Author: uwe Date: Tue Sep 21 01:41:37 2010 New Revision: 5820 URL: https://tracker.coreboot.org/trac/coreboot/changeset/5820
Log: A number of cleanups for 440BX raminit code.
Resolves a number of TODOs items within, and clarified a number of other TODOs.
Change register_values[] from long to u8 (byte). For what we are doing this is sufficient and makes it only 1/4 the size.
Remove a hard-coding of SDRAMC register that is redundant and now incorrect, now that SDRAMC is conditioned on SDRAMPWR_4DIMM Kconfig and set through register_values[]. This fixes all boards with 3 DIMM slots (e.g. ASUS P2B, A-Trend ATC-6220).
RPS registers are now set in runtime code; remove it from register_values[] table.
Bring DUMPNORTH() back. The code it refers to is still there.
Move #define of NB up so the DUMPNORTH() macro can use it.
Signed-off-by: Keith Hui buurin@gmail.com Acked-by: Uwe Hermann uwe@hermann-uwe.de
Modified: trunk/src/northbridge/intel/i440bx/raminit.c
Modified: trunk/src/northbridge/intel/i440bx/raminit.c ============================================================================== --- trunk/src/northbridge/intel/i440bx/raminit.c Sun Sep 19 23:12:05 2010 (r5819) +++ trunk/src/northbridge/intel/i440bx/raminit.c Tue Sep 21 01:41:37 2010 (r5820) @@ -29,15 +29,15 @@ Macros and definitions. -----------------------------------------------------------------------------*/
+#define NB PCI_DEV(0, 0, 0) + /* Debugging macros. */ #if CONFIG_DEBUG_RAM_SETUP #define PRINT_DEBUG(x) print_debug(x) #define PRINT_DEBUG_HEX8(x) print_debug_hex8(x) #define PRINT_DEBUG_HEX16(x) print_debug_hex16(x) #define PRINT_DEBUG_HEX32(x) print_debug_hex32(x) -// no dump_pci_device in src/northbridge/intel/i440bx -// #define DUMPNORTH() dump_pci_device(PCI_DEV(0, 0, 0)) -#define DUMPNORTH() +#define DUMPNORTH() dump_pci_device(NB) #else #define PRINT_DEBUG(x) #define PRINT_DEBUG_HEX8(x) @@ -46,8 +46,6 @@ #define DUMPNORTH() #endif
-#define NB PCI_DEV(0, 0, 0) - /* SDRAMC[7:5] - SDRAM Mode Select (SMS). */ #define RAM_COMMAND_NORMAL 0x0 #define RAM_COMMAND_NOP 0x1 @@ -70,7 +68,7 @@ };
/* Table format: register, bitmask, value. */ -static const long register_values[] = { +static const u8 register_values[] = { /* NBXCFG - NBX Configuration Register * 0x50 - 0x53 * @@ -131,9 +129,8 @@ * 0 = A7# is sampled asserted (i.e., 0) * [01:00] Reserved */ - // TODO NBXCFG + 0, 0x00, 0x0c, - // NBXCFG + 1, 0x00, 0xa0, + // TODO: Bit 15 should be 0 for multiprocessor boards NBXCFG + 1, 0x00, 0x80, NBXCFG + 2, 0x00, 0x00, NBXCFG + 3, 0x00, 0xff, @@ -143,7 +140,12 @@ * * [7:6] Reserved * [5:5] Module Mode Configuration (MMCONFIG) - * TODO + * The combination of SDRAMPWR and this bit (which is set by an + * external strapping option) determine how CKE works. + * SDRAMPWR MMCONFIG + * 0 0 = 3 DIMM, CKE0[5:0] driven + * X 1 = 3 DIMM, CKE0 only + * 1 0 = 4 DIMM, GCKE only * [4:3] DRAM Type (DT) * 00 = EDO * 01 = SDRAM @@ -252,12 +254,25 @@ * Sets the row page size for SDRAM. For EDO memory, the page * size is fixed at 2 KB. * - * [15:0] Page Size (PS) - * TODO - */ - // TODO - RPS + 0, 0x00, 0x00, - RPS + 1, 0x00, 0x00, + * Bits[1:0] Page Size + * 00 2 KB + * 01 4 KB + * 10 8 KB + * 11 Reserved + * + * RPS bits Corresponding DRB register + * [01:00] DRB[0], row 0 + * [03:02] DRB[1], row 1 + * [05:04] DRB[2], row 2 + * [07:06] DRB[3], row 3 + * [09:08] DRB[4], row 4 + * [11:10] DRB[5], row 5 + * [13:12] DRB[6], row 6 + * [15:14] DRB[7], row 7 + */ + /* Power on defaults to 2KB. Will be set later. */ + // RPS + 0, 0x00, 0x00, + // RPS + 1, 0x00, 0x00,
