Re: [coreboot] Not supported mobo, compile for a similar one?

[Myles Watson]

On Fri, Oct 2, 2009 at 7:40 AM, Knut Kujat  wrote:
> > Each Opteron (amdk8) has three links: 0,1,&2.  On this board the mcp55 is on
> > link 2.  For your board you at least need to know if the 8132 is on the same
> > link as the mcp55, or a different one.  After you get that right it
> > shouldn't be too hard to fix up the rest since the boards are so similar.
>
> THX, for ur reply!

No problem.  According to the manual, the 8132 is on a link attached
to a different processor, so you probably would get debug output from
the board with an unmodified h8dmr image.

Myles