Re: [coreboot] BDX-DE PCI init fail

[Hilbert Tu(杜睿哲_Pegatron)]

Hi Zoran,

The log was just at following link:
http://mail.coreboot.org/pipermail/coreboot/attachments/20171227/b07eb74e/at...
With messages:

MTRR check
        Fixed MTRRs   : Enabled
        Variable MTRRs: Enabled

By the way, I have tried to use U-Boot and Grub2 as payload, but I don't think the payload was executed since it failed at PCI 00:1f.3 init.

-Hilbert

-----Original Message-----
From: Zoran Stojsavljevic [mailto:[e-mail]]
Sent: Saturday, December 30, 2017 2:32 PM
To: Hilbert Tu(杜睿哲_Pegatron)
Cc: David Hendricks; [e-mail]
Subject: Re: [coreboot] BDX-DE PCI init fail
> I still have same issue even tried to comment out the 1f.3 device in
> ./src/mainboard/intel/camel- backmountain_fsp/devicetree.cb then
> rebuild coreboot.

You wrote that you submitted the log. Is this the full log? I doubt. I do NOT see physical memory layout as well as MTRR layout.

Could you, please, submit the full/complete log?

Which payload are you using? SeaBIOS?

Thank you,
Zoran

On Fri, Dec 29, 2017 at 5:58 AM, Hilbert Tu(杜睿哲_Pegatron)
 wrote:
> Hi David,
>
> Thanks for your information.
>
> I still have same issue even tried to comment out the 1f.3 device in
> ./src/mainboard/intel/camelbackmountain_fsp/devicetree.cb then rebuild
> coreboot.
>
> Could you let me know how to do that?
>
> -Hilbert
>
> From: David Hendricks [mailto:[e-mail]]
> Sent: Friday, December 29, 2017 9:46 AM
> To: Hilbert Tu(杜睿哲_Pegatron)
> Cc: [e-mail]
> Subject: Re: [coreboot] BDX-DE PCI init fail
>
> Hi Hilbert,
>
> Have you had any luck? I have a board with a similar problem.
> Commenting out the entry for device 1f.3 in devicetree.cb seemed to
> help (I copied src/mainboard/intel/camelbackmountain_fsp for my project).
>
> On Wed, Dec 27, 2017 at 2:17 AM, Hilbert Tu(杜睿哲_Pegatron)
>  wrote:
>
> Hi,
>
> I am porting coreboot on Intel BDX-DE platform and it gets stuck when
> init PCI 00:1f.3. This device should be SMBus, serial management bus.
> But I don’t know why this happened. Does anyone can give me some hint?
> Attached is my boot up log. Thanks in advance.
>
> -Hilbert
>
> This e-mail and its attachment may contain information that is
> confidential or privileged, and are solely for the use of the
> individual to whom this e-mail is addressed. If you are not the
> intended recipient or have received it accidentally, please
> immediately notify the sender by reply e-mail and destroy all copies
> of this email and its attachment. Please be advised that any
> unauthorized use, disclosure, distribution or copying of this email or its attachment is strictly prohibited.
> 本電子郵件及其附件可能含有機密或依法受特殊管制之資訊，僅供本電子郵件之受文者使用。台端如非本電子郵件之受文者或誤收本電子郵件，請立即回覆郵件
> 通知寄件人，並銷毀本電子郵件之所有複本及附件。任何未經授權而使用、揭露、散佈或複製本電子郵件或其附件之行為，皆嚴格禁止。

This e-mail and its attachment may contain information that is confidential or privileged, and are solely for the use of the individual to whom this e-mail is addressed. If you are not the intended recipient or have received it accidentally, please immediately notify the sender by reply e-mail and destroy all copies of this email and its attachment. Please be advised that any unauthorized use, disclosure, distribution or copying of this email or its attachment is strictly prohibited.
本電子郵件及其附件可能含有機密或依法受特殊管制之資訊，僅供本電子郵件之受文者使用。台端如非本電子郵件之受文者或誤收本電子郵件，請立即回覆郵件通知寄件人，並銷毀本電子郵件之所有複本及附件。任何未經授權而使用、揭露、散佈或複製本電子郵件或其附件之行為，皆嚴格禁止。