Hi,
Please find the latest report on new defect(s) introduced to coreboot found with Coverity Scan.
122 new defect(s) introduced to coreboot found with Coverity Scan. 11 defect(s), reported by Coverity Scan earlier, were marked fixed in the recent build analyzed by Coverity Scan.
New defect(s) Reported-by: Coverity Scan Showing 20 of 122 defect(s)
** CID 1446367: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /3rdparty/chromeec/common/usb_pd_policy.c: 422 in is_usb4_vdo()
________________________________________________________________________________________________________ *** CID 1446367: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /3rdparty/chromeec/common/usb_pd_policy.c: 422 in is_usb4_vdo() 416 if (IS_PD_IDH_UFP_PTYPE(ptype)) { 417 /* 418 * Ref: USB Type-C Cable and Connector Specification 419 * Figure 5-1 USB4 Discovery and Entry Flow Model 420 * Device USB4 VDO detection. 421 */
CID 1446367: Integer handling issues (CONSTANT_EXPRESSION_RESULT) "({...; 0;}) && is_vdo_present(cnt, 4)" is always false regardless of the values of its operands. This occurs as the logical first operand of "&&".
422 return IS_ENABLED(CONFIG_USB_PD_USB4) && 423 is_vdo_present(cnt, VDO_INDEX_PTYPE_UFP1_VDO) && 424 PD_PRODUCT_IS_USB4(payload[VDO_INDEX_PTYPE_UFP1_VDO]); 425 } 426 return false; 427 }
** CID 1446366: Parse warnings (PARSE_ERROR) /3rdparty/chromeec/common/motion_lid.c: 104 in ()
________________________________________________________________________________________________________ *** CID 1446366: Parse warnings (PARSE_ERROR) /3rdparty/chromeec/common/motion_lid.c: 104 in () 98 static const struct motion_sensor_t * const accel_base = 99 &motion_sensors[CONFIG_LID_ANGLE_SENSOR_BASE]; 100 static const struct motion_sensor_t * const accel_lid = 101 &motion_sensors[CONFIG_LID_ANGLE_SENSOR_LID]; 102 103 STATIC_IF(CONFIG_TABLET_MODE) void motion_lid_set_tablet_mode(int reliable);
CID 1446366: Parse warnings (PARSE_ERROR) expression must be an integral constant expression
104 STATIC_IF(CONFIG_TABLET_MODE) int lid_angle_set_tablet_mode_threshold( 105 int angle, int hys); 106 107 STATIC_IF(CONFIG_TABLET_MODE) fp_t tablet_zone_lid_angle; 108 STATIC_IF(CONFIG_TABLET_MODE) fp_t laptop_zone_lid_angle; 109 STATIC_IF(CONFIG_TABLET_MODE) int tablet_mode_lid_angle;
** CID 1446365: (DEADCODE) /3rdparty/chromeec/driver/charger/isl923x.c: 512 in isl923x_init() /3rdparty/chromeec/driver/charger/isl923x.c: 608 in isl923x_init() /3rdparty/chromeec/driver/charger/isl923x.c: 473 in isl923x_init() /3rdparty/chromeec/driver/charger/isl923x.c: 577 in isl923x_init() /3rdparty/chromeec/driver/charger/isl923x.c: 591 in isl923x_init()
________________________________________________________________________________________________________ *** CID 1446365: (DEADCODE) /3rdparty/chromeec/driver/charger/isl923x.c: 512 in isl923x_init() 506 reg | 507 ISL9237_C1_SWITCH_FREQ_599K)) 508 goto init_fail; 509 } 510 511 if (IS_ENABLED(CONFIG_TRICKLE_CHARGING))
CID 1446365: (DEADCODE) Execution cannot reach this statement: "if (raw_write16(chgnum, 62,...".
512 if (raw_write16(chgnum, ISL923X_REG_SYS_VOLTAGE_MIN, 513 precharge_voltage)) 514 goto init_fail; 515 516 /* 517 * [10:9]: Prochot# Debounce time /3rdparty/chromeec/driver/charger/isl923x.c: 608 in isl923x_init() 602 if (IS_ENABLED(CHARGER_ISL9238X) || 603 IS_ENABLED(CONFIG_CHARGER_RAA489000)) { 604 /* 605 * Don't reread the prog pin and don't reload the ILIM on ACIN. 606 * For the RAA489000, just don't reload ACLIM. 607 */
CID 1446365: (DEADCODE) Execution cannot reach this statement: "if (raw_read16(chgnum, 76, ...".
