[commit] r5234 - trunk/src/southbridge/amd/cs5530

[repository service]

Author: stepan
Date: Wed Mar 17 02:22:01 2010
New Revision: 5234
URL: https://tracker.coreboot.org/trac/coreboot/changeset/5234

Log:
remove warnings from cs5530 driver. (trivial)

Signed-off-by: Stefan Reinauer 
Acked-by: Stefan Reinauer

Modified:
   trunk/src/southbridge/amd/cs5530/cs5530_vga.c

Modified: trunk/src/southbridge/amd/cs5530/cs5530_vga.c
==============================================================================
--- trunk/src/southbridge/amd/cs5530/cs5530_vga.c	Wed Mar 17 02:18:14 2010	(r5233)
+++ trunk/src/southbridge/amd/cs5530/cs5530_vga.c	Wed Mar 17 02:22:01 2010	(r5234)
@@ -237,7 +237,7 @@
  *
  * The PLL to program here is located in the CS5530
  */
-static void cs5530_set_clock_frequency(void *io_base, unsigned long pll_val)
+static void cs5530_set_clock_frequency(u32 io_base, unsigned long pll_val)
 {
    unsigned long reg;

@@ -282,7 +282,7 @@
  * - 2 (=2MiB) for XGA
  * - 4 (=4MiB) for SXGA
  */
-static void dc_setup_layout(void *gx_base, const struct video_mode *mode)
+static void dc_setup_layout(u32 gx_base, const struct video_mode *mode)
 {
    u32 base = 0x00000000;

@@ -323,7 +323,7 @@
  * |#####################################___________________________| line data
  * |______________________________________________---------_________| YSYNC
  */
-static void dc_setup_timing(void *gx_base, const struct video_mode *mode)
+static void dc_setup_timing(u32 gx_base, const struct video_mode *mode)
 {
    u32 hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal;
    u32 vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
@@ -367,7 +367,7 @@
  * Must be setup in Geode GX1's chipset.
  * Note: This routine assumes unlocked DC registers.
  */
-static void cs5530_activate_mode(void *gx_base, const struct video_mode *mode)
+static void cs5530_activate_mode(u32 gx_base, const struct video_mode *mode)
 {
    write32(gx_base + DC_GENERAL_CFG, 0x00000080);
    mdelay(1);
@@ -387,7 +387,7 @@
  * As we now activate the interface this must be done
  * in the CS5530
  */
-static void cs5530_activate_video(void *io_base, const struct video_mode *mode)
+static void cs5530_activate_video(u32 io_base, const struct video_mode *mode)
 {
    u32 val;

@@ -454,10 +454,10 @@
 static void cs5530_vga_init(device_t dev)
 {
    const struct video_mode *mode;
-	void *io_base, *gx_base;
+	u32 io_base, gx_base;

-	io_base = (void*)pci_read_config32(dev, 0x10);
-	gx_base = (void*)GX_BASE;
+	io_base = pci_read_config32(dev, 0x10);
+	gx_base = GX_BASE;
    mode = modes[CONFIG_GX1_VIDEOMODE];

printk_debug("Setting up video mode %dx%d with %d Hz clock\n",