[LinuxBIOS] r3010 - in trunk/LinuxBIOSv2/src/mainboard: a-trend/atc-6220 asus/p2b asus/p2b-f asus/p3b-f azza/pt-6ibd biostar/m6tba compaq/deskpro_en_sff_p600 gigabyte/ga-6bxc tyan/s1846

Author: uwe
Date: 2007-12-17 22:34:53 +0100 (Mon, 17 Dec 2007)
New Revision: 3010

Modified:
   trunk/LinuxBIOSv2/src/mainboard/a-trend/atc-6220/Config.lb
   trunk/LinuxBIOSv2/src/mainboard/asus/p2b-f/Config.lb
   trunk/LinuxBIOSv2/src/mainboard/asus/p2b/Config.lb
   trunk/LinuxBIOSv2/src/mainboard/asus/p3b-f/Config.lb
   trunk/LinuxBIOSv2/src/mainboard/azza/pt-6ibd/Config.lb
   trunk/LinuxBIOSv2/src/mainboard/biostar/m6tba/Config.lb
   trunk/LinuxBIOSv2/src/mainboard/compaq/deskpro_en_sff_p600/Config.lb
   trunk/LinuxBIOSv2/src/mainboard/gigabyte/ga-6bxc/Config.lb
   trunk/LinuxBIOSv2/src/mainboard/tyan/s1846/Config.lb
Log:
Enable IDE legacy port access for all 440BX based boards per default, as
this is needed (at the very least) to make FILO work on these boards.

Disable UDMA/33 per default, which is slower but the safe choice, as we
don't know which IDE devices a user has attached, and some don't support
UDMA/33 very well or at all.

Signed-off-by: Uwe Hermann 
Acked-by: Carl-Daniel Hailfinger

Modified: trunk/LinuxBIOSv2/src/mainboard/a-trend/atc-6220/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/src/mainboard/a-trend/atc-6220/Config.lb	2007-12-17 14:33:32 UTC (rev 3009)
+++ trunk/LinuxBIOSv2/src/mainboard/a-trend/atc-6220/Config.lb	2007-12-17 21:34:53 UTC (rev 3010)
@@ -130,6 +130,12 @@
       device pci 7.3 on end		# ACPI
       register "ide0_enable" = "1"
       register "ide1_enable" = "1"
+      register "ide_legacy_enable" = "1"
+      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
+      register "ide0_drive0_udma33_enable" = "0"
+      register "ide0_drive1_udma33_enable" = "0"
+      register "ide1_drive0_udma33_enable" = "0"
+      register "ide1_drive1_udma33_enable" = "0"
     end
   end
 end

Modified: trunk/LinuxBIOSv2/src/mainboard/asus/p2b/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/src/mainboard/asus/p2b/Config.lb	2007-12-17 14:33:32 UTC (rev 3009)
+++ trunk/LinuxBIOSv2/src/mainboard/asus/p2b/Config.lb	2007-12-17 21:34:53 UTC (rev 3010)
@@ -130,6 +130,12 @@
       device pci 4.3 on end		# ACPI
       register "ide0_enable" = "1"
       register "ide1_enable" = "1"
+      register "ide_legacy_enable" = "1"
+      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
+      register "ide0_drive0_udma33_enable" = "0"
+      register "ide0_drive1_udma33_enable" = "0"
+      register "ide1_drive0_udma33_enable" = "0"
+      register "ide1_drive1_udma33_enable" = "0"
     end
   end
 end

Modified: trunk/LinuxBIOSv2/src/mainboard/asus/p2b-f/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/src/mainboard/asus/p2b-f/Config.lb	2007-12-17 14:33:32 UTC (rev 3009)
+++ trunk/LinuxBIOSv2/src/mainboard/asus/p2b-f/Config.lb	2007-12-17 21:34:53 UTC (rev 3010)
@@ -130,6 +130,12 @@
       device pci 4.3 on end		# ACPI
       register "ide0_enable" = "1"
       register "ide1_enable" = "1"
+      register "ide_legacy_enable" = "1"
+      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
+      register "ide0_drive0_udma33_enable" = "0"
+      register "ide0_drive1_udma33_enable" = "0"
+      register "ide1_drive0_udma33_enable" = "0"
+      register "ide1_drive1_udma33_enable" = "0"
     end
   end
 end

Modified: trunk/LinuxBIOSv2/src/mainboard/asus/p3b-f/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/src/mainboard/asus/p3b-f/Config.lb	2007-12-17 14:33:32 UTC (rev 3009)
+++ trunk/LinuxBIOSv2/src/mainboard/asus/p3b-f/Config.lb	2007-12-17 21:34:53 UTC (rev 3010)
@@ -131,6 +131,12 @@
       device pci 4.3 on end		# ACPI
       register "ide0_enable" = "1"
       register "ide1_enable" = "1"
+      register "ide_legacy_enable" = "1"
+      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
+      register "ide0_drive0_udma33_enable" = "0"
+      register "ide0_drive1_udma33_enable" = "0"
+      register "ide1_drive0_udma33_enable" = "0"
+      register "ide1_drive1_udma33_enable" = "0"
     end
   end
 end

