Hi Stefan, I tested your patch in the hope that my Geode GX2 board started to work again. Unfortunatly it doesn`t. My board stopped working after your vsm loading patches in rev5471. The error after rev5471 was "hda: lost interrupt" . Now after rev5532 with your improve realmode api patch the board oopses.
I will not ack nor nack because i know to little about programming.
Thanks,Nils.
Last part of rev5532 + improve realmode api patch:
sizeram: sizem 0x200 setup_gx2_cache: enable for 524288 KB msr 0x00001808 will be set to 25fff002:11ffe000 MSR 0x10000026 is now 0x2dfbe040:0x400fffe0 Preparing for VSA... VSA: Real mode stub @00000600: 628 bytes Check CBFS header at fffeffe0 magic is 4f524243 Found CBFS header at fffeffe0 Check fallback/coreboot_ram CBFS: follow chain: fff00000 + 38 + 79ab + align -> fff07a00 Check fallback/payload CBFS: follow chain: fff07a00 + 38 + 11038 + align -> fff18a80 Check vsa Stage: loading vsa @ 0x60000 (57868 bytes), entry @ 0x60020 Stage: done loading. VSA: Buffer @00060000 *[0k]=ba VSA: Signature *[0x20-0x23] is b0:10:e6:80 Calling VSA module... oprom: INT# 0xd oprom: eax: 11ffe000 ebx: 80007800 ecx: 00001012 edx: 25fff002 oprom: ebp: 00000ff4 esp: 00000fec edi: 0000102d esi: 00000028 oprom: ip: 0647 cs: 6000 flags: 00000013 Oops, exception 13 while executing option rom Unexpected Exception: 13 @ 6000:00000647 - Halting Code: 0 eflags: 00000013 eax: 11ffe000 ebx: 80007800 ecx: 00001012 edx: 25fff002 edi: 0000102d esi: 00000028 ebp: 00000ff4 esp: 00000fec
Hey Nils,
can you confirm r5470 works with your board?
If so, could you send me a complete boot log with that revision, please?
Which board was that again?
Which VSM module are you using?
Stefan
On 5/8/10 11:15 PM, Nils wrote:
Hi Stefan, I tested your patch in the hope that my Geode GX2 board started to work again. Unfortunatly it doesn`t. My board stopped working after your vsm loading patches in rev5471. The error after rev5471 was "hda: lost interrupt" . Now after rev5532 with your improve realmode api patch the board oopses.
I will not ack nor nack because i know to little about programming.
Thanks,Nils.
Last part of rev5532 + improve realmode api patch:
sizeram: sizem 0x200 setup_gx2_cache: enable for 524288 KB msr 0x00001808 will be set to 25fff002:11ffe000 MSR 0x10000026 is now 0x2dfbe040:0x400fffe0 Preparing for VSA... VSA: Real mode stub @00000600: 628 bytes Check CBFS header at fffeffe0 magic is 4f524243 Found CBFS header at fffeffe0 Check fallback/coreboot_ram CBFS: follow chain: fff00000 + 38 + 79ab + align -> fff07a00 Check fallback/payload CBFS: follow chain: fff07a00 + 38 + 11038 + align -> fff18a80 Check vsa Stage: loading vsa @ 0x60000 (57868 bytes), entry @ 0x60020 Stage: done loading. VSA: Buffer @00060000 *[0k]=ba VSA: Signature *[0x20-0x23] is b0:10:e6:80 Calling VSA module... oprom: INT# 0xd oprom: eax: 11ffe000 ebx: 80007800 ecx: 00001012 edx: 25fff002 oprom: ebp: 00000ff4 esp: 00000fec edi: 0000102d esi: 00000028 oprom: ip: 0647 cs: 6000 flags: 00000013 Oops, exception 13 while executing option rom Unexpected Exception: 13 @ 6000:00000647 - Halting Code: 0 eflags: 00000013 eax: 11ffe000 ebx: 80007800 ecx: 00001012 edx: 25fff002 edi: 0000102d esi: 00000028 ebp: 00000ff4 esp: 00000fec
-
Nils -
Stefan Reinauer