[coreboot - Bug #446] Optiplex 9010 No Post - coreboot

22 May 2023


      Issue #446 has been updated by nolan p.
I also have this issue with my 7010 DT when building from `master` with blobs from my stock firmware (SMSC, GBE, ME, IFD). Both `SeaBIOS 1.16.2` and `edk2` from  MrChromebox and tianocore do not POST, though it seems like the fans will spin. My config is mostly default otherwise.
----------------------------------------
Bug #446: Optiplex 9010 No Post
https://ticket.coreboot.org/issues/446#change-1535
* Author: Aaron Burton
* Status: New
* Priority: Normal
* Category: board support
* Target version: 4.19
* Start date: 2023-01-09
----------------------------------------
Working with an Optiplex 9010 SFF, configured and built coreboot as usual against the Optiplex 9010 SFF platform in menuconfig. Left every other setting alone in terms of configuration. Included EC firmware, ME, GBE, IFD blobs from stock firmware into my build. Turns on with fans at normal speed (not full blast), but no keyboard illumination or display output. Using SeaBIOS 1.16.1. Any suggestions as to what may be going on? Thanks.
-- 
You have received this notification because you have either subscribed to it, or are involved in it.
To change your notification preferences, please click here: https://ticket.coreboot.org/my/account