-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
I sent this out twice, because the first one has been held up because I attached the intel PDF and it exceeded the max size. The link will take anyone there anyway. Sorry.. :D
flashrom output with -V <snip> - -bash-3.00# ./flashrom -f -r -V -c 28F320C3B test flashrom v0.9.0-r535 Found candidate at: 00000500-00000c68 Found coreboot table at 0x00000500. coreboot table found at 0x500. coreboot header(24) checksum: 30c4 table(1896) checksum: 3619 entries: 13 Vendor ID: Intel, part ID: SE7520JR22D Found chipset "Intel ICH5/ICH5R", enabling flash write... BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 OK.
Unknown vendor:board from coreboot table or -m option: Intel:SE7520JR22D
Calibrating delay loop... 1013M loops per second, 100 myus = 198 us. OK. No EEPROM/flash device found. Force read (-f -r -c) requested, forcing chip probe success: flashrom does not support a flash chip named '28F320C3B'. Run flashrom -L to view the hardware supported in this flashrom version. - -bash-3.00# </snip>
Technical information from Intel http://download.intel.com/support/motherboards/server/se7520jr2/sb/se7520jr2...
<snip> 3.4.11 BIOS Flash The BIOS supports the Intel® 28F320C3B flash part. The flash part is a 4-MB flash ROM with 2MB programmable. The flash ROM contains system initialization routines, setup utility, and runtime support routines. The exact layout is subject to change, as determined by Intel. A 128- KB block is available for storing OEM code (user binary) and custom logos. </snip>
Thanks in advance,
Joshua McDowell
On 20.05.2009 18:59, Joshua McDowell wrote:
flashrom output with -V
<snip> -bash-3.00# ./flashrom -f -r -V -c 28F320C3B test
Please run "flashrom -V" as Uwe requested. Adding any other parameters makes the output useless. Thanks.
Regards, Carl-Daniel
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
I mis-understood, I apologize..
<snip> bash-3.00# ./flashrom -V flashrom v0.9.0-r535 Found candidate at: 00000500-00000c68 Found coreboot table at 0x00000500. coreboot table found at 0x500. coreboot header(24) checksum: 30c4 table(1896) checksum: 3619 entries: 13 Vendor ID: Intel, part ID: SE7520JR22D Found chipset "Intel ICH5/ICH5R", enabling flash write... BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 OK.
Unknown vendor:board from coreboot table or -m option: Intel:SE7520JR22D
Calibrating delay loop... 1023M loops per second, 100 myus = 199 us. OK. Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0x7f, id2 0x45 Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F080B, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xff, id2 0xff Probing for ASD AE49F2008, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT25DF021, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25DF041A, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25DF081, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25DF161, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25DF321, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25DF321A, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25DF641, 8192 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25F512B, 64 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25FS010, 128 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25FS040, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT26DF041, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT26DF081A, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT26DF161, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT26DF161A, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT26F004, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT29C010A, 128 KB: probe_jedec: id1 0x7fdb, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT45CS1282, 16896 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT45DB011D, 128 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT45DB021D, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT45DB041D, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT45DB081D, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT45DB161D, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT45DB321C, 4224 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT45DB321D, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT45DB642D, 8192 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT49BV512, 64 KB: probe_jedec: id1 0x5d, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F002(N), 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A25L40P, 512 KB: 4b ID not supported on this SPI controller Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xff, id2 0xff Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xff, id2 0xff Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMIC A49LF040A, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L1005, 128 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L2005, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L4005, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L8005, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L1605, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L1635D, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L3205, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L3235D, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L6405, 8192 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L12805, 16384 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xff, id2 0xff Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xff, id2 0xff Probing for Macronix MX29LV040C, 512 KB: probe_29f002: id1 0xff, id2 0xff Probing for Numonyx M25PE10, 128 KB: spi_command called, but no SPI chipset/strapping detected Probing for Numonyx M25PE20, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for Numonyx M25PE40, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for Numonyx M25PE80, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for Numonyx M25PE16, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm25LV010, 128 