Can you try using just 1 memory module to start with and see if that helps.
Hi!
I checked out r2717 and at first it behaved like Markus Boas Epia V but then I applied Ben's patch to the vt8231_early_serial.c and it booted into filo, once, then hanged at the dram setup. then I applied the vt8231_lpc.c patch and it hangs on this:
LinuxBIOS-2.0.0.0Normal Mon Jun 11 22:28:57 CEST 2007 starting... 87 is the comm register SMBus controller enabled vt8601 init starting 00000000 is the north 1106 0601 0120d4 is the computed timing NOP PRECHARGE DUMMY READS CBR MRS NORMAL set ref. rate enable multi-page open Slot 00 is SDRAM 10000000 bytes 000e is the MA type Slot 01 is SDRAM 08000000 bytes x2 000c is the MA type Slot 02 is empty Slot 03 is empty vt8601 done Copying LinuxBIOS to RAM. Jumping to LinuxBIOS. LinuxBIOS-2.0.0.0Normal Mon Jun 11 22:28:57 CEST 2007 booting... Enumerating buses... scan_static_bus for Root Device Finding PCI configuration type. PCI: Using configuration type 1 PCI_DOMAIN: 0000 enabled APIC_CLUSTER: 0 enabled PCI_DOMAIN: 0000 scanning... PCI: pci_scan_bus for bus 00 PCI: 00:00.0 [1106/0601] ops PCI: 00:00.0 [1106/0601] enabled malloc Enter, size 668, free_mem_ptr 00018000 malloc 0x00018000 Capability: 0x07 @ 0x80 Capability: 0x08 @ 0x80 Capability: 0x10 @ 0x80 PCI: 00:01.0 [1106/8601] enabled PCI: devfn 0x10, bad id 0xffffffff PCI: devfn 0x18, bad id 0xffffffff PCI: devfn 0x20, bad id 0xffffffff PCI: devfn 0x28, bad id 0xffffffff PCI: devfn 0x30, bad id 0xffffffff PCI: devfn 0x38, bad id 0xffffffff PCI: devfn 0x40, bad id 0xffffffff PCI: devfn 0x48, bad id 0xffffffff PCI: devfn 0x50, bad id 0xffffffff PCI: devfn 0x58, bad id 0xffffffff PCI: devfn 0x60, bad id 0xffffffff PCI: devfn 0x68, bad id 0xffffffff PCI: devfn 0x70, bad id 0xffffffff PCI: devfn 0x78, bad id 0xffffffff PCI: devfn 0x80, bad id 0xffffffff PCI: 00:11.0 [1106/8231] bus ops PCI: 00:11.0 [1106/8231] enabled PCI: 00:11.1 [1106/0571] ops PCI: 00:11.1 [1106/0571] enabled PCI: 00:11.2 [1106/3038] disabled PCI: 00:11.3 [1106/3038] disabled PCI: 00:11.4 [1106/8235] ops PCI: 00:11.4 [1106/8235] disabled PCI: 00:11.5 [1106/3058] disabled PCI: 00:11.6 [1106/3068] enabled PCI: devfn 0x8f, bad id 0xffffffff PCI: 00:12.0 [1106/3065] ops PCI: 00:12.0 [1106/3065] enabled PCI: devfn 0x98, bad id 0xffffffff malloc Enter, size 668, free_mem_ptr 0001829c malloc 0x0001829c PCI: 00:14.0 [1106/3065] ops PCI: 00:14.0 [1106/3065] enabled PCI: devfn 0xa8, bad id 0xffffffff PCI: devfn 0xb0, bad id 0xffffffff PCI: devfn 0xb8, bad id 0xffffffff PCI: devfn 0xc0, bad id 0xffffffff PCI: devfn 0xc8, bad id 0xffffffff PCI: devfn 0xd0, bad id 0xffffffff PCI: devfn 0xd8, bad id 0xffffffff PCI: devfn 0xe0, bad id 0xffffffff PCI: devfn 0xe8, bad id 0xffffffff PCI: devfn 0xf0, bad id 0xffffffff PCI: devfn 0xf8, bad id 0xffffffff do_pci_scan_bridge for PCI: 00:01.0 PCI: pci_scan_bus for bus 01 PCI: devfn 0x0, bad id 0xffffffff PCI: devfn 