I am bouncing this to the LinuxBIOS list because most of the discusion happens there. And I am extremely busy at the moment.
Rudolf Marek MAREKR2@cs.felk.cvut.cz writes:
Hello,
I have ASUS A7S333 (Sis745).
On I2C I got only one winbond chip and one unknown device. No SPD eeprom no PLL.
I read somewhere that you are curios to know if other ASUS mainboards got this feature. So here is my answer.
I want to enable the SPD i2c in case I can read the SPD timings. (I wrote i2c driver patch for my 745 into lm_sensors, ten to my surprise theese SPD and PLL devices "missing")
Unfortunatelly I dont have SiS745 spec so I dont know where to trigger this back. Would you give me some hint please?
The only hint I have is that boards like this tend to have a mux on the i2c line. Either controlled by a gpio line. Or I have seen the controlled by an i2c device.
Thank you.
Rudolf Marek
CTU prague student.
Welcome,
Eric