[commit] r6008 - trunk/src/northbridge/amd/gx2

[repository service]

Author: uwe
Date: Mon Nov  1 15:18:11 2010
New Revision: 6008
URL: https://tracker.coreboot.org/trac/coreboot/changeset/6008

Log:
GX2: Change MSR register numbers into more descriptive names.

Signed-off-by: Nils Jacobs 
Acked-by: Uwe Hermann

Modified:
   trunk/src/northbridge/amd/gx2/raminit.c

Modified: trunk/src/northbridge/amd/gx2/raminit.c
==============================================================================
--- trunk/src/northbridge/amd/gx2/raminit.c	Mon Nov  1 00:24:18 2010	(r6007)
+++ trunk/src/northbridge/amd/gx2/raminit.c	Mon Nov  1 15:18:11 2010	(r6008)
@@ -12,31 +12,31 @@
    msr_t msr;

/* 2. clock gating for PMode */
-	msr = rdmsr(0x20002004);
+	msr = rdmsr(MC_GLD_MSR_PM);
    msr.lo &= ~0x04;
    msr.lo |=  0x01;
-	wrmsr(0x20002004, msr);
+	wrmsr(MC_GLD_MSR_PM, msr);
    /* undocmented bits in GX, in LX there are
     * 8 bits in PM1_UP_DLY */
-	msr = rdmsr(0x2000001a);
+	msr = rdmsr(MC_CF1017_DATA);
    msr.lo = 0x0101;
-	wrmsr(0x2000001a, msr);
+	wrmsr(MC_CF1017_DATA, msr);
    //print_debug("sdram_enable step 2\n");

/* 3. release CKE mask to enable CKE */
-	msr = rdmsr(0x2000001d);
+	msr = rdmsr(MC_CFCLK_DBUG);
    msr.lo &= ~(0x03 << 8);
-	wrmsr(0x2000201d, msr);
+	wrmsr(MC_CFCLK_DBUG, msr);
    //print_debug("sdram_enable step 3\n");

/* 4. set and clear REF_TST 16 times, more shouldn't hurt
     * why this is before EMRS and MRS ? */
    for (i = 0; i < 19; i++) {
-		msr = rdmsr(0x20000018);
+		msr = rdmsr(MC_CF07_DATA);
    	msr.lo |=  (0x01 << 3);
-		wrmsr(0x20000018, msr);
+		wrmsr(MC_CF07_DATA, msr);
    	msr.lo &= ~(0x01 << 3);
-		wrmsr(0x20000018, msr);
+		wrmsr(MC_CF07_DATA, msr);
    }
    //print_debug("sdram_enable step 4\n");

@@ -53,29 +53,29 @@
    //print_debug("sdram_enable step 5\n");

/* 6. enable DLL, load Extended Mode Register by set and clear PROG_DRAM */
-	msr = rdmsr(0x20000018);
+	msr = rdmsr(MC_CF07_DATA);
    msr.lo |=  ((0x01 << 28) | 0x01);
-	wrmsr(0x20000018, msr);
+	wrmsr(MC_CF07_DATA, msr);
    msr.lo &= ~((0x01 << 28) | 0x01);
-	wrmsr(0x20000018, msr);
+	wrmsr(MC_CF07_DATA, msr);
    //print_debug("sdram_enable step 6\n");

/* 7. Reset DLL, Bit 27 is undocumented in GX datasheet,
     * it is documented in LX datasheet  */
    /* load Mode Register by set and clear PROG_DRAM */
-	msr = rdmsr(0x20000018);
+	msr = rdmsr(MC_CF07_DATA);
    msr.lo |=  ((0x01 << 27) | 0x01);
-	wrmsr(0x20000018, msr);
+	wrmsr(MC_CF07_DATA, msr);
    msr.lo &= ~((0x01 << 27) | 0x01);
-	wrmsr(0x20000018, msr);
+	wrmsr(MC_CF07_DATA, msr);
    //print_debug("sdram_enable step 7\n");

/* 8. load Mode Register by set and clear PROG_DRAM */
-	msr = rdmsr(0x20000018);
+	msr = rdmsr(MC_CF07_DATA);
    msr.lo |=  0x01;
-	wrmsr(0x20000018, msr);
+	wrmsr(MC_CF07_DATA, msr);
    msr.lo &= ~0x01;
-	wrmsr(0x20000018, msr);
+	wrmsr(MC_CF07_DATA, msr);
    //print_debug("sdram_enable step 8\n");

/* wait 200 SDCLKs */
@@ -83,7 +83,7 @@
    	outb(0xaa, 0x80);

/* load RDSYNC */
-	msr = rdmsr(0x2000001f);
+	msr = rdmsr(MC_CF_RDSYNC);
    msr.hi = 0x000ff310;
    /* the above setting is supposed to be good for "slow" ram. We have found that for
     * some dram, at some clock rates, e.g. hynix at 366/244, this will actually
@@ -94,13 +94,13 @@
     */
    msr.hi = 0x00000310;
    msr.lo = 0x00000000;
-	wrmsr(0x2000001f, msr);
+	wrmsr(MC_CF_RDSYNC, msr);

/* set delay control */
-	msr = rdmsr(0x4c00000f);
+	msr = rdmsr(GLCP_DELAY_CONTROLS);
    msr.hi = 0x830d415a;
    msr.lo = 0x8ea0ad6a;
-	wrmsr(0x4c00000f, msr);
+	wrmsr(GLCP_DELAY_CONTROLS, msr);

/* The RAM dll needs a write to lock on so generate a few dummy writes */
    /* Note: The descriptor needs to be enabled to point at memory */