end - device pci 02.0 on - device pci 00.0 on - device pci 02.0 on - device pci 00.0 on end # e1000 #1 - device pci 00.1 on end # e1000 #2 + device pci 02.0 on # PCI Express x8 Port 2-3 + ioapic_irq 8 INTA 0x10 + ioapic_irq 8 INTB 0x11 + ioapic_irq 8 INTC 0x12 + ioapic_irq 8 INTD 0x13 + device pci 00.0 on # PCI Express Upstream Port + device pci 00.0 on # PCI Express Downstream Port E1 + device pci 00.0 on # 6700PXH PCI Express-to-PCI Bridge A + ioapic_irq 8 INTA 0x11 + ioapic_irq 8 INTB 0x10 + ioapic_irq 8 INTC 0x11 + ioapic_irq 8 INTD 0x10 + # PCI slot + device pci 00.2 on # 6700PXH PCI Express-to-PCI Bridge B + # PCI slot + end + device pci 02.0 on # Adaptec U320 #1 + ioapic_irq 8 INTA 0x10 + end + device pci 02.1 on # Adaptec U320 #2 + ioapic_irq 8 INTB 0x11 end end - device pci 00.1 on end end - end device pci 00.1 on end device pci 00.3 on end end @@ -58,6 +66,31 @@ chip northbridge/intel/i5000 device pci 05.0 on end device pci 06.0 on end device pci 07.0 on end + device pci 00.3 on # PCI Express to PCI-X Bridge + ioapic_irq 9 INTA 3 + ioapic_irq 9 INTB 0 + ioapic_irq 9 INTC 1 + ioapic_irq 9 INTD 2 + # PCI-X Slot + end + end + + device pci 03.0 on + ioapic_irq 8 INTA 0x10 + end + device pci 04.0 on + ioapic_irq 8 INTA 0x10 + end + device pci 05.0 on + ioapic_irq 8 INTA 0x10 + end + device pci 06.0 on + ioapic_irq 8 INTA 0x10 + end + device pci 07.0 on + ioapic_irq 8 INTA 0x10 + end + device pci 10.0 on end # FBD device pci 10.1 on end # FBD device pci 10.2 on end # FBD @@ -71,68 +104,79 @@ chip northbridge/intel/i5000 register "pirq_e_h" = "0x80808080" register "sata_ports_implemented" = "0x3f"
- device pci 1c.0 on end # PCIe bridge - device pci 1d.0 on end # USB UHCI - device pci 1d.1 on end # USB UHCI - device pci 1d.2 on end # USB UHCI - device pci 1d.3 on end # USB UHCI - device pci 1d.7 on end # USB2 EHCI - device pci 1e.0 on - device pci 01.0 on - end - end + device pci 1c.0 on + ioapic_irq 8 INTA 0x14 + ioapic_irq 8 INTB 0x15 + ioapic_irq 8 INTC 0x16 + ioapic_irq 8 INTD 0x17 + end # PCIe bridge + device pci 1d.0 on + ioapic_irq 8 INTA 0x10 + end # USB UHCI + device pci 1d.1 on + ioapic_irq 8 INTB 0x11 + end # USB UHCI + device pci 1d.2 on + ioapic_irq 8 INTC 0x12 + end # USB UHCI + device pci 1d.3 on + ioapic_irq 8 INTD 0x13 + end # USB UHCI + device pci 1d.7 on end # USB2 EHCI + device pci 1e.0 on + device pci 01.0 on end + end
- device pci 1f.0 on # PCI-LPC bridge - subsystemid 0x15d9 0x2009 - chip superio/winbond/w83627hf - device pnp 2e.0 off end # FDC - device pnp 2e.1 on # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Serial Port 1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end + device pci 1f.0 on # PCI-LPC bridge + ioapic_irq 8 INTA 0x11 + subsystemid 0x15d9 0x2009 + chip superio/winbond/w83627hf + device pnp 2e.0 off end # FDC + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Serial Port 1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end
- device pnp 2e.3 off end - device pnp 2e.5 on # KBC - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 + device pnp 2e.3 off end + device pnp 2e.5 on # KBC + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end
+ device pnp 2e.6 off end # CIR + device pnp 2e.7 off end # Game port / MIDI + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 on end # GPIO3 + device pnp 2e.a on end # ACPI + device pnp 2e.b off end # HWMON end - - device pnp 2e.6 off end # CIR - device pnp 2e.7 off end # Game port / MIDI - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 on end # GPIO3 - device pnp 2e.a on end # ACPI - device pnp 2e.b off end # HWMON - end - end - device pci 1f.1 off end # IDE - device pci 1f.2 on end # SATA - device pci 1f.3 on - chip drivers/i2c/w83793 - register "mfc" = "0x28" - register "fanin" = "0x1f" - register "peci_agent_conf" = "0x33" - register "tcase0" = "0x5e" - register "tcase1" = "0x5e" - register "tcase2" = "0x5e" - register "tcase3" = "0x5e" - register "tr_enable" = "0x01" - register "critical_temperature" = "0x7f" - register "td1_fan_select" = "0x01" - register "td2_fan_select" = "0x01" - register "td3_fan_select" = "0x01" - register "td4_fan_select" = "0x01" - - device i2c 0x2f on end end - end # SMBUS + device pci 1f.1 off end # IDE + device pci 1f.2 on end # SATA + device pci 1f.3 on + chip drivers/i2c/w83793 + register "mfc" = "0x28" + register "fanin" = "0x1f" + register "peci_agent_conf" = "0x33" + register "tcase0" = "0x5e" + register "tcase1" = "0x5e" + register "tcase2" = "0x5e" + register "tcase3" = "0x5e" + register "tr_enable" = "0x01" + register "critical_temperature" = "0x7f" + register "td1_fan_select" = "0x01" + register "td2_fan_select" = "0x01" + register "td3_fan_select" = "0x01" + register "td4_fan_select" = "0x01" + device i2c 0x2f on end + end + end # SMBUS end end end
-
Patrick Georgi