Re: [LinuxBIOS] r2675 - trunk/LinuxBIOSv2/src/mainboard/tyan/s2881

[Ward Vandewege]

On Sat, May 19, 2007 at 07:28:40PM +0200, [e-mail] wrote:
> /* The following is a little silly. We need a hook into the boot process *after*
> * the ADT7643 device has been initialized. So we create this dummy device, and we 
> * put the ADT7643 s2881 specific settings in its init function, which gets called
> /* The following is a little silly. We need a hook into the boot
> * process *after* the ADT7643 device has been initialized. So we
> * create this dummy device, and we put the ADT7643 S2881 specific
> * settings in its init function, which gets called
> as the last device to be initialized.

These should all be ADT7463, rather than ADT7643. Can you fix that?

Thanks,
Ward.

[LinuxBIOS] r2675 - trunk/LinuxBIOSv2/src/mainboard/tyan/s2881

[Uwe Hermann]

On Sat, May 19, 2007 at 01:38:37PM -0400, Ward Vandewege wrote:
> On Sat, May 19, 2007 at 07:28:40PM +0200, [e-mail] wrote:
> > /* The following is a little silly. We need a hook into the boot process *after*
> > * the ADT7643 device has been initialized. So we create this dummy device, and we 
> > * put the ADT7643 s2881 specific settings in its init function, which gets called
> > /* The following is a little silly. We need a hook into the boot
> > * process *after* the ADT7643 device has been initialized. So we
> > * create this dummy device, and we put the ADT7643 S2881 specific
> > * settings in its init function, which gets called
> > as the last device to be initialized.
>
> These should all be ADT7463, rather than ADT7643. Can you fix that?

Sure, done.

Uwe.