Hello,
I am trying to build CoreBoot from Windows using MingGW.
After downloading the latest version of the complete package to enable this it is possible to build this without problem.
As this package contains an old version of the tree I updated this to the latest one. After doing this it's not possible to build the Persimmon tree any longer.
In the latest CoreBoot version the Persimmon tree uses the nvramtool.exe to generate "option_table.h". When this is started I get a "nvramtool.exe has stopped working message" is anyone familiar with that? Is there a solution for this so I can get the tree building with the latest version as well?
Best regards,
Wim Vervoorn
2013/5/6 Wim Vervoorn wvervoorn@eltan.com:
Hello,
I am trying to build CoreBoot from Windows using MingGW.
After downloading the latest version of the complete package to enable this it is possible to build this without problem.
As this package contains an old version of the tree I updated this to the latest one. After doing this it’s not possible to build the Persimmon tree any longer.
In the latest CoreBoot version the Persimmon tree uses the nvramtool.exe to generate “option_table.h”. When this is started I get a “nvramtool.exe has stopped working message” is anyone familiar with that? Is there a solution for this so I can get the tree building with the latest version as well?
My guess is that nvramtool won't work on any Windows build since Windows most likely blocks CMOS (nvram) access. Most developers are using Linux; if you are in dire need of a persimmon coreboot.rom: please say so (I or someone else can send you one off-list).
Best regards,
Wim Vervoorn
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot