In case this helps my effort: lspci output for ASUS TUSI-M

[Keith Hui]

Superio is IT8705.

lspci -tvnn

-[0000:00]-+-00.0  Silicon Integrated Systems [SiS] 630 Host [1039:0630]
           +-00.1  Silicon Integrated Systems [SiS] 5513 [IDE] [1039:5513]
           +-01.0  Silicon Integrated Systems [SiS] SiS85C503/5513
(LPC Bridge) [1039:0018]
           +-01.1  Silicon Integrated Systems [SiS] SiS900 PCI Fast
Ethernet [1039:0900]
           +-01.2  Silicon Integrated Systems [SiS] USB 1.1 Controller
[1039:7001]
           +-01.3  Silicon Integrated Systems [SiS] USB 1.1 Controller
[1039:7001]
           +-02.0-[01]----00.0  Silicon Integrated Systems [SiS]
630/730 PCI/AGP VGA Display Adapter [1039:6300]
           -05.0  C-Media Electronics Inc CM8738 [13f6:0111]

lspci -vvnnxxx

00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 630 Host
[1039:0630] (rev 30)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
    Latency: 32
    Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=64M]
    Capabilities: [c0] AGP version 2.0
    	Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit-
FW- AGP3- Rate=x1,x2,x4
    	Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
    Kernel driver in use: agpgart-sis
    Kernel modules: sis-agp
00: 39 10 30 06 07 00 10 22 30 00 00 06 00 20 80 00
10: 00 00 00 ec 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 9e 00 c1 00 95 01 81 00 00 55 51 00 00 00 00 00
60: 2a 2a 00 83 00 00 00 00 00 00 e2 00 af 00 00 00
70: 07 9f 00 00 00 00 00 00 00 00 00 00 42 00 00 00
80: 21 ff 7f 1f 60 00 03 40 00 08 00 00 88 67 00 2a
90: 00 00 b1 1f 43 00 00 05 00 00 00 00 00 00 00 00
a0: 00 00 03 01 00 00 00 00 00 00 00 00 00 00 fe 01
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 02 00 20 00 07 02 00 1f 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:00.1 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513
[IDE] [1039:5513] (rev d0) (prog-if 80 [Master])
    Subsystem: ASUSTeK Computer Inc. Device [1043:80e1]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 128
    Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
    Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
    Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
    Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
    Region 4: I/O ports at d800 [size=16]
    Kernel driver in use: pata_sis
00: 39 10 13 55 07 00 00 00 d0 80 01 01 00 80 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 d8 00 00 00 00 00 00 00 00 00 00 43 10 e1 80
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 03 00 00 01 b3 00 00 23 07 e6 00 00 02 00 02
50: 00 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:01.0 ISA bridge [0601]: Silicon Integrated Systems [SiS]
SiS85C503/5513 (LPC Bridge) [1039:0018]
    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Kernel driver in use: sis630_smbus
    Kernel modules: i2c-sis630
00: 39 10 18 00 0f 00 00 02 00 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: f0 80 80 0a 05 20 3d 5c 10 00 00 00 11 30 04 01
50: 11 38 02 01 60 00 66 00 9c 04 12 00 d3 8b 38 00
60: 00 80 80 80 20 41 00 00 00 00 09 00 80 80 00 00
70: c0 00 f8 04 00 e4 00 00 00 00 00 00 03 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:01.1 Ethernet controller [0200]: Silicon Integrated Systems [SiS]
SiS900 PCI Fast Ethernet [1039:0900] (rev 84)
    Subsystem: ASUSTeK Computer Inc. Device [1043:80e1]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32 (13000ns min, 2750ns max)
    Interrupt: pin C routed to IRQ 10
    Region 0: I/O ports at d400 [size=256]
    Region 1: Memory at eb800000 (32-bit, non-prefetchable) [size=4K]
    [virtual] Expansion ROM at 20000000 [disabled] [size=128K]
    Capabilities: [40] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=160mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: sis900
    Kernel modules: sis900
00: 39 10 00 09 07 00 90 02 84 00 00 02 00 20 00 00
10: 01 d4 00 00 00 00 80 eb 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 e1 80
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 03 34 0b
40: 01 00 c2 fe 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:01.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB
1.1 Controller [1039:7001] (rev 07) (prog-if 10 [OHCI])
    Subsystem: Device [0039:7001]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32 (20000ns max), Cache Line Size: 32 bytes
    Interrupt: pin D routed to IRQ 5
    Region 0: Memory at eb000000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci_hcd
    Kernel modules: ohci-hcd
00: 39 10 01 70 17 00 80 02 07 10 03 0c 08 20 00 00
10: 00 00 00 eb 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 39 00 01 70
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 04 00 50
40: 00 00 00 00 54 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:01.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB
1.1 Controller [1039:7001] (rev 07) (prog-if 10 [OHCI])
    Subsystem: Device [0039:7000]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32 (20000ns max), Cache Line Size: 32 bytes
    Interrupt: pin D routed to IRQ 5
    Region 0: Memory at ea800000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci_hcd
    Kernel modules: ohci-hcd
00: 39 10 01 70 17 00 80 02 07 10 03 0c 08 20 00 00
10: 00 00 80 ea 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 39 00 00 70
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 04 00 50
40: 00 00 00 00 54 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] Virtual
PCI-to-PCI bridge (AGP) [1039:0001] (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 0000a000-0000afff
    Memory behind bridge: e9800000-e9ffffff
    Prefetchable memory behind bridge: f0000000-feafffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
    	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00: 39 10 01 00 07 00 00 00 00 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 a0 a0 00 20
20: 80 e9 f0 e9 00 f0 a0 fe 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:05.0 Multimedia audio controller [0401]: C-Media Electronics Inc
CM8738 [13f6:0111] (rev 10)
    Subsystem: ASUSTeK Computer Inc. Device [1043:80e1]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32 (500ns min, 6000ns max)
    Interrupt: pin A routed to IRQ 10
    Region 0: I/O ports at 9800 [size=256]
    Capabilities: [c0] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: C-Media PCI
    Kernel modules: snd-cmipci
00: f6 13 11 01 85 00 10 02 10 00 01 04 00 20 00 00
10: 01 98 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 e1 80
30: 00 00 00 00 c0 00 00 00 00 00 00 00 0a 01 02 18
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 06 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

