Frank Vibrans III (frank.vibrans@amd.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/132
-gerrit
commit 425e6501bb65c1d24e737dbe01c70def9d739872 Author: efdesign98 efdesign98@gmail.com Date: Thu Aug 4 13:47:18 2011 -0600
AMD CIMx changes to support F14 RevC0 cpus
This change is associated with the AMD Family 14 rev C0 update. It is mostly warning fixes. It encompasses both the SB800 and SB900 southbridges.
Change-Id: I31ad13bb92509228b89921561c340c95e5136370 Signed-off-by: Frank Vibrans frank.vibrans@amd.com Signed-off-by: efdesign98 efdesign98@gmail.com --- src/vendorcode/amd/cimx/sb800/AMDSBLIB.h | 3 ++- src/vendorcode/amd/cimx/sb800/EC.c | 4 ++-- src/vendorcode/amd/cimx/sb800/SATA.c | 4 ++-- src/vendorcode/amd/cimx/sb800/SBTYPE.h | 8 ++++---- src/vendorcode/amd/cimx/sb900/Makefile.inc | 2 ++ 5 files changed, 12 insertions(+), 9 deletions(-)
diff --git a/src/vendorcode/amd/cimx/sb800/AMDSBLIB.h b/src/vendorcode/amd/cimx/sb800/AMDSBLIB.h index 83722d8..6c92227 100644 --- a/src/vendorcode/amd/cimx/sb800/AMDSBLIB.h +++ b/src/vendorcode/amd/cimx/sb800/AMDSBLIB.h @@ -113,5 +113,6 @@ unsigned int ReadIo32(IN unsigned short Address); void WriteIo8(IN unsigned short Address, IN unsigned char Data); void WriteIo16(IN unsigned short Address, IN unsigned short Data); void WriteIo32(IN unsigned short Address, IN unsigned int Data); -void CpuidRead(IN unsigned int CpuidFcnAddress, OUT CPUID_DATA *Value); +//void CpuidRead(IN unsigned int CpuidFcnAddress, OUT CPUID_DATA *Value); +void CpuidRead(unsigned int CpuidFcnAddress, CPUID_DATA *Value); unsigned char ReadNumberOfCpuCores(void); diff --git a/src/vendorcode/amd/cimx/sb800/EC.c b/src/vendorcode/amd/cimx/sb800/EC.c index 633d251..34f82bb 100644 --- a/src/vendorcode/amd/cimx/sb800/EC.c +++ b/src/vendorcode/amd/cimx/sb800/EC.c @@ -71,7 +71,7 @@ ecPowerOnInit ( RWEC8 (0x61, 0x00, (MailBoxPort & 0xFF)); //set LSB of Mailbox port RWEC8 (0x30, 0x00, 0x01); //;Enable Mailbox Registers Interface, bit0=1
- if ( pConfig->BuildParameters.EcKbd == CIMX_OPTION_ENABLED) { + if ( pConfig->BuildParameters.EcKbd == CIMX_ENABLED) { //Enable KBRST#, IRQ1 & IRQ12, GateA20 Function signal from IMC RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGD6, AccWidthUint8, ~BIT8, BIT0 + BIT1 + BIT2 + BIT3);
@@ -83,7 +83,7 @@ ecPowerOnInit ( RWEC8 (0x30, 0x00, 0x01); }
- if ( pConfig->BuildParameters.EcChannel0 == CIMX_OPTION_ENABLED) { + if ( pConfig->BuildParameters.EcChannel0 == CIMX_ENABLED) { //Logical device 0x03 RWEC8 (0x07, 0x00, 0x03); RWEC8 (0x60, 0x00, 0x00); diff --git a/src/vendorcode/amd/cimx/sb800/SATA.c b/src/vendorcode/amd/cimx/sb800/SATA.c index 1c0e7e6..1c59d08 100644 --- a/src/vendorcode/amd/cimx/sb800/SATA.c +++ b/src/vendorcode/amd/cimx/sb800/SATA.c @@ -470,7 +470,7 @@ sataInitAfterPciEnum (
if (((pConfig->SataClass) != NATIVE_IDE_MODE) && ((pConfig->SataClass) != LEGACY_IDE_MODE)) { // RIAD or AHCI - if ((pConfig->SATAMODE.SataMode.SataIdeCombinedMode) == CIMX_OPTION_DISABLED) { + if ((pConfig->SATAMODE.SataMode.SataIdeCombinedMode) == CIMX_DISABLED) { RWMEM ((ddBar5 + SB_SATA_BAR5_REG00), AccWidthUint8 | S3_SAVE, ~(BIT2 + BIT1 + BIT0), BIT2 + BIT0); RWMEM ((ddBar5 + SB_SATA_BAR5_REG0C), AccWidthUint8 | S3_SAVE, 0xC0, 0x3F); // RPR 8.10 Disabling CCC (Command Completion Coalescing) support. @@ -631,7 +631,7 @@ sataInitLatePost ( //Enable write access to pci header, pm capabilities RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, 0xff, BIT0);
-// if ((pConfig->SATAMODE.SataMode.SataIdeCombinedMode) == CIMX_OPTION_DISABLED) { +// if ((pConfig->SATAMODE.SataMode.SataIdeCombinedMode) == CIMX_DISABLED) { RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 1), AccWidthUint8 | S3_SAVE, ~BIT7, BIT7); // } sataBar5setting (pConfig, &ddBar5); diff --git a/src/vendorcode/amd/cimx/sb800/SBTYPE.h b/src/vendorcode/amd/cimx/sb800/SBTYPE.h index ea3e6f6..da6c43e 100644 --- a/src/vendorcode/amd/cimx/sb800/SBTYPE.h +++ b/src/vendorcode/amd/cimx/sb800/SBTYPE.h @@ -1093,13 +1093,13 @@ typedef unsigned int CIM_STATUS; #pragma pack (pop)
/** - * CIMX_OPTION_DISABLED - Define disable in module + * CIMX_DISABLED - Define disable in module */ -#define CIMX_OPTION_DISABLED 0 +#define CIMX_DISABLED 0 /** - * CIMX_OPTION_ENABLED - Define enable in module + * CIMX_ENABLED - Define enable in module */ -#define CIMX_OPTION_ENABLED 1 +#define CIMX_ENABLED 1
// mov al, code // out 80h, al diff --git a/src/vendorcode/amd/cimx/sb900/Makefile.inc b/src/vendorcode/amd/cimx/sb900/Makefile.inc index 76b610f..6d79739 100755 --- a/src/vendorcode/amd/cimx/sb900/Makefile.inc +++ b/src/vendorcode/amd/cimx/sb900/Makefile.inc @@ -20,6 +20,8 @@ # CIMX Root directory CIMX_ROOT = $(src)/vendorcode/amd/cimx
+#CIMX_INC = -I$(src)/southbridge/amd/cimx/sb900 +#CIMX_INC += -I$(src)/mainboard/$(MAINBOARDDIR) CIMX_INC = -I$(src)/mainboard/$(MAINBOARDDIR) CIMX_INC += -I$(src)/southbridge/amd/cimx/sb900 CIMX_INC += -I$(CIMX_ROOT)/sb900
-
Frank Vibrans III