Fwd: coreboot on "acer aspire 1520"

[Paweł Stawicki]

I must  finally learn how to handle mail's :)

---------- Forwarded message ----------
From: Paweł Stawicki 
Date: 2010/3/22
Subject: Re: [coreboot] coreboot on "acer aspire 1520"
To: Stefan Reinauer

This is what I get with the original bios:

[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1800.964 MHz processor.

[    0.004000] Console: colour dummy device 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[    0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[    0.004000] allocated 2618560 bytes of page_cgroup

[    0.004000] please try cgroup_disable=memory option if you don't want
[    0.004000] Scanning for low memory corruption every 60 seconds
[    0.004000] Memory: 500840k/523712k available (4126k kernel code, 22204k
reserved, 2208k data, 532k init, 0k highmem)

[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
[    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.004000]     vmalloc : 0xe0770000 - 0xff3fe000   ( 492 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xdff70000   ( 511 MB)
[    0.004000]       .init : 0xc0737000 - 0xc07bc000   ( 532 kB)
[    0.004000]       .data : 0xc0507a6f - 0xc072fe60   (2208 kB)
[    0.004000]       .text : 0xc0100000 - 0xc0507a6f   (4126 kB)

[    0.004000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0,
CPUs=1, Nodes=1
[    0.004011] Calibrating delay loop (skipped), value calculated using
timer frequency.. 3601.92 BogoMIPS (lpj=7203856)
[    0.004035] Security Framework initialized
[    0.004045] SELinux:  Disabled at boot.
[    0.004068] AppArmor: AppArmor initialized
[    0.004079] Mount-cache hash table entries: 512
[    0.004204] Initializing cgroup subsys ns
[    0.004210] Initializing cgroup subsys cpuacct
[    0.004215] Initializing cgroup subsys memory
[    0.004222] Initializing cgroup subsys freezer
[    0.004236] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[    0.004242] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.004256] Checking 'hlt' instruction... OK.
[    0.020601] SMP alternatives: switching to UP code
[    0.150612] Freeing SMP alternatives: 18k freed
[    0.150621] ACPI: Core revision 20080926
[    0.152800] ACPI: Checking initramfs for custom DSDT
[    0.464994] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.506770] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 0a
[    0.508002] Brought up 1 CPUs
[    0.508002] Total of 1 processors activated (3601.92 BogoMIPS).

The coreboot kernel is started with parameters:
 /boot/vmlinuz-2.6.28.10  ro earlyprintk=serial,0x2f8,9600n8,keep no-hlt
noapic acpi=off

I'm attaching the full coreboot log,
enriched with additional comments :)