[LinuxBIOS] build failure with r2728 - coreboot

21 Jun 2007


      Hi, I can't build the linuxBIOS to my Tyan s2875. I have tried 2 gcc
version : 4.0.4 on ubuntu x86_64 and the 4.2.0 on archlinux i686. It's
the same error :
gcc -m32 -c  -I/home/adrian/LinuxBIOSv2-2728/src/include
-I/home/adrian/LinuxBIO Sv2-2728/src/arch/i386/include -I -DARCH='i386'
-DHAVE_MOVNTI='1' -DCROSS_COMPIL E -DCC='gcc -m32' -DHOSTCC='gcc'
-DOBJCOPY='objcopy --gap-fill 0xff' -DLINUXBIOS _VERSION='"2.0.0"'
-DLINUXBIOS_BUILD='"jeudi 21 juin 2007, 18:21:32 (UTC+0200)"'
-DLINUXBIOS_COMPILE_TIME='"18:21:32"' -DLINUXBIOS_COMPILE_BY='"adrian"'
-DLINUX BIOS_COMPILE_HOST='"opteron"' -DLINUXBIOS_COMPILE_DOMAIN='""'
-DLINUXBIOS_COMPIL ER='"version gcc 4.0.3 (Ubuntu 4.0.3-1ubuntu5)"'
-DLINUXBIOS_LINKER='"GNU ld ver sion 2.16.91 20060118 Debian GNU/Linux"'
-DLINUXBIOS_ASSEMBLER='"assembleur GNU version 2.16.91
(x86_64-linux-gnu) utilisant BFD version 2.16.91 20060118 Debian
GNU/Linux"' -DCONFIG_USE_INIT='0' -DHAVE_FALLBACK_BOOT='1'
-DHAVE_FAILOVER_BOOT ='0' -DROM_IMAGE_SIZE='0x20000'
-DPAYLOAD_SIZE='0x14000' -D_ROMBASE='0xfffa0000'  -D_RESET='0xfffa0000'
-D_EXCEPTION_VECTORS='0xfffa0100' -DSTACK_SIZE='0x2000' -
DHEAP_SIZE='0x4000' -D_RAMBASE='0x4000' -DUSE_DCACHE_RAM='1'
-DDCACHE_RAM_BASE=' 0xcf000' -DDCACHE_RAM_SIZE='0x1000'
-DDCACHE_RAM_GLOBAL_VAR_SIZE='0x0' -DCONFIG_ AP_CODE_IN_CAR='0'
-DMEM_TRAIN_SEQ='0' -DWAIT_BEFORE_CPUS_INIT='0' -DCONFIG_COMP RESS='1'
-DCONFIG_UNCOMPRESSED='0' -DCONFIG_LB_MEM_TOPK='2048' -DHAVE_OPTION_TAB
LE='1' -DUSE_OPTION_TABLE='1' -DLB_CKS_RANGE_START='49'
-DLB_CKS_RANGE_END='122'  -DLB_CKS_LOC='123'
-DCRT0='/home/adrian/LinuxBIOSv2-2728/src/arch/i386/init/crt 0.S.lb'
-DDEBUG='1' -DCONFIG_CONSOLE_VGA='1' -DCONFIG_CONSOLE_VGA_MULTI='0' -DCO
NFIG_CONSOLE_VGA_ONBOARD_AT_FIRST='0' -DCONFIG_CONSOLE_BTEXT='0'
-DCONFIG_CONSOL E_LOGBUF='0' -DCONFIG_CONSOLE_SROM='0'
-DCONFIG_CONSOLE_SERIAL8250='1' -DCONFIG_ USBDEBUG_DIRECT='0'
-DDEFAULT_CONSOLE_LOGLEVEL='8' -DMAXIMUM_CONSOLE_LOGLEVEL='8 '
-DCONFIG_SERIAL_POST='0' -DTTYS0_BASE='0x3f8' -DTTYS0_BAUD='115200'
-DTTYS0_LC S='0x3' -DCONFIG_USE_PRINTK_IN_CAR='0'
-DMAINBOARD='/home/adrian/LinuxBIOSv2-272 8/src/mainboard/tyan/s2875'
-DMAINBOARD_PART_NUMBER='"s2875"' -DMAINBOARD_VENDOR ='"Tyan"'
-DMAINBOARD_PCI_SUBSYSTEM_VENDOR_ID='4337' -DMAINBOARD_PCI_SUBSYSTEM_D
EVICE_ID='0x2875' -DCONFIG_MAX_PCI_BUSES='255' -DCONFIG_SMP='1'
-DCONFIG_MAX_CPU S='4' -DCONFIG_MAX_PHYSICAL_CPUS='2'
-DCONFIG_LOGICAL_CPUS='1' -DSERIAL_CPU_INIT ='1' -DAPIC_ID_OFFSET='0'
-DENABLE_APIC_EXT_ID='0' -DLIFT_BSP_APIC_ID='0' -DCONF
IG_IDE_PAYLOAD='0' -DCONFIG_ROM_PAYLOAD='1'
-DCONFIG_ROM_PAYLOAD_START='0xfff8c0 00'
-DCONFIG_COMPRESSED_PAYLOAD_NRV2B='0'
-DCONFIG_COMPRESSED_PAYLOAD_LZMA='0' - DCONFIG_PRECOMPRESSED_PAYLOAD='0'
-DCONFIG_SERIAL_PAYLOAD='0' -DCONFIG_FS_PAYLOA D='0'
-DCONFIG_FS_EXT2='0' -DCONFIG_FS_ISO9660='0' -DCONFIG_FS_FAT='0'