01:00.0 VGA compatible controller [0300]: Silicon Integrated Systems
[SiS] 630/730 PCI/AGP VGA Display Adapter [1039:6300] (rev 21)
(prog-if 00 [VGA controller])
    Subsystem: ASUSTeK Computer Inc. Device [1043:80e1]
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin A routed to IRQ 11
    BIST result: 00
    Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
    Region 1: Memory at e9800000 (32-bit, non-prefetchable) [size=128K]
    Region 2: I/O ports at a800 [size=128]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: [40] Power Management version 1
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] AGP version 2.0
    	Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit-
FW- AGP3- Rate=x1,x2,x4
    	Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
    Kernel modules: sisfb
00: 39 10 00 63 03 00 b0 02 21 00 00 03 00 00 00 80
10: 08 00 00 f0 00 00 80 e9 01 a8 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 e1 80
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00
40: 01 50 01 06 00 00 00 00 00 00 00 00 00 00 00 00
50: 02 00 20 00 07 02 00 0f 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

flashrom -V (can't find the chip; nor do I find a flash protect option
in factory bios settings; it is a SST 39SF020A, soldered)

flashrom v0.9.1-r995 on Linux 2.6.33 (i686), built with libpci 3.1.3, GCC 4.3.3
No coreboot table found.
DMI string system-manufacturer: "System Manufacturer"
DMI string system-product-name: "System Name"
DMI string system-version: "System Version"
DMI string baseboard-manufacturer: "ASUSTeK Computer INC."
DMI string baseboard-product-name: "TUSI-M"
DMI string baseboard-version: "REV 1.xx"
DMI string chassis-type: "Tower"
Found ITE Super I/O, id 8705
Found chipset "SiS 630", enabling flash write... Found southbridge
1039:0018 at 00:01:0
OK.
This chipset supports the following protocols: Non-SPI.
SuperI/O ID 8705 is not on the controller list.
Calibrating delay loop... 695M loops per second, 10 myus = 10 us, 100
myus = 99 us, 1000 myus = 1005 us, 10000 myus = 10015 us, OK.
Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0xe4, id2
0xd5, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F016D, 2048 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for AMD Am29F040B, 512 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for AMD Am29LV040B, 512 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV081B, 1024 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT25DF021, 256 KB: skipped.
Probing for Atmel AT25DF041A, 512 KB: skipped.
Probing for Atmel AT25DF081, 1024 KB: skipped.
Probing for Atmel AT25DF161, 2048 KB: skipped.
Probing for Atmel AT25DF321, 4096 KB: skipped.
Probing for Atmel AT25DF321A, 4096 KB: skipped.
Probing for Atmel AT25DF641, 8192 KB: skipped.
Probing for Atmel AT25F512B, 64 KB: skipped.
Probing for Atmel AT25FS010, 128 KB: skipped.
Probing for Atmel AT25FS040, 512 KB: skipped.
Probing for Atmel AT26DF041, 512 KB: skipped.
Probing for Atmel AT26DF081A, 1024 KB: skipped.
Probing for Atmel AT26DF161, 2048 KB: skipped.
Probing for Atmel AT26DF161A, 2048 KB: skipped.
Probing for Atmel AT26F004, 512 KB: skipped.
Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0xef, id2
0xdb, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0xe4, id2
0xd5, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT45CS1282, 16896 KB: skipped.
Probing for Atmel AT45DB011D, 128 KB: skipped.
Probing for Atmel AT45DB021D, 256 KB: skipped.
Probing for Atmel AT45DB041D, 512 KB: skipped.
Probing for Atmel AT45DB081D, 1024 KB: skipped.
Probing for Atmel AT45DB161D, 2048 KB: skipped.
Probing for Atmel AT45DB321C, 4224 KB: skipped.
Probing for Atmel AT45DB321D, 4096 KB: skipped.
Probing for Atmel AT45DB642D, 8192 KB: skipped.
Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0xef, id2
0xdb, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A25L40PT, 512 KB: skipped.
Probing for AMIC A25L40PU, 512 KB: skipped.
Probing for AMIC A29002B, 256 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29002T, 256 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29040B, 512 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for Eon EN25B05, 64 KB: skipped.
Probing for Eon EN25B05T, 64 KB: skipped.
Probing for Eon EN25B10, 128 KB: skipped.