608 if (raw_read16(chgnum, ISL9238_REG_CONTROL3, ®)) 609 goto init_fail; 610 reg |= ISL9238_C3_NO_RELOAD_ACLIM_ON_ACIN; 611 if (!IS_ENABLED(CONFIG_CHARGER_RAA489000)) 612 reg |= ISL9238_C3_NO_REREAD_PROG_PIN; 613 /3rdparty/chromeec/driver/charger/isl923x.c: 473 in isl923x_init() 467 int reg; 468 const struct battery_info *bi = battery_get_info(); 469 int precharge_voltage = bi->precharge_voltage ? 470 bi->precharge_voltage : bi->voltage_min; 471 472 if (IS_ENABLED(CONFIG_CHARGER_RAA489000)) {
CID 1446365: (DEADCODE) Execution cannot reach this statement: "if (0) {
if (raw_read16(c...". 473 if (CONFIG_CHARGER_SENSE_RESISTOR == 474 CONFIG_CHARGER_SENSE_RESISTOR_AC) { 475 /* 476 * A 1:1 ratio for Rs1:Rs2 is allowed, but Control4 477 * register Bit<11> must be set. 478 */ /3rdparty/chromeec/driver/charger/isl923x.c: 577 in isl923x_init() 571 if (raw_write16(chgnum, ISL923X_REG_CONTROL0, reg)) 572 goto init_fail; 573 } 574 575 if (IS_ENABLED(CONFIG_CHARGER_ISL9238C)) { 576 /* b/155366741: enable slew rate control */
CID 1446365: (DEADCODE) Execution cannot reach this statement: "if (raw_read16(chgnum, 55, ...".
577 if (raw_read16(chgnum, ISL9238C_REG_CONTROL6, ®)) 578 goto init_fail; 579 580 reg |= ISL9238C_C6_SLEW_RATE_CONTROL; 581 582 if (raw_write16(chgnum, ISL9238C_REG_CONTROL6, reg)) /3rdparty/chromeec/driver/charger/isl923x.c: 591 in isl923x_init() 585 586 if (IS_ENABLED(CONFIG_CHARGER_RAA489000)) { 587 /* 588 * Return the BFET to normal operation as it may have been 589 * turned off when entering hibernate. 590 */
CID 1446365: (DEADCODE) Execution cannot reach this statement: "if (raw_read16(chgnum, 60, ...".
591 if (raw_read16(chgnum, ISL923X_REG_CONTROL1, ®)) 592 goto init_fail; 593 reg &= ~RAA489000_C1_BGATE_FORCE_OFF; 594 if (raw_write16(chgnum, ISL923X_REG_CONTROL1, reg)) 595 goto init_fail; 596 }
** CID 1446364: Control flow issues (DEADCODE) /3rdparty/chromeec/common/keyboard_8042.c: 882 in i8042_handle_from_host()
________________________________________________________________________________________________________ *** CID 1446364: Control flow issues (DEADCODE) /3rdparty/chromeec/common/keyboard_8042.c: 882 in i8042_handle_from_host() 876 if (h.type == HOST_COMMAND) { 877 ret_len = handle_keyboard_command(h.byte, output); 878 } else { 879 CPRINTS5("KB recv data: 0x%02x", h.byte); 880 kblog_put('d', h.byte); 881
CID 1446364: Control flow issues (DEADCODE) Execution cannot reach the expression "handle_mouse_data(h.byte, output, &ret_len)" inside this statement: "if (({
int __undefined = ...". 882 if (IS_ENABLED(CONFIG_8042_AUX) && 883 handle_mouse_data(h.byte, output, &ret_len)) 884 chan = CHAN_AUX; 885 else 886 ret_len = handle_keyboard_data(h.byte, output); 887 }
** CID 1446363: Control flow issues (DEADCODE) /3rdparty/chromeec/common/throttle_ap.c: 93 in prochot_input_deferred()
________________________________________________________________________________________________________ *** CID 1446363: Control flow issues (DEADCODE) /3rdparty/chromeec/common/throttle_ap.c: 93 in prochot_input_deferred() 87 */ 88 ASSERT(signal_is_gpio(gpio_prochot_in)); 89 90 prochot_in = gpio_get_level(gpio_prochot_in); 91 92 if (IS_ENABLED(CONFIG_CPU_PROCHOT_ACTIVE_LOW))
CID 1446363: Control flow issues (DEADCODE) Execution cannot reach the expression "prochot_in" inside this statement: "prochot_in = !prochot_in;".
