hi elisenda,
  how did you build the seabios? what do you mean by "attached a bootorder file with cbfstool"?
the log shows that the payload could not be executed correctly.



Best wishes
QingPei Wang
Phone: 86+018930528086


On Wed, Nov 2, 2011 at 3:25 AM, Elisenda Cuadros <lists@e4l.es> wrote:
Hello,

First of all I am new to the list. Congratulations to all developers for this great work.

I have an Epia M-II and I want to install coreboot on it. This board is supported, great news!.

I extracted the vga rom with bios_extract (CLE1622A.rom) and I put it inside menuconfig (pci 1106,3122).

I built Seabios with Coreboot and attached a bootorder file with cbfstool.

When I try boot the board with the resulting rom it seems like it´s in a loop. The VGA output is not good. I am not able to view any payload messages.

I am using coreboot v4 from git.

Because of it is my first experience with coreboot I don´t have any ideas for what is causing of the problem. I attach you it if you want to take a look.

Thanks in advance.

Best regards,

Elisenda



--
coreboot mailing list: coreboot@coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot