Hi,
I have got LinuxBIOS running on my system. I have got serial console output. I am trying to get the display(VGA) working. However, from the serial output, I see something like -
0000:4002 ILLEGAL EXTENDED X86 OPCODE halt_sys:/home/rohit/LinuxBIOSv2/src/devices/emulator/x86emu/ops2.c line 60
and the VGA display does not start. The execution of LinuxBIOS continues beyond this point but no VGA display. What could be the problem? Someone please reply ASAP.
Regards ,
Rohit.
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments.
WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.
www.wipro.com
rohit.venkatachalam@wipro.com wrote:
Hi,
I have got LinuxBIOS running on my system. I have got serial console
output. I am trying to get the display(VGA) working. However, from the serial output, I see something like -
0000:4002 ILLEGAL EXTENDED X86 OPCODE halt_sys:/home/rohit/LinuxBIOSv2/src/devices/emulator/x86emu/ops2.c line 60
and the VGA display does not start. The execution of LinuxBIOS continues beyond this point but no VGA display. What could be the problem? Someone please reply ASAP.
Regards ,
Rohit.
What kind of hardware is this?
ron