Eric,
If I disable the hard_reset, it can enumerate from link2 to link0. And the 8131 on link2 and 8151 on link0 all show out.
Maybe you can add MACRO to control reverse scan for AMKK8 northbridge. ( link2 then link0)
But it continues to reboot.
Regards
Yinghai Lu
Copying LinuxBIOS to ram. Jumping to LinuxBIOS. LinuxBIOS-1.1.42.0_Fallback Thu Sep 4 19:17:58 EDT 2003 booting... Finding PCI configuration type. PCI: Using configuration type 1 Enumerating: AMD K8 Northbridge Enumerating: AMD K8 Northbridge Enumerating: AMD K8 Enumerating: AMD K8 Enumerating buses...PCI: pci_scan_bus for bus 0 PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] ops PCI: 00:18.3 [1022/1103] enabled PCI: 00:19.0 [1022/1100] enabled PCI: 00:19.1 [1022/1101] enabled PCI: 00:19.2 [1022/1102] enabled PCI: 00:19.3 [1022/1103] ops PCI: 00:19.3 [1022/1103] enabled amdk8_scan_chains max: 0 starting... dev->links= 3 Hyper transport scan link: 2 max: 1 PCI: 01:01.0 [1022/7450] enabled next_unitid: 0003 PCI: 01:03.0 [1022/7460] enabled next_unitid: 0007 PCI: pci_scan_bus for bus 1 PCI: 01:01.0 [1022/7450] bus ops PCI: 01:01.0 [1022/7450] enabled PCI: 01:01.1 [1022/7451] ops PCI: 01:01.1 [1022/7451] enabled PCI: 01:02.0 [1022/7450] bus ops PCI: 01:02.0 [1022/7450] enabled PCI: 01:02.1 [1022/7451] ops PCI: 01:02.1 [1022/7451] enabled PCI: 01:03.0 [1022/7460] enabled PCI: 01:04.0 [1022/7468] bus ops PCI: 01:04.0 [1022/7468] enabled PCI: 01:04.1 [1022/7469] ops PCI: 01:04.1 [1022/7469] enabled PCI: 01:04.2 [1022/746a] enabled PCI: 01:04.3 [1022/746b] ops PCI: 01:04.3 [1022/746b] enabled PCI: 01:04.5 [1022/746d] enabled PCI: 01:04.6 [1022/746e] enabled PCI: pci_scan_bus for bus 2 PCI: 02:09.0 [14e4/16a7] ops PCI: 02:09.0 [14e4/16a7] enabled PCI: pci_scan_bus returning with max=02 PCI: pci_scan_bus for bus 3 PCI: pci_scan_bus returning with max=03 PCI: pci_scan_bus for bus 4 PCI: 04:00.0 [1022/7464] ops PCI: 04:00.0 [1022/7464] enabled PCI: 04:00.1 [1022/7464] ops PCI: 04:00.1 [1022/7464] enabled PCI: 04:00.2 [1022/7463] ops PCI: 04:00.2 [1022/7463] enabled PCI: 04:01.0 [1022/7462] enabled PCI: 04:0b.0 [1095/3114] ops PCI: 04:0b.0 [1095/3114] enabled PCI: 04:0c.0 [104c/8023] ops PCI: 04:0c.0 [104c/8023] enabled PCI: pci_scan_bus returning with max=04 PCI: pci_scan_bus returning with max=04 Hyper transport scan link: 2 new max: 0 Hypertransport scan link done Hyper transport scan link: 0 max: 5 PCI: 05:01.0 [1022/7454] enabled next_unitid: 0004 Hypertransport link capability not foundPCI: pci_scan_bus for bus 5 PCI: 05:00.0 [ffff/ffff/00ffff] has unknown header type ff, ignoring. PCI: 05:00.0 No device operations PCI: 05:01.0 [1022/7454] ops PCI: 05:01.0 [1022/7454] enabled PCI: 05:02.0 [1022/7455] bus ops PCI: 05:02.0 [1022/7455] enabled Copying LinuxBIOS to ram.
-----邮件原件----- 发件人: YhLu 发送时间: 2003年9月4日 10:48 收件人: ebiederman@lnxi.com 抄送: Stefan Reinauer; LinuxBIOS 主题: re: [COMMIT] Infrastructure Updates 4
Eric,
In the hypertransport_scan_chain, if the hard_reset is needed, it may produce problem.
Hard_reset call 8111 LPC (B1, D4, F0) reg 0x47 to trigger Reset.
But it is called before pci_scan_bus. At that time the 8111 LPC is still unkown.
Regards
YH
-----邮件原件----- 发件人: YhLu 发送时间: 2003年9月4日 10:30 收件人: 'ebiederman@lnxi.com' 抄送: Stefan Reinauer; LinuxBIOS 主题: Re: [COMMIT] Infrastructure Updates 4
I still have problems for s2885.
Amdk8_scan_bus for MC0 only from link0 to link2. link0 is connected to 8151 and link2 is connected to 8131.
Then it reboot again and agin.
After I reverse the scan from link2 to link0. It can scan out 8131 and 8111 but hung after "HyperT reset needed" is printed. Maybe the reset.c that I move from hdama got some problems.
YH.
LinuxBIOS-1.1.42.0_Fallback Thu Sep 4 17:07:56 EDT 2003 booting... Finding PCI configuration type. PCI: Using configuration type 1 Enumerating: AMD K8 Northbridge Enumerating: AMD K8 Northbridge Enumerating: AMD K8 Enumerating: AMD K8 Enumerating buses...PCI: pci_scan_bus for bus 0 PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] ops PCI: 00:18.3 [1022/1103] enabled PCI: 00:19.0 [1022/1100] enabled PCI: 00:19.1 [1022/1101] enabled PCI: 00:19.2 [1022/1102] enabled PCI: 00:19.3 [1022/1103] ops PCI: 00:19.3 [1022/1103] enabled amdk8_scan_chains max: 0 starting... dev->links= 3 Hyper transport scan link: 2 max: 1 PCI: 01:01.0 [1022/7450] enabled next_unitid: 0003 PCI: 01:03.0 [1022/7460] enabled next_unitid: 0007 HyperT reset needed
_______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios
-
YhLu