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm25LV016B, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm25LV020, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm25LV040, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm25LV080B, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm25LV512, 64 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm39LV010, 128 KB: probe_jedec: id1 0x7fdb, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff Probing for Spansion S25FL016A, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for SST SST25VF016B, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for SST SST25VF032B, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for SST SST25VF040B, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for SST SST25VF040.REMS, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for SST SST25VF040B.REMS, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for SST SST25VF080B, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0xff, id2 0xff Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0x7fdb, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0x7fdb, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE020A, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0x7fdb, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0x5d, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0x7fdb, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF008A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0x7f, id2 0x45 Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0x7f, id2 0x45 Probing for ST M25P05-A, 64 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P10-A, 128 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P20, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P40, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P40-old, 512 KB: spi_command called, but no SPI chipset/strapping detected spi_command called, but no SPI chipset/strapping detected Probing for ST M25P80, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P16, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P32, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P64, 8192 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P128, 16384 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M29F002B, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29W010B, 128 KB: probe_jedec: id1 0x7fdb, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0x7f, id2 0x45 Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: probe_jedec: id1 0x7fdb, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C51001T, 128 KB: probe_jedec: id1 0x7fdb, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C51002T, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C51004T, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25x10, 128 KB: spi_command called, but no SPI chipset/strapping detected Probing for Winbond W25x20, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for Winbond W25x40, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for Winbond W25x80, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for Winbond W29C011, 128 KB: probe_jedec: id1 0x7fdb, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29EE011, 128 KB: === Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. === Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0xff, id2 0xff, id1 parity violation Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: vid 0xff, did 0xff Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: vid 0xff, did 0xff Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. spi_command called, but no SPI chipset/strapping detected Not unmapping zero size at (nil) Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. spi_command called, but no SPI chipset/strapping detected Not unmapping zero size at (nil) Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. spi_command called, but no SPI chipset/strapping detected Not unmapping zero size at (nil) Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. spi_command called, but no SPI chipset/strapping detected Not unmapping zero size at (nil) Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. spi_command called, but no SPI chipset/strapping detected Not unmapping zero size at (nil) Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. spi_command called, but no SPI chipset/strapping detected Not unmapping zero size at (nil) No EEPROM/flash device found. If you know which flash chip you have, and if this version of flashrom supports a similar flash chip, you can try to force read your chip. Run: flashrom -f -r -c similar_supported_flash_chip filename
Note: flashrom can never write when the flash chip isn't found automatically. - -bash-3.00# <snip>
Carl-Daniel Hailfinger wrote:
On 20.05.2009 18:59, Joshua McDowell wrote:
flashrom output with -V
<snip> -bash-3.00# ./flashrom -f -r -V -c 28F320C3B test
Please run "flashrom -V" as Uwe requested. Adding any other parameters makes the output useless. Thanks.
Regards, Carl-Daniel
On 20.05.2009 19:27, Joshua McDowell wrote:
I mis-understood, I apologize..
No need to apologize. You're responsive, so I won't complain ;-)
bash-3.00# ./flashrom -V flashrom v0.9.0-r535 Found candidate at: 00000500-00000c68 Found coreboot table at 0x00000500. coreboot table found at 0x500. coreboot header(24) checksum: 30c4 table(1896) checksum: 3619 entries: 13 Vendor ID: Intel, part ID: SE7520JR22D Found chipset "Intel ICH5/ICH5R", enabling flash write... BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 OK.
Unknown vendor:board from coreboot table or -m option: Intel:SE7520JR22D
It would be very interesting to get the coreboot/LinuxBIOS code for that board.
Probing for Winbond W49V002FA, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content [...]
The message above means we either have an incorrect probe sequence or the probe never reaches the chip...
No EEPROM/flash device found.
I think you already told us which chip this is. One of us will be able to figure out the probe sequence from the data sheet and add it to flashrom.
Regards, Carl-Daniel
-
Carl-Daniel Hailfinger -
Joshua McDowell