Re: [LinuxBIOS] does any one have access to the VT8237 docs

[Samet, Matt]

I looked online for a while and could not find the VT8237 datasheet.  I
tried asking VIA for the doc (they have a form you can fill out for the
NDA) but they didn't respond either.

I looked through the list archives and saw that Bari Ari was working on
adding support for the vt8237 -- Bari, any chance of an update?

Thanks,

-=matt

-----Original Message-----
From: [e-mail]
[mailto:[e-mail]] On Behalf Of Adam Talbot
Sent: Tuesday, February 28, 2006 1:51 PM
To: [e-mail]
Subject: [LinuxBIOS] does any one have access to the VT8237 docs

Still trying to get my EBC3266 board to post with linux bios.  That 
board is based on the VT8623 and VT8237 chips.  I currently am unable to

get any console.  I would guess that is because I am unable to start the

south bridge, where the vt1211 is attached. I was hoping that is was 
close enughf to the VT8235, but I guess I am wrong.  OK, time to start 
trying to add support for the VT8237 south bridge.  Does any one have 
access to the Docs for the VT8237?
-Adam Talbot

[LinuxBIOS] does any one have access to the VT8237 docs

[Adam Talbot]

-Matt
Steve G was able to provide me with the correct doc.
-Adam Talbot

Samet, Matt wrote:
> I looked online for a while and could not find the VT8237 datasheet.  I
> tried asking VIA for the doc (they have a form you can fill out for the
> NDA) but they didn't respond either.
>
> I looked through the list archives and saw that Bari Ari was working on
> adding support for the vt8237 -- Bari, any chance of an update?
>
> Thanks,
>
> -=matt
>
> -----Original Message-----
> From: [e-mail]
> [mailto:[e-mail]] On Behalf Of Adam Talbot
> Sent: Tuesday, February 28, 2006 1:51 PM
> To: [e-mail]
> Subject: [LinuxBIOS] does any one have access to the VT8237 docs
>
> Still trying to get my EBC3266 board to post with linux bios.  That 
> board is based on the VT8623 and VT8237 chips.  I currently am unable to
>
> get any console.  I would guess that is because I am unable to start the
>
> south bridge, where the vt1211 is attached. I was hoping that is was 
> close enughf to the VT8235, but I guess I am wrong.  OK, time to start 
> trying to add support for the VT8237 south bridge.  Does any one have 
> access to the Docs for the VT8237?
> -Adam Talbot