93 prochot_in = !prochot_in; 94 95 if (prochot_in == debounced_prochot_in) 96 return; 97 98 debounced_prochot_in = prochot_in;
** CID 1446362: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /3rdparty/chromeec/common/motion_sense.c: 1415 in host_cmd_motion_sense()
________________________________________________________________________________________________________ *** CID 1446362: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /3rdparty/chromeec/common/motion_sense.c: 1415 in host_cmd_motion_sense() 1409 #endif /* defined(CONFIG_GESTURE_HOST_DETECTION) */ 1410 1411 #ifdef CONFIG_ACCEL_SPOOF_MODE 1412 case MOTIONSENSE_CMD_SPOOF: { 1413 /* spoof activity if it is activity sensor */ 1414 if (IS_ENABLED(CONFIG_GESTURE_HOST_DETECTION) &&
CID 1446362: Integer handling issues (CONSTANT_EXPRESSION_RESULT) "(*in).spoof.sensor_id == -1" is always false regardless of the values of its operands. This occurs as the logical second operand of "&&".
1415 in->spoof.sensor_id == MOTION_SENSE_ACTIVITY_SENSOR_ID) { 1416 switch (in->spoof.activity_num) { 1417 #ifdef CONFIG_BODY_DETECTION 1418 case MOTIONSENSE_ACTIVITY_BODY_DETECTION: 1419 switch (in->spoof.spoof_enable) { 1420 case MOTIONSENSE_SPOOF_MODE_DISABLE:
** CID 1446361: Control flow issues (DEADCODE) /3rdparty/chromeec/common/usb_pd_policy.c: 321 in is_cable_ready_to_enter_usb4()
________________________________________________________________________________________________________ *** CID 1446361: Control flow issues (DEADCODE) /3rdparty/chromeec/common/usb_pd_policy.c: 321 in is_cable_ready_to_enter_usb4() 315 * 316 */ 317 static bool is_cable_ready_to_enter_usb4(int port, int cnt) 318 { 319 /* TODO: USB4 enter mode for Active cables */ 320 struct pd_discovery *disc = &discovery[port][TCPC_TX_SOP_PRIME];
CID 1446361: Control flow issues (DEADCODE) Execution cannot reach the expression "get_usb_pd_cable_type(port) == IDH_PTYPE_PCABLE" inside this statement: "if (({
int __undefined = ...". 321 if (IS_ENABLED(CONFIG_USB_PD_USB4) && 322 (get_usb_pd_cable_type(port) == IDH_PTYPE_PCABLE) && 323 is_vdo_present(cnt, VDO_INDEX_PTYPE_CABLE1)) { 324 switch (cable[port].rev) { 325 case PD_REV30: 326 switch (disc->identity.product_t1.p_rev30.ss) {
** CID 1446360: Control flow issues (DEADCODE) /3rdparty/chromeec/common/motion_sense.c: 435 in motion_sense_switch_sensor_rate()
________________________________________________________________________________________________________ *** CID 1446360: Control flow issues (DEADCODE) /3rdparty/chromeec/common/motion_sense.c: 435 in motion_sense_switch_sensor_rate() 429 if (IS_ENABLED(CONFIG_GESTURE_DETECTION) && 430 (sensor_active == SENSOR_ACTIVE_S5)) { 431 uint32_t enabled = 0, disabled, mask; 432 433 mask = CONFIG_GESTURE_DETECTION_MASK; 434 while (mask) {
CID 1446360: Control flow issues (DEADCODE) Execution cannot reach this statement: "i = get_next_bit(&mask);".
435 i = get_next_bit(&mask); 436 sensor = &motion_sensors[i]; 437 if (sensor->state != SENSOR_INITIALIZED) 438 continue; 439 sensor->drv->list_activities(sensor, 440 &enabled, &disabled);
** CID 1446359: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /3rdparty/chromeec/common/i2c_controller.c: 545 in i2c_field_update8()
________________________________________________________________________________________________________ *** CID 1446359: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /3rdparty/chromeec/common/i2c_controller.c: 545 in i2c_field_update8() 539 rv = i2c_read8(port, slave_addr_flags, offset, &read_val); 540 if (rv) 541 return rv; 542 543 write_val = (read_val & (~field_mask)) | set_value; 544
CID 1446359: Integer handling issues (CONSTANT_EXPRESSION_RESULT) "({...; 0;}) && write_val == read_val" is always false regardless of the values of its operands. This occurs as the logical operand of "if".
