Coreboot and Epia M-II

[Elisenda Cuadros]

Hello,

First of all I am new to the list. Congratulations to all developers for 
this great work.

I have an Epia M-II and I want to install coreboot on it. This board is 
supported, great news!.

I extracted the vga rom with bios_extract (CLE1622A.rom) and I put it 
inside menuconfig (pci 1106,3122).

I built Seabios with Coreboot and attached a bootorder file with cbfstool.

When I try boot the board with the resulting rom it seems like it´s in a 
loop. The VGA output is not good. I am not able to view any payload 
messages.

I am using coreboot v4 from git.

Because of it is my first experience with coreboot I don´t have any 
ideas for what is causing of the problem. I attach you it if you want to 
take a look.

Thanks in advance.

Best regards,

Elisenda

[QingPei Wang]

hi elisenda,
  how did you build the seabios? what do you mean by "attached a bootorder
file with cbfstool"?
the log shows that the payload could not be executed correctly.

Best wishes
QingPei Wang
Phone: 86+018930528086

On Wed, Nov 2, 2011 at 3:25 AM, Elisenda Cuadros  wrote:
> Hello,
>
> First of all I am new to the list. Congratulations to all developers for
> this great work.
>
> I have an Epia M-II and I want to install coreboot on it. This board is
> supported, great news!.
>
> I extracted the vga rom with bios_extract (CLE1622A.rom) and I put it
> inside menuconfig (pci 1106,3122).
>
> I built Seabios with Coreboot and attached a bootorder file with cbfstool.
>
> When I try boot the board with the resulting rom it seems like it´s in a
> loop. The VGA output is not good. I am not able to view any payload
> messages.
>
> I am using coreboot v4 from git.
>
> Because of it is my first experience with coreboot I don´t have any ideas
> for what is causing of the problem. I attach you it if you want to take a
> look.
>
> Thanks in advance.
>
> Best regards,
>
> Elisenda