Author: uwe Date: 2007-12-17 22:34:53 +0100 (Mon, 17 Dec 2007) New Revision: 3010
Modified: trunk/LinuxBIOSv2/src/mainboard/a-trend/atc-6220/Config.lb trunk/LinuxBIOSv2/src/mainboard/asus/p2b-f/Config.lb trunk/LinuxBIOSv2/src/mainboard/asus/p2b/Config.lb trunk/LinuxBIOSv2/src/mainboard/asus/p3b-f/Config.lb trunk/LinuxBIOSv2/src/mainboard/azza/pt-6ibd/Config.lb trunk/LinuxBIOSv2/src/mainboard/biostar/m6tba/Config.lb trunk/LinuxBIOSv2/src/mainboard/compaq/deskpro_en_sff_p600/Config.lb trunk/LinuxBIOSv2/src/mainboard/gigabyte/ga-6bxc/Config.lb trunk/LinuxBIOSv2/src/mainboard/tyan/s1846/Config.lb Log: Enable IDE legacy port access for all 440BX based boards per default, as this is needed (at the very least) to make FILO work on these boards.
Disable UDMA/33 per default, which is slower but the safe choice, as we don't know which IDE devices a user has attached, and some don't support UDMA/33 very well or at all.
Signed-off-by: Uwe Hermann uwe@hermann-uwe.de Acked-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
Modified: trunk/LinuxBIOSv2/src/mainboard/a-trend/atc-6220/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/a-trend/atc-6220/Config.lb 2007-12-17 14:33:32 UTC (rev 3009) +++ trunk/LinuxBIOSv2/src/mainboard/a-trend/atc-6220/Config.lb 2007-12-17 21:34:53 UTC (rev 3010) @@ -130,6 +130,12 @@ device pci 7.3 on end # ACPI register "ide0_enable" = "1" register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" end end end
Modified: trunk/LinuxBIOSv2/src/mainboard/asus/p2b/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/asus/p2b/Config.lb 2007-12-17 14:33:32 UTC (rev 3009) +++ trunk/LinuxBIOSv2/src/mainboard/asus/p2b/Config.lb 2007-12-17 21:34:53 UTC (rev 3010) @@ -130,6 +130,12 @@ device pci 4.3 on end # ACPI register "ide0_enable" = "1" register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" end end end
Modified: trunk/LinuxBIOSv2/src/mainboard/asus/p2b-f/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/asus/p2b-f/Config.lb 2007-12-17 14:33:32 UTC (rev 3009) +++ trunk/LinuxBIOSv2/src/mainboard/asus/p2b-f/Config.lb 2007-12-17 21:34:53 UTC (rev 3010) @@ -130,6 +130,12 @@ device pci 4.3 on end # ACPI register "ide0_enable" = "1" register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" end end end
Modified: trunk/LinuxBIOSv2/src/mainboard/asus/p3b-f/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/asus/p3b-f/Config.lb 2007-12-17 14:33:32 UTC (rev 3009) +++ trunk/LinuxBIOSv2/src/mainboard/asus/p3b-f/Config.lb 2007-12-17 21:34:53 UTC (rev 3010) @@ -131,6 +131,12 @@ device pci 4.3 on end # ACPI register "ide0_enable" = "1" register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" end end end
Modified: trunk/LinuxBIOSv2/src/mainboard/azza/pt-6ibd/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/azza/pt-6ibd/Config.lb 2007-12-17 14:33:32 UTC (rev 3009) +++ trunk/LinuxBIOSv2/src/mainboard/azza/pt-6ibd/Config.lb 2007-12-17 21:34:53 UTC (rev 3010) @@ -130,6 +130,12 @@ device pci 7.3 on end # ACPI register "ide0_enable" = "1" register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" end end end
Modified: trunk/LinuxBIOSv2/src/mainboard/biostar/m6tba/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/biostar/m6tba/Config.lb 2007-12-17 14:33:32 UTC (rev 3009) +++ trunk/LinuxBIOSv2/src/mainboard/biostar/m6tba/Config.lb 2007-12-17 21:34:53 UTC (rev 3010) @@ -124,6 +124,12 @@ device pci 7.3 on end # ACPI register "ide0_enable" = "1" register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" end end end
Modified: trunk/LinuxBIOSv2/src/mainboard/compaq/deskpro_en_sff_p600/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/compaq/deskpro_en_sff_p600/Config.lb 2007-12-17 14:33:32 UTC (rev 3009) +++ trunk/LinuxBIOSv2/src/mainboard/compaq/deskpro_en_sff_p600/Config.lb 2007-12-17 21:34:53 UTC (rev 3010) @@ -134,6 +134,12 @@ device pci 14.3 on end # ACPI register "ide0_enable" = "1" register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" end end end
Modified: trunk/LinuxBIOSv2/src/mainboard/gigabyte/ga-6bxc/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/gigabyte/ga-6bxc/Config.lb 2007-12-17 14:33:32 UTC (rev 3009) +++ trunk/LinuxBIOSv2/src/mainboard/gigabyte/ga-6bxc/Config.lb 2007-12-17 21:34:53 UTC (rev 3010) @@ -128,6 +128,12 @@ device pci 7.3 on end # ACPI register "ide0_enable" = "1" register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" end end end
Modified: trunk/LinuxBIOSv2/src/mainboard/tyan/s1846/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/tyan/s1846/Config.lb 2007-12-17 14:33:32 UTC (rev 3009) +++ trunk/LinuxBIOSv2/src/mainboard/tyan/s1846/Config.lb 2007-12-17 21:34:53 UTC (rev 3010) @@ -126,6 +126,12 @@ device pci 7.3 on end # ACPI register "ide0_enable" = "1" register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" end end end