545 if (IS_ENABLED(CONFIG_I2C_UPDATE_IF_CHANGED) && write_val == read_val) 546 return EC_SUCCESS; 547 548 return i2c_write8(port, slave_addr_flags, offset, write_val); 549 } 550
** CID 1446358: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /3rdparty/chromeec/common/main.c: 205 in main()
________________________________________________________________________________________________________ *** CID 1446358: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /3rdparty/chromeec/common/main.c: 205 in main() 199 #endif 200 #if defined(CONFIG_DEDICATED_RECOVERY_BUTTON) || defined(CONFIG_VOLUME_BUTTONS) 201 button_init(); 202 #endif /* defined(CONFIG_DEDICATED_RECOVERY_BUTTON | CONFIG_VOLUME_BUTTONS) */ 203 204 /* Make sure recovery boot won't be paused. */
CID 1446358: Integer handling issues (CONSTANT_EXPRESSION_RESULT) "({...; 0;}) && system_is_manual_recovery()" is always false regardless of the values of its operands. This occurs as the logical first operand of "&&".
205 if (IS_ENABLED(CONFIG_POWER_BUTTON_INIT_IDLE) 206 && system_is_manual_recovery() 207 && (system_get_reset_flags() & EC_RESET_FLAG_AP_IDLE)) { 208 CPRINTS("Clear AP_IDLE for recovery mode"); 209 system_clear_reset_flags(EC_RESET_FLAG_AP_IDLE); 210 }
** CID 1446357: Control flow issues (DEADCODE) /3rdparty/chromeec/common/usb_pd_host_cmd.c: 509 in hc_get_pd_port_caps()
________________________________________________________________________________________________________ *** CID 1446357: Control flow issues (DEADCODE) /3rdparty/chromeec/common/usb_pd_host_cmd.c: 509 in hc_get_pd_port_caps() 503 r->pd_try_power_role_cap = EC_PD_TRY_POWER_ROLE_SOURCE; 504 else 505 r->pd_try_power_role_cap = EC_PD_TRY_POWER_ROLE_NONE; 506 507 if (IS_ENABLED(CONFIG_USB_VPD) || 508 IS_ENABLED(CONFIG_USB_CTVPD))
CID 1446357: Control flow issues (DEADCODE) Execution cannot reach this statement: "r->pd_data_role_cap = EC_PD...".
509 r->pd_data_role_cap = EC_PD_DATA_ROLE_UFP; 510 else 511 r->pd_data_role_cap = EC_PD_DATA_ROLE_DUAL; 512 513 /* Allow boards to override the locations from UNKNOWN if desired */ 514 r->pd_port_location = board_get_pd_port_location(p->port);
** CID 1446356: (DEADCODE) /3rdparty/chromeec/util/genvif.c: 3165 in init_vif_component_usb_data_ufp_fields() /3rdparty/chromeec/util/genvif.c: 3170 in init_vif_component_usb_data_ufp_fields() /3rdparty/chromeec/util/genvif.c: 3150 in init_vif_component_usb_data_ufp_fields() /3rdparty/chromeec/util/genvif.c: 3160 in init_vif_component_usb_data_ufp_fields()
________________________________________________________________________________________________________ *** CID 1446356: (DEADCODE) /3rdparty/chromeec/util/genvif.c: 3165 in init_vif_component_usb_data_ufp_fields() 3159 break; 3160 case USB_GEN21: 3161 set_vif_field_itss(&vif_fields[Device_Speed], 3162 vif_component_name[Device_Speed], 3163 USB_GEN21, "USB 3.2 GEN 2x1"); 3164 break;
CID 1446356: (DEADCODE) Execution cannot reach this statement: "case USB_GEN12:".
3165 case USB_GEN12: 3166 set_vif_field_itss(&vif_fields[Device_Speed], 3167 vif_component_name[Device_Speed], 3168 USB_GEN12, "USB 3.2 GEN 1x2"); 3169 break; 3170 case USB_GEN22: /3rdparty/chromeec/util/genvif.c: 3170 in init_vif_component_usb_data_ufp_fields() 3164 break; 3165 case USB_GEN12: 3166 set_vif_field_itss(&vif_fields[Device_Speed], 3167 vif_component_name[Device_Speed], 3168 USB_GEN12, "USB 3.2 GEN 1x2"); 3169 break;
CID 1446356: (DEADCODE) Execution cannot reach this statement: "case USB_GEN22:".
3170 case USB_GEN22: 3171 set_vif_field_itss(&vif_fields[Device_Speed], 3172 vif_component_name[Device_Speed], 3173 USB_GEN22, "USB 3.2 GEN 2x2"); 3174 break; 3175 } /3rdparty/chromeec/util/genvif.c: 3150 in init_vif_component_usb_data_ufp_fields() 3144 &vif_fields[Device_Supports_USB_Data], 3145 &supports_usb_data)) 3146 supports_usb_data = false; 3147 3148 if (supports_usb_data) { 3149 switch (ds) {
CID 1446356: (DEADCODE) Execution cannot reach this statement: "case USB_2:".
3150 case USB_2: 3151 set_vif_field_itss(&vif_fields[Device_Speed], 3152 vif_component_name[Device_Speed], 3153 USB_2, "USB 2"); 3154 break; 3155 case USB_GEN11: /3rdparty/chromeec/util/genvif.c: 3160 in init_vif_component_usb_data_ufp_fields() 3154 break; 3155 case USB_GEN11: 3156 set_vif_field_itss(&vif_fields[Device_Speed], 3157 vif_component_name[Device_Speed], 3158 USB_GEN11, "USB 3.2 GEN 1x1"); 3159 break;
CID 1446356: (DEADCODE) Execution cannot reach this statement: "case USB_GEN21:".
3160 case USB_GEN21: 3161 set_vif_field_itss(&vif_fields[Device_Speed], 3162 vif_component_name[Device_Speed], 3163 USB_GEN21, "USB 3.2 GEN 2x1"); 3164 break; 3165 case USB_GEN12:
** CID 1446355: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /3rdparty/chromeec/common/keyboard_8042.c: 987 in send_aux_data_to_host_deferred()
________________________________________________________________________________________________________ *** CID 1446355: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /3rdparty/chromeec/common/keyboard_8042.c: 987 in send_aux_data_to_host_deferred() 981 if (IS_ENABLED(CONFIG_DEVICE_EVENT) && 982 chipset_in_state(CHIPSET_STATE_ANY_SUSPEND)) 983 device_set_single_event(EC_DEVICE_EVENT_TRACKPAD); 984 985 while (!queue_is_empty(&aux_to_host_queue)) { 986 queue_remove_unit(&aux_to_host_queue, &data);
CID 1446355: Integer handling issues (CONSTANT_EXPRESSION_RESULT) "aux_chan_enabled && ({...; 0;})" is always false regardless of the values of its operands. This occurs as the logical operand of "if".
987 if (aux_chan_enabled && IS_ENABLED(CONFIG_8042_AUX)) 988 i8042_send_to_host(1, &data, CHAN_AUX); 989 else 990 CPRINTS("AUX Callback ignored"); 991 } 992 }
** CID 1446354: Control flow issues (DEADCODE) /3rdparty/chromeec/common/usb_common.c: 459 in usb_mux_set_safe_mode()
________________________________________________________________________________________________________ *** CID 1446354: Control flow issues (DEADCODE) /3rdparty/chromeec/common/usb_common.c: 459 in usb_mux_set_safe_mode() 453 USB_SWITCH_CONNECT, 454 polarity_rm_dts(pd_get_polarity(port))); 455 } 456 457 /* Isolate the SBU lines. */ 458 if (IS_ENABLED(CONFIG_USBC_PPC_SBU))
CID 1446354: Control flow issues (DEADCODE) Execution cannot reach this statement: "ppc_set_sbu(port, 0);".
