Kerry Sheh (shekairui@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/543
-gerrit
commit b25d3f7d2c52345353f9c62eb89a0bf333e4b94b Author: Kerry Sheh shekairui@gmail.com Date: Wed Jan 18 16:10:45 2012 +0800
Inagua: mainboard specific GPIO setting
Pcie device connected to Hudson/sb800 southbridge GPP training can works, by applying this mainbaind specific GPIO PCIE De-Assert setting.
Change-Id: I563b2e6354a958a28f5d0162e7a4d60aa437fb9b Signed-off-by: Kerry Sheh shekairui@gmail.com Signed-off-by: Kerry Sheh kerry.she@amd.com --- src/mainboard/amd/inagua/mainboard.c | 28 +++++++++++++++++++++++++++- 1 files changed, 27 insertions(+), 1 deletions(-)
diff --git a/src/mainboard/amd/inagua/mainboard.c b/src/mainboard/amd/inagua/mainboard.c index 1fd5fae..89a3c6b 100644 --- a/src/mainboard/amd/inagua/mainboard.c +++ b/src/mainboard/amd/inagua/mainboard.c @@ -26,6 +26,7 @@ #include <cpu/amd/mtrr.h> #include <device/pci_def.h> //#include <southbridge/amd/sb800/sb800.h> +#include "SBPLATFORM.h" /* Platfrom Specific Definitions */ #include "chip.h"
void set_pcie_reset(void); @@ -40,11 +41,34 @@ void set_pcie_reset(void) }
/** - * TODO * mainboard specific SB CIMx callback */ void set_pcie_dereset(void) { + /** + * GPIO32 Pcie Device DeAssert for APU + * GPIO25 Pcie LAN, APU GPP2 + * GPIO02 MINIPCIE SLOT1, APU GPP3 + * GPIO50 Pcie Device DeAssert for Hudson Southbridge + * GPIO05 Express Card, SB GPP0 + * GPIO26 NEC USB3.0GPPUSB, SB GPP1 + * GPIO00 MINIPCIE SLOT2, SB GPP2 + * GPIO05 Pcie X1 Slot, SB GPP3 + */ + + /* Multi-function pins switch to GPIO0-35, these pins are shared with + * PCI pins, make sure Husson PCI device is disabled. + */ + RWMEM(ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEA, AccWidthUint8, ~BIT0, 1); + + /* select IOMux to function1/2, corresponds to GPIO */ + RWMEM(ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG32, AccWidthUint8, ~(BIT0 | BIT1), 1); + RWMEM(ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG50, AccWidthUint8, ~(BIT0 | BIT1), 2); + + + /* output low */ + RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG32, AccWidthUint8, ~(0xFF), 0x48); + RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG50, AccWidthUint8, ~(0xFF), 0x48); }
uint64_t uma_memory_base, uma_memory_size; @@ -95,6 +119,8 @@ static void inagua_enable(device_t dev) uma_memory_base = 0x30000000; /* 1GB system memory supported */ #endif
+ /* Inagua mainboard specific setting */ + set_pcie_dereset(); }
int add_mainboard_resources(struct lb_memory *mem)
-
Kerry Sheh