-DAUTOBOO T_DELAY='2' -DAUTOBOOT_CMDLINE='"hdc1:/vmlinuz root=/dev/hdc3
console=tty0 conso le=ttyS0,115200"' -DUSE_WATCHDOG_ON_BOOT='0'
-DCONFIG_HYPERTRANSPORT_PLUGIN_SUPP ORT='1'
-DCONFIG_AGP_PLUGIN_SUPPORT='1' -DCONFIG_CARDBUS_PLUGIN_SUPPORT='1' -DCO
NFIG_PCIX_PLUGIN_SUPPORT='1' -DCONFIG_PCIEXP_PLUGIN_SUPPORT='1'
-DCONFIG_IDE='0'  -DIDE_BOOT_DRIVE='0' -DIDE_OFFSET='0'
-DPCI_IO_CFG_EXT='0' -DCONFIG_CHIP_NAME=' 1' -DHAVE_INIT_TIMER='1'
-DMAX_REBOOT_CNT='3' -DFAKE_SPDROM='0' -DHAVE_ACPI_TABL ES='0'
-DACPI_SSDTX_NUM='0' -DHT_CHAIN_UNITID_BASE='1'
-DHT_CHAIN_END_UNITID_BAS E='32' -DSB_HT_CHAIN_UNITID_OFFSET_ONLY='1'
-DSB_HT_CHAIN_ON_BUS0='0' -DPCI_BUS_ SEGN_BITS='0' -DMMCONF_SUPPORT='0'
-DHW_MEM_HOLE_SIZEK='1048576' -DHW_MEM_HOLE_S IZE_AUTO_INC='0'
-DK8_HT_FREQ_1G_SUPPORT='0' -DK8_REV_F_SUPPORT='0' -DCBB='0' -D CDB='24'
-DDIMM_SUPPORT='0x108' -DCPU_SOCKET_TYPE='16' -DCPU_ADDR_BITS='40' -DCO
NFIG_PCI_ROM_RUN='1' -DCONFIG_PCI_64BIT_PREF_MEM='0' -DCONFIG_AGESA='0'
-DHAVE_M P_TABLE='1' -DHAVE_PIRQ_TABLE='1' -DUSE_FALLBACK_IMAGE='0'
-DHAVE_HARD_RESET='1'  -DIRQ_SLOT_COUNT='13' -DCONFIG_IOAPIC='1'
-DFALLBACK_SIZE='0x40000' -DROM_SIZE= '0x74000'
-DROM_SECTION_SIZE='0x34000' -DROM_SECTION_OFFSET='0x0' -DXIP_ROM_SIZE
='0x20000' -DXIP_ROM_BASE='0xfffa0000'
-DLINUXBIOS_EXTRA_VERSION='"_Normal"' -DM
AINBOARD_POWER_ON_AFTER_POWER_FAIL='MAINBOARD_POWER_ON'
-DCONFIG_GDB_STUB='0' -D CONFIG_UDELAY_IO='0' -DUSE_FAILOVER_IMAGE='0'
-DCONFIG_UDELAY_TSC='0' -DCONFIG_T SC_X86RDTSC_CALIBRATE_WITH_TIMER2='0'
-DAGP_APERTURE_SIZE='0x4000000' -Os -nostd inc -nostdlib -fno-builtin
-Wall -o printk.o /home/adrian/LinuxBIOSv2-2728/src/ console/printk.c
/home/adrian/LinuxBIOSv2-2728/src/console/printk.c:8:20: erreur:
stdarg.h : Aucu n fichier ou répertoire de ce type
/home/adrian/LinuxBIOSv2-2728/src/console/printk.c:26: erreur: syntax
error befo re «va_list»
/home/adrian/LinuxBIOSv2-2728/src/console/printk.c: Dans la fonction
«do_printk»  :
/home/adrian/LinuxBIOSv2-2728/src/console/printk.c:32: erreur: «va_list»
undecla red (first use in this function)
/home/adrian/LinuxBIOSv2-2728/src/console/printk.c:32: erreur: (Chaque
identific ateur non déclaré est rapporté une seule fois
/home/adrian/LinuxBIOSv2-2728/src/console/printk.c:32: erreur: pour
chaque fonct ion dans laquelle il apparaît.)
/home/adrian/LinuxBIOSv2-2728/src/console/printk.c:32: erreur: syntax
error befo re «args»
/home/adrian/LinuxBIOSv2-2728/src/console/printk.c:41: attention :
implicit decl aration of function «va_start»
/home/adrian/LinuxBIOSv2-2728/src/console/printk.c:41: erreur: «args»
undeclared  (first use in this function)
/home/adrian/LinuxBIOSv2-2728/src/console/printk.c:43: attention :
implicit decl aration of function «va_end»
make[1]: *** [printk.o] Erreur 1
make[1]: quittant le répertoire
« /home/adrian/LinuxBIOSv2-2728/targets/tyan/s28 75/s2875/normal »
make: *** [normal/linuxbios.rom] Erreur 1
PS : I do exactly the same with or without payload