459 ppc_set_sbu(port, 0); 460 } 461 462 static void pd_send_hard_reset(int port) 463 { 464 task_set_event(PD_PORT_TO_TASK_ID(port), PD_EVENT_SEND_HARD_RESET, 0);
** CID 1446353: (PARSE_ERROR) /3rdparty/chromeec/driver/tcpm/tcpci.c: 28 in () /3rdparty/chromeec/driver/tcpm/tcpci.c: 30 in () /3rdparty/chromeec/driver/tcpm/tcpci.c: 28 in () /3rdparty/chromeec/driver/tcpm/tcpci.c: 28 in ()
________________________________________________________________________________________________________ *** CID 1446353: (PARSE_ERROR) /3rdparty/chromeec/driver/tcpm/tcpci.c: 28 in () 22 #include "usb_pd_tcpc.h" 23 #include "util.h" 24 25 #define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) 26 #define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) 27
CID 1446353: (PARSE_ERROR) expression must be an integral constant expression
28 STATIC_IF(CONFIG_USB_PD_DECODE_SOP) 29 bool sop_prime_en[CONFIG_USB_PD_PORT_MAX_COUNT]; 30 STATIC_IF(CONFIG_USB_PD_DECODE_SOP) 31 int rx_en[CONFIG_USB_PD_PORT_MAX_COUNT]; 32 33 #define TCPC_FLAGS_VSAFE0V(_flags) \ /3rdparty/chromeec/driver/tcpm/tcpci.c: 30 in () 24 25 #define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) 26 #define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) 27 28 STATIC_IF(CONFIG_USB_PD_DECODE_SOP) 29 bool sop_prime_en[CONFIG_USB_PD_PORT_MAX_COUNT];
CID 1446353: (PARSE_ERROR) expression must be an integral constant expression
30 STATIC_IF(CONFIG_USB_PD_DECODE_SOP) 31 int rx_en[CONFIG_USB_PD_PORT_MAX_COUNT]; 32 33 #define TCPC_FLAGS_VSAFE0V(_flags) \ 34 ((_flags & TCPC_FLAGS_TCPCI_REV2_0) && \ 35 !(_flags & TCPC_FLAGS_TCPCI_REV2_0_NO_VSAFE0V)) /3rdparty/chromeec/driver/tcpm/tcpci.c: 28 in () 22 #include "usb_pd_tcpc.h" 23 #include "util.h" 24 25 #define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) 26 #define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) 27
CID 1446353: (PARSE_ERROR) function call is not allowed in a constant expression
28 STATIC_IF(CONFIG_USB_PD_DECODE_SOP) 29 bool sop_prime_en[CONFIG_USB_PD_PORT_MAX_COUNT]; 30 STATIC_IF(CONFIG_USB_PD_DECODE_SOP) 31 int rx_en[CONFIG_USB_PD_PORT_MAX_COUNT]; 32 33 #define TCPC_FLAGS_VSAFE0V(_flags) \ /3rdparty/chromeec/driver/tcpm/tcpci.c: 28 in () 22 #include "usb_pd_tcpc.h" 23 #include "util.h" 24 25 #define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) 26 #define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) 27
CID 1446353: (PARSE_ERROR) expression must have integral type
28 STATIC_IF(CONFIG_USB_PD_DECODE_SOP) 29 bool sop_prime_en[CONFIG_USB_PD_PORT_MAX_COUNT]; 30 STATIC_IF(CONFIG_USB_PD_DECODE_SOP) 31 int rx_en[CONFIG_USB_PD_PORT_MAX_COUNT]; 32 33 #define TCPC_FLAGS_VSAFE0V(_flags) \
** CID 1446352: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /3rdparty/chromeec/common/motion_sense.c: 1101 in host_cmd_motion_sense()
________________________________________________________________________________________________________ *** CID 1446352: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /3rdparty/chromeec/common/motion_sense.c: 1101 in host_cmd_motion_sense() 1095 out->info_3.min_frequency = sensor->min_frequency; 1096 out->info_3.max_frequency = sensor->max_frequency; 1097 out->info_3.fifo_max_event_count = CONFIG_ACCEL_FIFO_SIZE; 1098 args->response_size = sizeof(out->info_3); 1099 } 1100 if (args->version >= 4) {
CID 1446352: Integer handling issues (CONSTANT_EXPRESSION_RESULT) "({...; 0;}) && sensor->drv->read_temp" is always false regardless of the values of its operands. This occurs as the logical operand of "if".
