Issue #325 has been reported by Francois Ollonois.
---------------------------------------- Bug #325: Asus P5QL-EM: NVIDIA card in PCIe X1 port not working https://ticket.coreboot.org/issues/325
* Author: Francois Ollonois * Status: New * Priority: Normal * Assignee: * Category: * Target version: ---------------------------------------- When using my nvidia geforce GT 710 in PCIe X1 slot the screen is not working after graphic driver is loaded. With nomodeset parameter it works but without driver I can't start Xorg. The same card in X16 slot works, but I want to use the X16 port on this board for a nvme adapter card. I discussed the problem with nouveau project and they consider some sort of DMA problem and found some differences between vendor firmware and coreboot that may cause the problems. They also mention some kernel parameters to work around this problem but even with this parameters the screen flickers when using Xorg. With original vendor firmware the card works in X1 port. I use this card: https://www.asus.com/Motherboards-Components/Graphics-Cards/ASUS/GT710-4H-SL...
Here is the link to the nouveau ticket. https://gitlab.freedesktop.org/drm/nouveau/-/issues/132
I will also add the kernel log and lcpci output and the cbmem output. And here are some information about the differences:
~~~ Coreboot: Latency: 0, Cache Line Size: 64 bytes Capabilities: [100 v1] Virtual Channel Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Vendor: Latency: 0, Cache Line Size: 32 bytes Capabilities: [100 v1] Virtual Channel Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 ~~~
The host bridge also has SERR+ on coreboot vs SERR- on vendor.
And the root ports actually have a lot of differences, including stuff like
~~~ Coreboot: Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s (ok), Width x0 (downgraded) TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Vendor: Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s (ok), Width x0 (downgraded) TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 10.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- ~~~
---Files-------------------------------- cbmem_p5ql-em.log (43.5 KB) kernel_log_X1.txt (56.9 KB) kernel_log_X1_nomodeset.txt (55.1 KB) kernel_log_X1_with_para.txt (57.3 KB) kernel_log_X16.txt (56.7 KB) lspci_coreboot_root2.txt (64.3 KB) lspci_vendor.txt (61.9 KB)
-
coreboot＠fe80.eu