0x8, bad id 0xffffffff PCI: devfn 0x10, bad id 0xffffffff PCI: devfn 0x18, bad id 0xffffffff PCI: devfn 0x20, bad id 0xffffffff PCI: devfn 0x28, bad id 0xffffffff PCI: devfn 0x30, bad id 0xffffffff PCI: devfn 0x38, bad id 0xffffffff PCI: devfn 0x40, bad id 0xffffffff PCI: devfn 0x48, bad id 0xffffffff PCI: devfn 0x50, bad id 0xffffffff PCI: devfn 0x58, bad id 0xffffffff PCI: devfn 0x60, bad id 0xffffffff PCI: devfn 0x68, bad id 0xffffffff PCI: devfn 0x70, bad id 0xffffffff PCI: devfn 0x78, bad id 0xffffffff PCI: devfn 0x80, bad id 0xffffffff PCI: devfn 0x88, bad id 0xffffffff PCI: devfn 0x90, bad id 0xffffffff PCI: devfn 0x98, bad id 0xffffffff PCI: devfn 0xa0, bad id 0xffffffff PCI: devfn 0xa8, bad id 0xffffffff PCI: devfn 0xb0, bad id 0xffffffff PCI: devfn 0xb8, bad id 0xffffffff PCI: devfn 0xc0, bad id 0xffffffff PCI: devfn 0xc8, bad id 0xffffffff PCI: devfn 0xd0, bad id 0xffffffff PCI: devfn 0xd8, bad id 0xffffffff PCI: devfn 0xe0, bad id 0xffffffff PCI: devfn 0xe8, bad id 0xffffffff PCI: devfn 0xf0, bad id 0xffffffff PCI: devfn 0xf8, bad id 0xffffffff PCI: pci_scan_bus returning with max=001 do_pci_scan_bridge returns max 1 scan_static_bus for PCI: 00:11.0 malloc Enter, size 668, free_mem_ptr 00018538 malloc 0x00018538 malloc Enter, size 668, free_mem_ptr 000187d4 malloc 0x000187d4 malloc Enter, size 668, free_mem_ptr 00018a70 malloc 0x00018a70 malloc Enter, size 668, free_mem_ptr 00018d0c malloc 0x00018d0c malloc Enter, size 668, free_mem_ptr 00018fa8 malloc 0x00018fa8 malloc Enter, size 668, free_mem_ptr 00019244 malloc 0x00019244 malloc Enter, size 668, free_mem_ptr 000194e0 malloc 0x000194e0 malloc Enter, size 668, free_mem_ptr 0001977c malloc 0x0001977c malloc Enter, size 668, free_mem_ptr 00019a18 malloc 0x00019a18 malloc Enter, size 668, free_mem_ptr 00019cb4 malloc 0x00019cb4 malloc Enter, size 668, free_mem_ptr 00019f50 malloc 0x00019f50 PNP: 002e.0 disabled PNP: 002e.1 disabled PNP: 002e.2 enabled PNP: 002e.3 disabled PNP: 002e.5 enabled PNP: 002e.6 disabled PNP: 002e.7 disabled PNP: 002e.8 disabled PNP: 002e.9 disabled PNP: 002e.a disabled PNP: 002e.b enabled PNP: 607a.0 enabled PNP: 607a.1 enabled PNP: 607a.2 enabled PNP: 607a.3 enabled PNP: 607a.5 enabled PNP: 607a.6 enabled PNP: 607a.7 enabled PNP: 607a.8 enabled PNP: 607a.9 enabled PNP: 607a.a enabled PNP: 607a.b enabled scan_static_bus for PCI: 00:11.0 done PCI: pci_scan_bus returning with max=001 Unexpected Exception: 6 @ 10:e2c3f00a - Halting Code: 0 eflags: 00010093 eax: ffffff00 ebx: 00000000 ecx: 000003f8 edx: 00017eec edi: 00000000 esi: 00000000 ebp: 00000000 esp: 00010004
Any ideas would be great!
Thanks! /Thomas
-- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios
Am Tue, 12 Jun 2007 09:48:47 +0200 schrieb ben@hewson-venieri.co.uk: The Epia V has only one SD-Ram Slot. And badly is like "only" Infineon Chips. :-(
Markus
Can you try using just 1 memory module to start with and see if that helps.
Hi!
I checked out r2717 and at first it behaved like Markus Boas Epia V but then I applied Ben's patch to the vt8231_early_serial.c and it booted into filo, once, then hanged at the dram setup. then I applied the vt8231_lpc.c patch and it hangs on this:
LinuxBIOS-2.0.0.0Normal Mon Jun 11 22:28:57 CEST 2007 starting... 87 is the comm register SMBus controller enabled vt8601 init starting 00000000 is the north 1106 0601 0120d4 is the computed timing NOP PRECHARGE DUMMY READS CBR MRS NORMAL set ref. rate enable multi-page open Slot 00 is SDRAM 10000000 bytes 000e is the MA type Slot 01 is SDRAM 08000000 bytes x2 000c is the MA type Slot 02 is empty Slot 03 is empty vt8601 done Copying LinuxBIOS to RAM. Jumping to LinuxBIOS. LinuxBIOS-2.0.0.0Normal Mon Jun 11 22:28:57 CEST 2007 booting... Enumerating buses... scan_static_bus for Root Device Finding PCI configuration type. PCI: Using configuration type 1 PCI_DOMAIN: 0000 enabled APIC_CLUSTER: 0 enabled PCI_DOMAIN: 0000 scanning... PCI: pci_scan_bus for bus 00 PCI: 00:00.0 [1106/0601] ops PCI: 00:00.0 [1106/0601] enabled malloc Enter, size 668, free_mem_ptr 00018000 malloc 0x00018000 Capability: 0x07 @ 0x80 Capability: 0x08 @ 0x80 Capability: 0x10 @ 0x80 PCI: 00:01.0 [1106/8601] enabled PCI: devfn 0x10, bad id 0xffffffff PCI: devfn 0x18, bad id 0xffffffff PCI: devfn 0x20, bad id 0xffffffff PCI: devfn 0x28, bad id 0xffffffff PCI: devfn 0x30, bad id 0xffffffff PCI: devfn 0x38, bad id 0xffffffff PCI: devfn 0x40, bad id 0xffffffff PCI: devfn 0x48, bad id 0xffffffff PCI: devfn 0x50, bad id 0xffffffff PCI: devfn 0x58, bad id 0xffffffff PCI: devfn 0x60, bad id 0xffffffff PCI: devfn 0x68, bad id 0xffffffff PCI: devfn 0x70, bad id 0xffffffff PCI: devfn 0x78, bad id 0xffffffff PCI: devfn 0x80, bad id 0xffffffff PCI: 00:11.0 [1106/8231] bus ops PCI: 00:11.0 [1106/8231] enabled PCI: 00:11.1 [1106/0571] ops PCI: 00:11.1 [1106/0571] enabled PCI: 00:11.2 [1106/3038] disabled PCI: 00:11.3 [1106/3038] disabled PCI: 00:11.4 [1106/8235] ops PCI: 00:11.4 [1106/8235] disabled PCI: 00:11.5 [1106/3058] disabled PCI: 00:11.6 [1106/3068] enabled PCI: devfn 0x8f, bad id 0xffffffff PCI: 00:12.0 [1106/3065] ops PCI: 00:12.0 [1106/3065] enabled PCI: devfn 0x98, bad id 0xffffffff malloc Enter, size 668, free_mem_ptr 0001829c malloc 0x0001829c PCI: 00:14.0 [1106/3065] ops PCI: 00:14.0 [1106/3065] enabled PCI: devfn 0xa8, bad id 0xffffffff PCI: devfn 0xb0, bad id 0xffffffff PCI: devfn 0xb8, bad id 0xffffffff PCI: devfn 0xc0, bad id 0xffffffff PCI: devfn 0xc8, bad id 0xffffffff PCI: devfn 0xd0, bad id 0xffffffff PCI: devfn 0xd8, bad id 0xffffffff PCI: devfn 0xe0, bad id 0xffffffff PCI: devfn 0xe8, bad id 0xffffffff PCI: devfn 0xf0, bad id 0xffffffff PCI: devfn 0xf8, bad id 0xffffffff do_pci_scan_bridge for PCI: 00:01.0 PCI: pci_scan_bus for bus 01 PCI: devfn 0x0, bad id 0xffffffff PCI: devfn 0x8, bad id 0xffffffff PCI: devfn 0x10, bad id 0xffffffff PCI: devfn 0x18, bad id 0xffffffff PCI: devfn 0x20, bad id 0xffffffff PCI: devfn 0x28, bad id 0xffffffff PCI: devfn 0x30, bad id 0xffffffff PCI: devfn 0x38, bad id 0xffffffff PCI: devfn 0x40, bad id 0xffffffff PCI: devfn 0x48, bad id 0xffffffff PCI: devfn 0x50, bad id 0xffffffff PCI: devfn 0x58, bad id 0xffffffff PCI: devfn 0x60, bad id 0xffffffff PCI: devfn 0x68, bad id 0xffffffff PCI: devfn 0x70, bad id 0xffffffff PCI: devfn 0x78, bad id 0xffffffff PCI: devfn 0x80, bad id 0xffffffff PCI: devfn 0x88, bad id 0xffffffff PCI: devfn 0x90, bad id 0xffffffff PCI: devfn 0x98, bad id 0xffffffff PCI: devfn 0xa0, bad id 0xffffffff PCI: devfn 0xa8, bad id 0xffffffff PCI: devfn 0xb0, bad id 0xffffffff PCI: devfn 0xb8, bad id 0xffffffff PCI: devfn 0xc0, bad id 0xffffffff PCI: devfn 0xc8, bad id 0xffffffff PCI: devfn 0xd0, bad id 0xffffffff PCI: devfn 0xd8, bad id 0xffffffff PCI: devfn 0xe0, bad id 0xffffffff PCI: devfn 0xe8, bad id 0xffffffff PCI: devfn 0xf0, bad id 0xffffffff PCI: devfn 0xf8, bad id 0xffffffff PCI: pci_scan_bus returning with max=001 do_pci_scan_bridge returns max 1 scan_static_bus for PCI: 00:11.0 malloc Enter, size 668, free_mem_ptr 00018538 malloc 0x00018538 malloc Enter, size 668, free_mem_ptr 000187d4 malloc 0x000187d4 malloc Enter, size 668, free_mem_ptr 00018a70 malloc 0x00018a70 malloc Enter, size 668, free_mem_ptr 00018d0c malloc 0x00018d0c malloc Enter, size 668, free_mem_ptr 00018fa8 malloc 0x00018fa8 malloc Enter, size 668, free_mem_ptr 00019244 malloc 0x00019244 malloc Enter, size 668, free_mem_ptr 000194e0 malloc 0x000194e0 malloc Enter, size 668, free_mem_ptr 0001977c malloc 0x0001977c malloc Enter, size 668, free_mem_ptr 00019a18 malloc 0x00019a18 malloc Enter, size 668, free_mem_ptr 00019cb4 malloc 0x00019cb4 malloc Enter, size 668, free_mem_ptr 00019f50 malloc 0x00019f50 PNP: 002e.0 disabled PNP: 002e.1 disabled PNP: 002e.2 enabled PNP: 002e.3 disabled PNP: 002e.5 enabled PNP: 002e.6 disabled PNP: 002e.7 disabled PNP: 002e.8 disabled PNP: 002e.9 disabled PNP: 002e.a disabled PNP: 002e.b enabled PNP: 607a.0 enabled PNP: 607a.1 enabled PNP: 607a.2 enabled PNP: 607a.3 enabled PNP: 607a.5 enabled PNP: 607a.6 enabled PNP: 607a.7 enabled PNP: 607a.8 enabled PNP: 607a.9 enabled PNP: 607a.a enabled PNP: 607a.b enabled scan_static_bus for PCI: 00:11.0 done PCI: pci_scan_bus returning with max=001 Unexpected Exception: 6 @ 10:e2c3f00a - Halting Code: 0 eflags: 00010093 eax: ffffff00 ebx: 00000000 ecx: 000003f8 edx: 00017eec edi: 00000000 esi: 00000000 ebp: 00000000 esp: 00010004
Any ideas would be great!
Thanks! /Thomas
-- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios
Markus wrote:
Am Tue, 12 Jun 2007 09:48:47 +0200 schrieb ben@hewson-venieri.co.uk: The Epia V has only one SD-Ram Slot. And badly is like "only" Infineon Chips. :-(
if that is the case then there is a problem with the ram init I think.
Slot 00 is SDRAM 10000000 bytes 000e is the MA type Slot 01 is SDRAM 08000000 bytes x2 000c is the MA type
Ben
Am Tue, 12 Jun 2007 19:47:04 +0100 schrieb Ben Hewson ben@hewson-venieri.com:
Markus wrote:
Am Tue, 12 Jun 2007 09:48:47 +0200 schrieb ben@hewson-venieri.co.uk: The Epia V has only one SD-Ram Slot. And badly is like "only" Infineon Chips. :-(
if that is the case then there is a problem with the ram init I think.
Slot 00 is SDRAM 10000000 bytes 000e is the MA type Slot 01 is SDRAM 08000000 bytes x2 000c is the MA type
Ben
An Boot with the Via Bios runs? Did memtest dedecet any errors? In case was the trouble, that the epia doesn't boot or dedect the ram not correct.
Markus
-
Ben Hewson -
ben＠hewson-venieri.co.uk -
Markus -
Markus