/* SDRAMC - SDRAM Control Register * 0x76 - 0x77 @@ -266,8 +281,7 @@ * [09:08] Idle/Pipeline DRAM Leadoff Timing (IPDLT) * 00 = Illegal * 01 = Add a clock delay to the lead-off clock count - * 10 = Illegal - * 11 = Illegal + * 1x = Illegal * [07:05] SDRAM Mode Select (SMS) * 000 = Normal SDRAM Operation (default) * 001 = NOP Command Enable @@ -296,7 +310,7 @@ #if CONFIG_SDRAMPWR_4DIMM SDRAMC + 0, 0x00, 0x10, /* The board has 4 DIMM slots. */ #else - SDRAMC + 0, 0x00, 0x00, /* The board has 3 DIMM slots.*/ + SDRAMC + 0, 0x00, 0x00, /* The board has 3 DIMM slots. */ #endif SDRAMC + 1, 0x00, 0x00,
@@ -304,7 +318,9 @@ * 0x78 - 0x79 * * [15:08] Banks per Row (BPR) - * TODO + * Each bit in this field corresponds to one row of the memory + * array. Bit 15 corresponds to row 7 while bit 8 corresponds + * to row 0. Bits for empty rows are "don't care". * 0 = 2 banks * 1 = 4 banks * [07:05] Reserved @@ -320,7 +336,6 @@ * 0111 = 32 clocks * 1xxx = Infinite (pages are not closed for idle condition) */ - // TODO PGPOL + 0, 0x00, 0x00, PGPOL + 1, 0x00, 0xff,
@@ -354,7 +369,6 @@ /* Enable normal refresh and the gated clock. */ // TODO: Only do this later? // PMCR, 0x00, 0x14, - // PMCR, 0x00, 0x10, PMCR, 0x00, 0x00,
/* Enable SCRR.SRRAEN and let BX choose the SRR. */ @@ -458,11 +472,11 @@ } }
- /* Algorithm bitmap for programming MBSC[39:0] and MBFS[23:0] + /* Algorithm bitmap for programming MBSC[39:0] and MBFS[23:0]. * - * 440BX datasheet says buffer frequency is independent from bus frequency - * and mismatch both ways are possible. This is how it is programmed - * in ASUS P2B-LS. + * The 440BX datasheet says buffer frequency is independent from bus + * frequency and mismatch both ways are possible. This is how it is + * programmed in the ASUS P2B-LS mainboard. * * There are four main conditions to check when programming DRAM buffer * frequency and strength: @@ -523,7 +537,8 @@ * +--------------------------------------- MAA[13:0],WEA#,SRASA#,SCASA# * MBSC[47:40] and MBFS[23] are reserved. * - * This algorithm is checked against P2B-LS factory BIOS. It has 4 DIMM slots. + * This algorithm is checked against the ASUS P2B-LS (which has + * 4 DIMM slots) factory BIOS. * Therefore it assumes a board with 4 slots, and will need testing * on boards with 3 DIMM slots. */ @@ -946,17 +961,14 @@ /* Setup DRAM row boundary registers and other attributes. */ set_dram_row_attributes();
- /* TODO: Set SDRAMC. */ - pci_write_config16(NB, SDRAMC, 0x0010); /* SDRAMPWR=1: 4 DIMM config */ - - /* TODO */ + /* Setup DRAM buffer strength. */ set_dram_buffer_strength();
/* TODO: Set PMCR? */ // pci_write_config8(NB, PMCR, 0x14); pci_write_config8(NB, PMCR, 0x10);
- /* TODO? */ + /* TODO: This is for EDO memory only. */ pci_write_config8(NB, DRAMT, 0x03); }
-
repository service