1101 if (IS_ENABLED(CONFIG_ONLINE_CALIB) && 1102 sensor->drv->read_temp) 1103 out->info_4.flags |= 1104 MOTION_SENSE_CMD_INFO_FLAG_ONLINE_CALIB; 1105 args->response_size = sizeof(out->info_4); 1106 }
** CID 1446351: Control flow issues (DEADCODE) /3rdparty/chromeec/common/usb_pd_policy.c: 422 in is_usb4_vdo()
________________________________________________________________________________________________________ *** CID 1446351: Control flow issues (DEADCODE) /3rdparty/chromeec/common/usb_pd_policy.c: 422 in is_usb4_vdo() 416 if (IS_PD_IDH_UFP_PTYPE(ptype)) { 417 /* 418 * Ref: USB Type-C Cable and Connector Specification 419 * Figure 5-1 USB4 Discovery and Entry Flow Model 420 * Device USB4 VDO detection. 421 */
CID 1446351: Control flow issues (DEADCODE) Execution cannot reach the expression "is_vdo_present(cnt, 4)" inside this statement: "return ({
int __undefined...". 422 return IS_ENABLED(CONFIG_USB_PD_USB4) && 423 is_vdo_present(cnt, VDO_INDEX_PTYPE_UFP1_VDO) && 424 PD_PRODUCT_IS_USB4(payload[VDO_INDEX_PTYPE_UFP1_VDO]); 425 } 426 return false; 427 }
** CID 1446350: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /3rdparty/chromeec/driver/charger/isl923x.c: 1027 in console_command_amon_bmon()
________________________________________________________________________________________________________ *** CID 1446350: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /3rdparty/chromeec/driver/charger/isl923x.c: 1027 in console_command_amon_bmon() 1021 int chgnum = 0; 1022 char *e; 1023 1024 if (argc >= 2) { 1025 print_ac = (argv[1][0] == 'a'); 1026 print_battery = (argv[1][0] == 'b');
CID 1446350: Integer handling issues (CONSTANT_EXPRESSION_RESULT) "({...; 0;}) && argv[1][1] != 0" is always false regardless of the values of its operands. This occurs as the logical operand of "if".
1027 if (IS_ENABLED(CHARGER_ISL9238X) && argv[1][1] != '\0') { 1028 print_charge = (argv[1][1] == 'c'); 1029 print_discharge = (argv[1][1] == 'd'); 1030 } 1031 if (argc >= 3) { 1032 chgnum = strtoi(argv[2], &e, 10);
** CID 1446349: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /3rdparty/chromeec/common/i2c_controller.c: 331 in platform_ec_i2c_write()
________________________________________________________________________________________________________ *** CID 1446349: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /3rdparty/chromeec/common/i2c_controller.c: 331 in platform_ec_i2c_write() 325 const uint16_t slave_addr_flags, 326 const uint8_t *out, int out_size) 327 { 328 if (!IS_ENABLED(CONFIG_SMBUS_PEC) && I2C_USE_PEC(slave_addr_flags)) 329 return EC_ERROR_UNIMPLEMENTED; 330
CID 1446349: Integer handling issues (CONSTANT_EXPRESSION_RESULT) "({...; 0;}) && slave_addr_flags & (8192U /* 1U << 13 */)" is always false regardless of the values of its operands. This occurs as the logical operand of "if".
331 if (IS_ENABLED(CONFIG_SMBUS_PEC) && I2C_USE_PEC(slave_addr_flags)) { 332 int i, rv; 333 uint8_t addr_8bit = I2C_STRIP_FLAGS(slave_addr_flags) << 1; 334 uint8_t pec; 335 336 pec = cros_crc8(&addr_8bit, 1);
** CID 1446348: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /3rdparty/chromeec/common/gpio.c: 209 in gpio_or_ioex_set_level()
________________________________________________________________________________________________________ *** CID 1446348: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /3rdparty/chromeec/common/gpio.c: 209 in gpio_or_ioex_set_level() 203 cprints(channel, "Set %s: %d", gpio_get_name(signal), value); 204 gpio_set_level(signal, value); 205 } 206 207 void gpio_or_ioex_set_level(int signal, int value) 208 {
CID 1446348: Integer handling issues (CONSTANT_EXPRESSION_RESULT) "({...; 0;}) && signal_is_ioex(signal)" is always false regardless of the values of its operands. This occurs as the logical operand of "if".
209 if (IS_ENABLED(CONFIG_IO_EXPANDER) && signal_is_ioex(signal)) 210 ioex_set_level(signal, value); 211 else 212 gpio_set_level(signal, value); 213 } 214
________________________________________________________________________________________________________ To view the defects in Coverity Scan visit, https://u15810271.ct.sendgrid.net/ls/click?upn=HRESupC-2F2Czv4BOaCWWCy7my0P0...
-
scan-admin＠coverity.com