-------- Weitergeleitete Nachricht -------- Betreff: Re: [coreboot] Re: Fwd: F2A85M IOMMU still not working for RIchland CPUS Datum: Thu, 18 Apr 2019 11:38:16 +0200 Von: Kinky Nekoboi kinky_nekoboi@nekoboi.moe An: Mike Banon mikebdp2@gmail.com
CPU : A8-6600K
[ 1.271514] microcode: CPU0: patch_level=0x0600110f [ 1.271521] microcode: CPU1: patch_level=0x0600110f [ 1.271532] microcode: CPU2: patch_level=0x0600110f [ 1.271538] microcode: CPU3: patch_level=0x0600110f [ 1.271583] microcode: Microcode Update Driver: v2.2. i compiled from the master tree, build on 16. April 2019
no microcode was included in that build.
next step i will try if, the problems occur again if i remove microcode updates via llinux kernel.
here is cbmem output as attachment
Am 18.04.19 um 06:08 schrieb Mike Banon:
IOMMU and system still booting without linux kernel level microcode
Am 18.04.19 um 11:38 schrieb Kinky Nekoboi:
Thank you, Nekoboi. If I understand it correctly: you haven't changed anything at coreboot or its' configuration, but your IOMMU suddenly started to work? ;-) (unknown what got it working?) Also, please could you make almost the same coreboot build, with the only difference is these microcodes installed by the unofficial patch: http://dangerousprototypes.com/docs/Lenovo_G505S_hacking#AMD_microcode_updat... , and then try it again with the same Linux to see if it's still working. With this patch applied, the microcode level should be 0x0600111f (...1f instead of ...0f) to confirm the successful installation.
On Thu, Apr 18, 2019 at 1:35 PM Kinky Nekoboi kinky_nekoboi@nekoboi.moe wrote: