FW: About the boot steps of the coreboot-V4

[She, Kerry]

Hello, Rock
> -----Original Message-----
> From: Cui Lei [mailto:[e-mail]]
> Sent: Friday, December 16, 2011 5:04 PM
> To: She, Kerry
> Cc: [e-mail]
> Subject: Re: [coreboot] About the boot steps of the coreboot-V4
>
> Hi, Kerry
>
> Thank you for your reply. I find after __protected_start the execution
> will go to the fpu_start (in the fpu_enable.inc), then go to the
> cache_as_ram. Now I have a new problem, on my mainboard , there are

more
> than 2minutes delay between __protected_start and __fpu_start, but on
> another mainboard(I just change the romsip code in order to run), it

is
> ok. If I move the fpu_start code to the entry32.inc, the delay will be
> after the __fpu_star

What platform do you use?
Can you provide some information about the mainboard, chipset and rom
chip,
With more information in detail, Maybe somebody else can assist.
thanks
> BRs,
> Rock.
> > Hello, Rock
> >
> > You may need to have a look at the crt0.S,
> > Take amd/persimmon as an example:
> > #include "config.h"
> >   #include "src/arch/x86/init/prologue.inc"
> >   #include "src/cpu/x86/32bit/entry32.inc"
> >   #include "src/cpu/x86/fpu_enable.inc"
> >   #include "src/cpu/amd/agesa/cache_as_ram.inc"
> >   #include "mainboard/amd/persimmon/romstage.inc"
> > ~
> >
> > "build/romstage/crt0.S"
> >
> > But I think it's better to learn coreboot by playing with it
> > on a mainboard than just reading the code.
> > thanks
> > > -----Original Message-----
> > > From: coreboot-bounces+kerry.she=[e-mail]
> >
> > [mailto:coreboot-
> > > bounces+kerry.she=[e-mail]] On Behalf Of Rock Cui
> > > Sent: Wednesday, December 07, 2011 1:19 PM
> > > To: [e-mail]
> > > Subject: [coreboot] About the boot steps of the coreboot-V4
> > >
> > > Hi all,
> > > I'm learnning the coreboot v4 source code. But when I read the file
> > > entry32.inc, I don't know where the execution will jmp to after the
> > > __protected_start.
> > > I need help.
> > >
> > > BRs,
> > >
> > > Rock.