r3062 - trunk/util/superiotool

Author: hailfinger
Date: 2008-01-19 01:32:07 +0100 (Sat, 19 Jan 2008)
New Revision: 3062

Modified:
   trunk/util/superiotool/winbond.c
Log:
This patch is for winbond w83627DHG superio support in superiotool.
I have test that on my board, it works ;)

Signed-off-by: Bingxun Shi 
Acked-by: Carl-Daniel Hailfinger

Modified: trunk/util/superiotool/winbond.c
===================================================================
--- trunk/util/superiotool/winbond.c	2008-01-19 00:04:46 UTC (rev 3061)
+++ trunk/util/superiotool/winbond.c	2008-01-19 00:32:07 UTC (rev 3062)
@@ -143,6 +143,57 @@
    	{EOT}}},
 #endif
    {0xa02, "W83627DHG", {
+		{NOLDN, NULL,
+			{0x02,0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,
+			 0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f,EOT},
+			{0x00,0xa0,NANA,0xff,0x00,MISC,0x00,MISC,RSVD,0x50,
+			 0x00,0x00,RSVD,0xe2,0x21,0x00,0x00,EOT}},
+		{0x0, "Floppy",
+			{0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,0xf2,0xf4,0xf5,
+			 EOT},
+			{0x01,0x03,0xf0,0x06,0x02,0x8e,0x00,0xff,0x00,0x00,
+			 EOT}},
+		{0x1, "Parallel port",
+			{0x30,0x60,0x61,0x70,0x74,0xf0,EOT},
+			{0x01,0x03,0x78,0x07,0x04,0x3f,EOT}},
+		{0x2, "COM1",
+			{0x30,0x60,0x61,0x70,0xf0,EOT},
+			{0x01,0x03,0xf8,0x04,0x00,EOT}},
+		{0x3, "COM2",
+			{0x30,0x60,0x61,0x70,0xf0,0xf1,EOT},
+			{0x01,0x02,0xf8,0x03,0x00,0x00,EOT}},
+		{0x5, "Keyboard",
+			{0x30,0x60,0x61,0x62,0x63,0x70,0x72,0xf0,EOT},
+			{0x01,0x00,0x60,0x00,0x64,0x01,0x0c,0x83,EOT}},
+		{0x6, "Serial peripheral interface",
+			{0x30,0x62,0x63,EOT},
+			{0x00,0x00,0x00,EOT}},
+		{0x7, "GPIO 6",
+			{0x30,0xf4,0xf5,0xf6,0xf7,EOT},
+			{0x00,0xff,0x00,0x00,0x00,EOT}},
+		{0x8, "WDTO#, PLED",
+			{0x30,0xf5,0xf6,0xf7,EOT},
+			{0x00,0x00,0x00,0x00,EOT}},
+		{0x9, "GPIO 2, GPIO 3, GPIO 4, GPIO 5",
+			{0x30,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,0xe8,
+			 0xe9,0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7,0xfe,
+			 EOT},
+			{0x00,0xff,0x00,0x00,0xff,0x00,0x00,0x00,0x00,0x00,
+			 0x00,0xff,0x00,0x00,0x00,0xff,0x00,0x00,0x00,0x00,
+			 EOT}},
+		{0xa, "ACPI",
+			{0x30,0x70,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,
+			 0xe8,0xe9,0xf2,0xf3,0xf4,0xf6,0xf7,0xfe,EOT},
+			{0x00,0x00,0x01,0x00,0xff,0x08,0x00,RSVD,0x1c,0x00,
+			 RSVD,RSVD,0x7c,0x00,0x00,0x00,0x00,0x00,EOT}},
+		{0xb, "Hardware monitor",
+			{0x30,0x60,0x61,0x70,0xf0,0xf1,0xf2,EOT},
+			{0x00,0x00,0x00,0x00,0x81,0x00,0x00,EOT}},
+		{0xc, "PECI, SST",
+			{0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe8,0xf1,0xfe,0xff,
+			 EOT},
+			{0x00,0x48,0x48,0x48,0x48,0x00,0x00,0x48,0x00,0x00,
+			 EOT}},
    	{EOT}}},
    {0x886, "W83627EHF/EF/EHG/EG", { /* sensors-detect: 0x8853 possible */
    	{NOLDN, NULL,