Probing for Eon EN25B10T, 128 KB: skipped.
Probing for Eon EN25B20, 256 KB: skipped.
Probing for Eon EN25B20T, 256 KB: skipped.
Probing for Eon EN25B40, 512 KB: skipped.
Probing for Eon EN25B40T, 512 KB: skipped.
Probing for Eon EN25B80, 1024 KB: skipped.
Probing for Eon EN25B80T, 1024 KB: skipped.
Probing for Eon EN25B16, 2048 KB: skipped.
Probing for Eon EN25B16T, 2048 KB: skipped.
Probing for Eon EN25B32, 4096 KB: skipped.
Probing for Eon EN25B32T, 4096 KB: skipped.
Probing for Eon EN25B64, 8192 KB: skipped.
Probing for Eon EN25B64T, 8192 KB: skipped.
Probing for Eon EN25D16, 2048 KB: skipped.
Probing for Eon EN25F05, 64 KB: skipped.
Probing for Eon EN25F10, 128 KB: skipped.
Probing for Eon EN25F20, 256 KB: skipped.
Probing for Eon EN25F40, 512 KB: skipped.
Probing for Eon EN25F80, 1024 KB: skipped.
Probing for Eon EN25F16, 2048 KB: skipped.
Probing for Eon EN25F32, 4096 KB: skipped.
Probing for Eon EN29F010, 128 KB: probe_jedec_common: id1 0xe4, id2
0xd5, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x20, id2 0x2d
Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x20, id2 0x2d
Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0xe4,
id2 0xd5, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0xe4,
id2 0xd5, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for Intel 28F004S5, 512 KB: probe_82802ab: id1 0x20, id2 0x98,
id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F004BV/BE-B, 512 KB: probe_82802ab: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F004BV/BE-T, 512 KB: probe_82802ab: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F400BV/CV/CE-B, 512 KB: probe_82802ab: id1 0x20,
id2 0x2d, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F400BV/CV/CE-T, 512 KB: probe_82802ab: id1 0x20,
id2 0x2d, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x20, id2 0x98,
id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Macronix MX25L512, 64 KB: skipped.
Probing for Macronix MX25L1005, 128 KB: skipped.
Probing for Macronix MX25L2005, 256 KB: skipped.
Probing for Macronix MX25L4005, 512 KB: skipped.
Probing for Macronix MX25L8005, 1024 KB: skipped.
Probing for Macronix MX25L1605, 2048 KB: skipped.
Probing for Macronix MX25L1635D, 2048 KB: skipped.
Probing for Macronix MX25L3205, 4096 KB: skipped.
Probing for Macronix MX25L3235D, 4096 KB: skipped.
Probing for Macronix MX25L6405, 8192 KB: skipped.
Probing for Macronix MX25L12805, 16384 KB: skipped.
Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe
timing information, using default 10mS/40uS. probe_jedec_common: id1
0xe4, id2 0xd5, id1 parity violation, id1 is normal flash content, id2
is normal flash content
Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe
timing information, using default 10mS/40uS. probe_jedec_common: id1
0xe4, id2 0xd5, id1 parity violation, id1 is normal flash content, id2
is normal flash content
Probing for Macronix MX29F002B, 256 KB: Chip lacks correct probe
timing information, using default 10mS/40uS. probe_jedec_common: id1
0x20, id2 0x98, id1 is normal flash content, id2 is normal flash
content
Probing for Macronix MX29F002T, 256 KB: Chip lacks correct probe
timing information, using default 10mS/40uS. probe_jedec_common: id1
0x20, id2 0x98, id1 is normal flash content, id2 is normal flash
content
Probing for Macronix MX29LV040, 512 KB: Chip lacks correct probe
timing information, using default 10mS/40uS. probe_jedec_common: id1
0x20, id2 0x98, id1 is normal flash content, id2 is normal flash
content
Probing for Numonyx M25PE10, 128 KB: skipped.
Probing for Numonyx M25PE20, 256 KB: skipped.
Probing for Numonyx M25PE40, 512 KB: skipped.
Probing for Numonyx M25PE80, 1024 KB: skipped.
Probing for Numonyx M25PE16, 2048 KB: skipped.
Probing for PMC Pm25LV010, 128 KB: skipped.
Probing for PMC Pm25LV016B, 2048 KB: skipped.
Probing for PMC Pm25LV020, 256 KB: skipped.
Probing for PMC Pm25LV040, 512 KB: skipped.
Probing for PMC Pm25LV080B, 1024 KB: skipped.
Probing for PMC Pm25LV512, 64 KB: skipped.
Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0xe4, id2
0xd5, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for PMC Pm39LV020, 256 KB: probe_jedec_common: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV040, 512 KB: probe_jedec_common: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for Sanyo LF25FW203A, 2048 KB: skipped.
Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Spansion S25FL008A, 1024 KB: skipped.
Probing for Spansion S25FL016A, 2048 KB: skipped.
Probing for SST SST25VF016B, 2048 KB: skipped.
Probing for SST SST25VF032B, 4096 KB: skipped.
Probing for SST SST25VF040.REMS, 512 KB: skipped.
Probing for SST SST25VF040B, 512 KB: skipped.
Probing for SST SST25VF040B.REMS, 512 KB: skipped.
Probing for SST SST25VF080B, 1024 KB: skipped.
Probing for SST SST28SF040A, 512 KB: probe_82802ab: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0xe4, id2
0xd5, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0xe4, id2
0xd5, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0xef, id2
0xdb, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0xe4, id2
0xd5, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0xef, id2
0xdb, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0xe4, id2
0xd5, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xe4,
id2 0xd5, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for ST M25P05-A, 64 KB: skipped.
Probing for ST M25P05.RES, 64 KB: skipped.
Probing for ST M25P10-A, 128 KB: skipped.
Probing for ST M25P10.RES, 128 KB: skipped.
Probing for ST M25P20, 256 KB: skipped.
Probing for ST M25P40, 512 KB: skipped.
Probing for ST M25P40-old, 512 KB: skipped.
Probing for ST M25P80, 1024 KB: skipped.
Probing for ST M25P16, 2048 KB: skipped.
Probing for ST M25P32, 4096 KB: skipped.
Probing for ST M25P64, 8192 KB: skipped.
Probing for ST M25P128, 16384 KB: skipped.
Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F040B, 512 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x20, id2 0x2d
Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0xe4, id2
0xd5, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0xef, id2
0xdb, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x20, id2 0x98,
id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x20, id2 0x98,
id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x20, id2 0x98,
id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x20, id2 0x98,
id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0xe4,
id2 0xd5, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0x20, id2
0x98, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W25Q80, 1024 KB: skipped.
Probing for Winbond W25Q16, 2048 KB: skipped.
Probing for Winbond W25Q32, 4096 KB: skipped.
Probing for Winbond W25x10, 128 KB: skipped.
Probing for Winbond W25x20, 256 KB: skipped.
Probing for Winbond W25x40, 512 KB: skipped.
Probing for Winbond W25x80, 1024 KB: skipped.
Probing for Winbond W25x16, 2048 KB: skipped.
Probing for Winbond W25x32, 4096 KB: skipped.
Probing for Winbond W25x64, 8192 KB: skipped.
Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0xe4, id2
0xd5, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond
W29EE011 because the probing sequence puts the AMIC A49LF040A in a
funky state. Use 'flashrom -c W29EE011' if you have a board with this
chip.
Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x20,
id2 0x98, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe
timing information, using default 10mS/40uS. probe_jedec_common: id1
0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2
is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct
probe timing information, using default 10mS/40uS. probe_jedec_common:
id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash
content
Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped.
Probing for EON unknown EON SPI chip, 0 KB: skipped.
Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped.
Probing for PMC unknown PMC SPI chip, 0 KB: skipped.
Probing for SST unknown SST SPI chip, 0 KB: skipped.
Probing for ST unknown ST SPI chip, 0 KB: skipped.
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped.
Probing for Generic unknown SPI chip (RDID), 0 KB: skipped.
Probing for Generic unknown SPI chip (REMS), 0 KB: skipped.
No EEPROM/flash device found.
If you know which flash chip you have, and if this version of flashrom
supports a similar flash chip, you can try to force read your chip. Run:
flashrom -f -r -c similar_supported_flash_chip filename

Note: flashrom can never write when the flash chip isn't found automatically.