Thanks, that is what I am missing.
I have a configuration derived from src/soc/intel/baytrail and didn't notice the new selections.
Sean
On 05/11/2014 10:52 AM, Furquan Shaikh wrote:
Ah okay!
- What board are you trying this for? Does it use a different cpu /
soc than the ones for which we have support upstream?
- The variables ARCH-*-y depend on the config variables ARCH_*_X86_32
selected in cpu/soc specific Kconfig files. E.g.: In file src/cpu/intel/haswell/Kconfig, the options selected are: select ARCH_BOOTBLOCK_X86_32 select ARCH_ROMSTAGE_X86_32 select ARCH_RAMSTAGE_X86_32
Make sure that architecture is specified for each of the three stages i.e. bootblock, romstage and ramstage.
On Sat, May 10, 2014 at 8:18 PM, Sean McNeil <seanmcneil3@gmail.com mailto:seanmcneil3@gmail.com> wrote:
The below commit has already been merged and does not resolve the issue. My /bin/sh is also a symlink to bash. It appears to be 2 things: 1) I don't have the following definitions anywhere ARCH-BOOTBLOCK-y := i386 ARCH-ROMSTAGE-y := i386 ARCH-RAMSTAGE-y := i386 this is what causes the command not found problems. 2) target build/cbfs/fallback/bootblock.bin is missing. It looks the same in the older codebase Makefile.inc and perhaps is a side-affect of the bootblock class? On 05/11/2014 01:10 AM, Furquan Shaikh wrote:
This CL has been submitted which should fix the issue: http://review.coreboot.org/#/c/5701/ On Saturday, May 10, 2014 3:02:44 AM, Sean McNeil <seanmcneil3@gmail.com <mailto:seanmcneil3@gmail.com>> wrote: Up until recently, compiling coreboot with the options CONFIG_COMPILER_GCC=y CONFIG_ANY_TOOLCHAIN=y on a 64-bit linux system worked just fine. Over the last few days I now get the errors: make Warning: no suitable GCC for armv7. Warning: no suitable GCC for aarch64. /bin/sh: -print-libgcc-file-name: command not found /bin/sh: -print-libgcc-file-name: command not found /bin/sh: -print-libgcc-file-name: command not found /bin/sh: -print-libgcc-file-name: command not found /bin/sh: -print-libgcc-file-name: command not found /bin/sh: -print-libgcc-file-name: command not found # # configuration written to .config # make: *** No rule to make target `build/cbfs/fallback/bootblock.bin', needed by `build/coreboot.pre1'. Stop. -- coreboot mailing list: coreboot@ <mailto:coreboot@coreboot.org>coreboot.org <mailto:coreboot@coreboot.org> http:// <http://www.coreboot.org/mailman/listinfo/coreboot>www.coreboot.org <http://www.coreboot.org/mailman/listinfo/coreboot>/mailman/ <http://www.coreboot.org/mailman/listinfo/coreboot>listinfo <http://www.coreboot.org/mailman/listinfo/coreboot>/coreboot <http://www.coreboot.org/mailman/listinfo/coreboot>