[LinuxBIOS] r2607 - in trunk/LinuxBIOSv2: src/mainboard/artecgroup/dbe61 src/mainboard/technologic/ts5300 targets/technologic/ts5300

Author: stepan
Date: 2007-04-12 02:28:32 +0200 (Thu, 12 Apr 2007)
New Revision: 2607

Modified:
   trunk/LinuxBIOSv2/src/mainboard/artecgroup/dbe61/Options.lb
   trunk/LinuxBIOSv2/src/mainboard/technologic/ts5300/Options.lb
   trunk/LinuxBIOSv2/targets/technologic/ts5300/Config-abuild.lb
   trunk/LinuxBIOSv2/targets/technologic/ts5300/Config.lb
Log:
Fix two boards broken by the large patches of late.

artecgroup/dbe61
Add CONFIG_COMPRESSED_PAYLOAD_NRV2B to Options.lb since it's used in
Config.lb.
Change default for CONFIG_PCI_ROM_RUN to 1 so VGA ROM can run.

technologic/ts5300
Removed CONFIG_CONSOLE_VGA, the embedded board has no VGA without the
development addon card anyways.
Changes to target Config.lb so it actually builds.

Signed-off-by: Peter Stuge 
Signed-off-by: Stefan Reinauer 
Acked-by: Stefan Reinauer

Modified: trunk/LinuxBIOSv2/src/mainboard/artecgroup/dbe61/Options.lb
===================================================================
--- trunk/LinuxBIOSv2/src/mainboard/artecgroup/dbe61/Options.lb	2007-04-12 00:12:41 UTC (rev 2606)
+++ trunk/LinuxBIOSv2/src/mainboard/artecgroup/dbe61/Options.lb	2007-04-12 00:28:32 UTC (rev 2607)
@@ -22,6 +22,7 @@
 uses ROM_SECTION_OFFSET
 uses CONFIG_ROM_PAYLOAD_START
 uses CONFIG_COMPRESSED_PAYLOAD_LZMA
+uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
 uses PAYLOAD_SIZE
 uses _ROMBASE
 uses _RAMBASE
@@ -51,7 +52,7 @@
 ### Build options
 ###
 default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=0
+default CONFIG_PCI_ROM_RUN=1
 default CONFIG_VIDEO_MB=8

##

Modified: trunk/LinuxBIOSv2/src/mainboard/technologic/ts5300/Options.lb
===================================================================
--- trunk/LinuxBIOSv2/src/mainboard/technologic/ts5300/Options.lb	2007-04-12 00:12:41 UTC (rev 2606)
+++ trunk/LinuxBIOSv2/src/mainboard/technologic/ts5300/Options.lb	2007-04-12 00:28:32 UTC (rev 2607)
@@ -46,13 +46,6 @@
 uses DEFAULT_CONSOLE_LOGLEVEL
 uses MAXIMUM_CONSOLE_LOGLEVEL

-# VGA support
-uses CONFIG_CONSOLE_VGA
-#uses CONFIG_LEGACY_VGABIOS
-#uses VGABIOS_START
-#uses CONFIG_PCI_ROM_RUN
-
-
 default CONFIG_CONSOLE_SERIAL8250=1
 ## Select the serial console baud rate
 default TTYS0_BAUD=115200

Modified: trunk/LinuxBIOSv2/targets/technologic/ts5300/Config-abuild.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/technologic/ts5300/Config-abuild.lb	2007-04-12 00:12:41 UTC (rev 2606)
+++ trunk/LinuxBIOSv2/targets/technologic/ts5300/Config-abuild.lb	2007-04-12 00:28:32 UTC (rev 2607)
@@ -7,8 +7,6 @@

__COMPRESSION__

-option CONFIG_CONSOLE_VGA=1
-
 romimage "fallback" 
    option FALLBACK_SIZE = 256 * 1024
 #	option ROM_SIZE=512*1024

Modified: trunk/LinuxBIOSv2/targets/technologic/ts5300/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/technologic/ts5300/Config.lb	2007-04-12 00:12:41 UTC (rev 2606)
+++ trunk/LinuxBIOSv2/targets/technologic/ts5300/Config.lb	2007-04-12 00:28:32 UTC (rev 2607)
@@ -7,7 +7,6 @@
 option DEFAULT_CONSOLE_LOGLEVEL=3
 option MAXIMUM_CONSOLE_LOGLEVEL=3
 option CONFIG_COMPRESS=1
-option CONFIG_CONSOLE_VGA=0

#romimage "normal"
 #	option USE_FALLBACK_IMAGE=0