Modified: trunk/LinuxBIOSv2/src/mainboard/azza/pt-6ibd/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/src/mainboard/azza/pt-6ibd/Config.lb	2007-12-17 14:33:32 UTC (rev 3009)
+++ trunk/LinuxBIOSv2/src/mainboard/azza/pt-6ibd/Config.lb	2007-12-17 21:34:53 UTC (rev 3010)
@@ -130,6 +130,12 @@
       device pci 7.3 on end		# ACPI
       register "ide0_enable" = "1"
       register "ide1_enable" = "1"
+      register "ide_legacy_enable" = "1"
+      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
+      register "ide0_drive0_udma33_enable" = "0"
+      register "ide0_drive1_udma33_enable" = "0"
+      register "ide1_drive0_udma33_enable" = "0"
+      register "ide1_drive1_udma33_enable" = "0"
     end
   end
 end

Modified: trunk/LinuxBIOSv2/src/mainboard/biostar/m6tba/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/src/mainboard/biostar/m6tba/Config.lb	2007-12-17 14:33:32 UTC (rev 3009)
+++ trunk/LinuxBIOSv2/src/mainboard/biostar/m6tba/Config.lb	2007-12-17 21:34:53 UTC (rev 3010)
@@ -124,6 +124,12 @@
       device pci 7.3 on end		# ACPI
       register "ide0_enable" = "1"
       register "ide1_enable" = "1"
+      register "ide_legacy_enable" = "1"
+      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
+      register "ide0_drive0_udma33_enable" = "0"
+      register "ide0_drive1_udma33_enable" = "0"
+      register "ide1_drive0_udma33_enable" = "0"
+      register "ide1_drive1_udma33_enable" = "0"
     end
   end
 end

Modified: trunk/LinuxBIOSv2/src/mainboard/compaq/deskpro_en_sff_p600/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/src/mainboard/compaq/deskpro_en_sff_p600/Config.lb	2007-12-17 14:33:32 UTC (rev 3009)
+++ trunk/LinuxBIOSv2/src/mainboard/compaq/deskpro_en_sff_p600/Config.lb	2007-12-17 21:34:53 UTC (rev 3010)
@@ -134,6 +134,12 @@
       device pci 14.3 on end		# ACPI
       register "ide0_enable" = "1"
       register "ide1_enable" = "1"
+      register "ide_legacy_enable" = "1"
+      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
+      register "ide0_drive0_udma33_enable" = "0"
+      register "ide0_drive1_udma33_enable" = "0"
+      register "ide1_drive0_udma33_enable" = "0"
+      register "ide1_drive1_udma33_enable" = "0"
     end
   end
 end

Modified: trunk/LinuxBIOSv2/src/mainboard/gigabyte/ga-6bxc/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/src/mainboard/gigabyte/ga-6bxc/Config.lb	2007-12-17 14:33:32 UTC (rev 3009)
+++ trunk/LinuxBIOSv2/src/mainboard/gigabyte/ga-6bxc/Config.lb	2007-12-17 21:34:53 UTC (rev 3010)
@@ -128,6 +128,12 @@
       device pci 7.3 on end		# ACPI
       register "ide0_enable" = "1"
       register "ide1_enable" = "1"
+      register "ide_legacy_enable" = "1"
+      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
+      register "ide0_drive0_udma33_enable" = "0"
+      register "ide0_drive1_udma33_enable" = "0"
+      register "ide1_drive0_udma33_enable" = "0"
+      register "ide1_drive1_udma33_enable" = "0"
     end
   end
 end

Modified: trunk/LinuxBIOSv2/src/mainboard/tyan/s1846/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/src/mainboard/tyan/s1846/Config.lb	2007-12-17 14:33:32 UTC (rev 3009)
+++ trunk/LinuxBIOSv2/src/mainboard/tyan/s1846/Config.lb	2007-12-17 21:34:53 UTC (rev 3010)
@@ -126,6 +126,12 @@
       device pci 7.3 on end		# ACPI
       register "ide0_enable" = "1"
       register "ide1_enable" = "1"
+      register "ide_legacy_enable" = "1"
+      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
+      register "ide0_drive0_udma33_enable" = "0"
+      register "ide0_drive1_udma33_enable" = "0"
+      register "ide1_drive0_udma33_enable" = "0"
+      register "ide1_drive1_udma33_enable" = "0"
     end
   end
 end