Am 25.06.2013 23:08, schrieb Dmitry Bagryanskiy: Hello Dmitry,
My processor type is Intel Core 2 Duo P8400, socket mFCPGA479M
IIRC, I've seen at least one RK9 with this CPU running coreboot.
Looking through your log files, I didn't find anything suspicious. I'll try to check if current upstream coreboot really works on our RK9, tomorrow. Meanwhile, could you post your coreboot .config? And when responding, please always cc the coreboot mailing list.
Nico
Hello Nico,
Thank you for youe response and help. Your binary works well with our Rk9. I build coreboot with the utility abuild with default settings, write the chip with flashroom, then I make the reboot and the laptop is turn off in a few seconds. There is no eve debug information. COM port also doesn't work. I use gcc-4.4.7 version. I also tryed to use gcc-4.6.3 and it didn't make any results also. I don't understand the reasin why it may happen.
Thank you Best regards, Dmitry Bagryanskiy
2013/6/26 Nico Huber nico.h@gmx.de
Am 25.06.2013 23:08, schrieb Dmitry Bagryanskiy: Hello Dmitry,
My processor type is Intel Core 2 Duo P8400, socket mFCPGA479M
IIRC, I've seen at least one RK9 with this CPU running coreboot.
Looking through your log files, I didn't find anything suspicious. I'll try to check if current upstream coreboot really works on our RK9, tomorrow. Meanwhile, could you post your coreboot .config? And when responding, please always cc the coreboot mailing list.
Nico
-
Dmitry Bagryanskiy -
Nico Huber